S C ELECTRIC COMPANY Control Module TripSaver II Cutout Mounted Recloser User Guide
- October 27, 2023
- S C ELECTRIC COMPANY
Table of Contents
S C ELECTRIC COMPANY Control Module TripSaver II Cutout Mounted Recloser
Control Module Integration in TripSaver®II CutoutMounted Recloser
The S&C TripSaver® II Controller (Model Number TSII-CONTRL5 and TSII-CONTRL6)
is an electronic control module integrated into to host product TripSaver® II
cutout-mounted recloser which is a self-powered cutout-mounted electronically
controlled single-phase re-closer. It uses a vacuum fault interrupter
technology and is offered in system class voltage ratings of 15kV and 25kV.
The Control module functions remain the same for all TripSaver® II cutout-
mounted recloser configurations and are housed in the TripSaver® II recloser.
The control module processes all electronic/electrical functions required for
the proper operation of the TripSaver® II cutout-mounted recloser. Aside from
its primary functions, the controller can be wirelessly accessed via the IEEE
802.15.4 protocol for performing TripSaver® II cutout-mounted recloser
maintenance Control module’s design, hardware including transceiver and
antenna, software, and communication protocol remains unaltered in all
configurations of TripSaver® II cutout-mounted recloser. The Control module is
an integral part of the TripSaver® II cutout-mounted recloser and will be
integrated by S & C at the factory level. User WILL NOT integrate control
module separately but will receive unit TripSaver® II cutout-mounted recloser
with control module as an integral part of it. The information on 2.4GHz radio
is given below.
Applicant | S & C Electric Company |
---|---|
Brand Name | TripSaver® II Cutout-Mounted Recloser |
Product Model Name | TripSaver® II Controller 5 and TripSaver® II |
Controller 6
Product Model No.| TSII-CONTRL5 and TSII-CONTRL6
FCC Identifier| U3D-TSIICONTRL6
IC Identifier| 5349C-TSIICONTRL6
Type of transmission| Digital Transmission System (DTS)
Rated RF Output| 10 dBm (10 mW)
Frequency Range| 2405 – 2480 MHz
Type of modulation/data rate| GFSK / 1Mbit/s
O-QPSK / 250Kbit/s
Number of Channel(s)| 16 (from 11 to 26)
Antenna(s) & Gain| PCB antenna, Gain: +3.3 dBi
CT Voltage Input| CT input 230 V AC, 2A, 50/60 Hz J10 input 11-14.5 V
DC, 1A
Environmental| – 40°C (-40°F) to +40°C (104°F).
Manufacturer Name & Address| S&C Electric Company 6601 N Ridge Blvd
Chicago, IL 60626
This control module has been granted modular approval for TripSaver® II
cutout-mounted recloser applications. The final host TripSaver® II cutout-
mounted recloser and module combination have been evaluated in a certified lab
for FCC Part 15B criteria for unintentional radiators to be properly
authorized for operation as a Part 15 digital device. Test reports can be
submitted upon request.
Control Module Models:
The Control module of the TripSaver® II cutout-mounted recloser provides
controls and all logic functions for the proper functionality of TripSaver® II
cutout-mounted recloser has 2 distinct models.
- TripSaver® II Controller 5 (TSII-CONTRL5) has the main control board that provides standard 5-second open intervals during TSII reclose sequence.
- TripSaver® II Controller 6 (TSII-CONTRL6) provides an Extended Open interval enabling 30-second open intervals during the TSII reclose sequence. The main control board has no sufficient storage energy to implement this feature. Therefore, the addition of a battery and battery charging/discharging circuitry has been added to supply the necessary energy to the control module
Both Control module of the TripSaver® II cutout-mounted recloser has no changes in the outer enclosure. Overall integration and assembly of the battery, battery board, and main control board are shown in fig. 1.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>