JOY-iT NODEMCU ESP32 Microcontroller Development Board User Manual
- June 6, 2024
- JOY-It
Table of Contents
JOY-iT NODEMCU ESP32 Microcontroller Development Board User Manual
GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you which
things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact us.
OVERVIEW
The NodeMCU ESP32 module is a compact prototyping board and is simple to program via the Arduino IDE. It has a 2.4 GHz dual mode WiFi and a BT wireless connection. Moreover, the microcontroller has integrated: a 512 kB SRAM and 4 MB memory, 2x DAC, 15x ADC, 1x SPI, 1x I²C, 2x UART. PWM is activated at all digital pins.
An overview of the pins can be found in the following picture:
INSTALLATION OF THE MODULES
If Arduino IDE is not already installed on your computer, first download this programm and install it. After that download the updated CP210x USB-UART driver for your operating system and install it. As the next step, you have to add a new board manager. For that follow the following instructions.
1. Click on File → Preferences
2.
Add to the Additional Bords Manager URLs the following link:
https://dl.espressif.com/dl/package_esp32_index.json
You can divide multiple URLs with a comma.
3. Now click on Tools → Board → Boards Manager…
4. Install esp32 by Espressif Systems.
The installation is now completed. You can now choose in Tools → Board the ESP32 Dev Module.
Attention! After the initial installation, tha board rate may have changed to 921600. This could cause problems. In such a case, set the baud rate to 115200 to avoid any problems.
USAGE
Your NodeMCU ESP32 is now ready to use. Simply connect it with an USB cable to
your computer.
The installed libraries provide many examples to gain you some insight into
the module.
These examples can be found in your Ardunio IDE in File → Example → ESP32.
The fastest and easiest way to test your NodeMCU ESP is the recall of device
number. Copy the following code or use the code example GetChipID from the
Arduino IDE:
To upload, click on the upload button from the Arduino IDE and hold down the
BOOT button on the SBC NodeMCU ESP32. The upload is completed unti the
writing has reached 100% and you willbe asked to reboot (hard reset viaRTS pin
…) with the EN key.
You can see the output of the test on the serial monitor.
OTHER INFORMATION
Our Information and Take-back Obligations according to the Electrical And Electronic Equipment Act (ElektroG)
Symbol on Electrial and Electronic Products:
This crossed-out bin means that electrical and electronic products do not
belong into the household waste. You must hand over your old appliance to a
registration place. Before you can hand over the old appliance, you must
remove used batteries and replacement batteries which are not enclosed by the
device.
Return Options:
As the end user, you can hand over your old appliance (which has essentially
the same functions as the new one bought with us) free of charge for disposal
with the purchase of a new device. Small devices, which do not have outer
dimensions bigger than 25 cm can be handed in for disposal independently of
the purchase of a new product in normal household quantities.
1. Possibility of return at our company location during our opening
hours
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn
2. Possibility of return nearby
We will send you a parcel stamp with which you can send us your old appliance
free of charge. For this possibility, please contact us via e-mail at service
@joy-it.net or via telephone.
Information about Package:
Please package your old appliance safe for transport. Should you not have
suitable packaging material or you do not want to use your own material, you
can contact us and we will send you an appropriate package.
SUPPORT
If any questions remain open or problems may arise after your
purchase, we are available by e-mail, telephone and ticket
support system to answer these.
E-Mail: service@joy-it.net
Ticket-system: http://support.joy-it.net
Telephone: +49 (0)2845 98469 – 66 (10 – 17 o’clock)
For further information visit our website: www.joy-it.net
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>