Shenzhen Zhiqi Technology M6 Portable Waterproof Bluetooth Speaker User Manual

**Shenzhen Zhiqi Technology M6 Portable Waterproof Bluetooth Speaker User Manual

**

PREFACE

Dear customers, please read this manual carefully before using the product and keep it properly for later reference!

PACKAGE CONTENT

1. 1*M6 Main device
2. 1* Type-C cable
3. 1*M6 Main device
4. 1* 3.5mm Aux in cable
5. 1* User Manual

KEY FUNCTION DEFINITION

1. Strap hook

2. Power: Long press Turn on/off
   Short press Play/Pause

3. Bluetooth/Phone:
   Long press force to disconnect
   Bluetooth connection
   Short press switch the playback mode
   Answer/Hang off phone call

4. Plus :
   Short press to increase volume
   Long press to next track

5. Minus:
   Short press to decrease volume
   Long press to previous track

6. TWS pairing:
   click to turn on or off party lights.
   Press and hold start or cancel
   TWS interconnection.

7. Type-C interface

8. TF card sloty

9. AUX interface

10. Bluetooth light/Charging light

11. TWS light

OPERATION INSTRUCTION

BLUETOOTH MODE

1. Turn on speaker enter into Bluetooth mode, the Bluetooth light starts to flash. Open the Bluetooth on your device search for “M6” and connect to your speaker. If it’s connected successfully, you will hear a prompt tone that “device paired ”. The Bluetooth light is always on, now you can play music on your device by Bluetooth.
2. When the Bluetooth is connected successfully and you make calls with phone, the voice will automatically enter into the Bluetooth hands-free mode. Short press “ ” key to answer incoming call, Long press to reject call.

AUX IN MODE

Please connect 3.5mm audio cable to the headphone of the phone/computer output interface, short press “ ” key switch to AUX in mode. When you hear a prompt tone “AUX in mode” , then you can play music.

Due to the lower power supply capability, most computer’s USB interface can not meet speaker’s operational requirements. It is not recommended to use the computer’s USB for charging synchronously when you play music in the AUX in mode while connecting computer.

TF CARD PLAY

Please insert TF card in speaker, the speaker will switch mode automatically with a prompt tone “TF card mode”, the speaker will play music saved in card automatically, TF card memory maximum is 32G.

(This mode is only apply to some models, please consult local dealer for details.)

TWS STEREO SOUND PLAY

Turn on two M6 speakers enter into Bluetooth mode. Short press “ ” button of one speaker. TWS light starts to flash, the speaker will automatically search the other for TWS connection, if they connected successfully, two speakers will switch into left and right channels automatically. Repeat the Bluetooth connection operation and connect to phone, If they connected successfully ,music will play on the speaker shows dual stereo sound effect.

Note: This function requires two M6 speakers, make sure both are turned on and in the Bluetooth mode.

No Bluetooth connection to any other devices before TWS paring. When TWS is connected, short press “ ” key of one speaker to cancel the interconnection.

COOL PARTY LIGHTS

Party lights on is defaulted setting when you turn on speaker, Short press “ ” key to turn on/off lights.

TYPE-C CHARGE

• Do not use power adapter that has not been certificated by safety certification.
• Power adapter with output 5V-1A is recommended for charging.
  1. When you hear a prompt tone “Out of battery” ,Please charge speaker as quickly as possible.
  2. This speaker supports self-adaption charging . It’s able to choose charging current automatically according to the external rated power of the adapter, When charging by USB interface on computer, the current is smaller and it takes longer time to complete charging.
  3. When charging, the power lamp breathes, and the power lamp is always on after charging.

KINDLY TIPS:

This product is waterproof on daily basis conditions, and it can washes normally. Do not soak the product in water for a long time(If the product malfunction due to water ingress, our company reserves the right of final Explanation).

ENERGY SAVING:

The speaker will automatically shut down to save power under below circumstances.

1. In Bluetooth mode, after 20 minutes waiting for no device pairing.
2. In TF card and external sound source mode, short press “ ” key pause for 20 minutes without any operation the speaker will shut down automatically,
   Please long press the power key to turn it on again.

TECHNICAL PARAMETERS

Bluetooth version 5.0
Battery capacity 3600mA
Charging voltage 5V/1A
Rated power 20W
Product weight 495g

TROUBLE SHOOTING

1. Can not connect to Bluetooth or no sound when playing music?
   Please make sure the speaker is in Bluetooth mode, and also make sure your device supports Bluetooth function and Bluetooth has already been turned on searching for devices. Check if there are too many Bluetooth devices around ,which might bring difficulties of the searching process. Please turn off other Bluetooth device.

2. What if TF card doesn’t respond ?
   Please make sure TF card is in good quality, and check whether the audio file is MP3 playing format, If all problems above are excluded , it might be TF card compatibility issue, you can consider of formatting TF card to FAT32 or change a different TF card.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept
   any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction

Manufacture: Shen zhen ZhiQi Technology Co., Ltd.
Address: B902 Baochengtai Square, No.38 Qinfu road, Liuyue Community,
Henggang Street,Longgang District,Shenzhen. China

References

• WISEPNT.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>