JOY-iT 2140230 RB-Casep4+01 SBC Housing Compatible with Development Kits User Manual
- June 6, 2024
- JOY-It
Table of Contents
JOY-iT 2140230 RB-Casep4+01 SBC Housing Compatible with Development Kits
User Manual
GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you which
things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to contact us.
CONSTRUCTION
First, the protective film should be carefully peeled off from both sides.
First, glue the feet to the markings on the base plate so that the Raspberry
Pi cannot slide within the case.
The bottom plate has no ventilation holes compared to the lid.
Now place your Raspberry Pi on the base plate. Make sure that the SD card slot
is above the notch of the base plate.
Now insert the side parts.
Now put the cover on the side parts of the case.
Now screw the case together using the screws and the spacers.
Your case is now completely assembled.
OTHER INFORMARTION
Our Information and Take-back Obligations according to the Electrical and Electronic Equipment Act (ElektroG)
Symbol on Electrial and Electronic Products:
This crossed-out bin means that electrical and electronic products do not
belong into the household waste. You must hand over your old appliance to a
registration place. Before you can hand over the old appliance, you must
remove used batteries and replacement batteries which are not enclosed by the
device.
Return Options:
As the end user, you can hand over your old appliance (which has essentially
the same functions as the new one bought with us) free of charge for disposal
with the purchase of a new device.
Small devices, which do not have outer dimensions bigger than 25 cm can be
handed in for disposal independently of the purchase of a new product in
normal household quantities.
-
Possibility of return at our company location during our opening hours
Simac Electronics Handel GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn -
Possibility of return nearby
We will send you a parcel stamp with which you can send us your old appliance free of charge. For this possibility, please contact us via e-mail at pickup @joy-it.net or via telephone, then please dial 02845 93 60 -23
Information about Package:
Please package your old appliance safe for transport. Should you not have
suitable packaging material or you do not want to use your own material, you
can contact us and we will send you an appropriate package.
SUPPORT
If any questions remained open or problems may arise after your purchase, we
are available by e-mail, telephone and ticket support system to answer these.
E-Mail: [email protected]
Ticket-system: http://support.joy-it.net
Telephone: +49 (0)2845 98469 – 66 (10 – 17 o’clock)
For further information visit our website: www.joy-it.net
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn