SHURE RMCE-UNI Remote + Mic UNI Cable User Guide
- June 6, 2024
- Shure
Table of Contents
SHURE RMCE-UNI Remote + Mic UNI Cable User Guide
The ShurePlus RMCE-UNI accessory cable user guide.
Version: 4.0 (2020-J)
RMCE-UNI Shure Remote + Mic UNI Cable
UNI Accessory Cable
Shure UNI cables are designed for continued functionality between mobile devices and your Shure earphones. They feature a 3.5 mm (1/8″) TRRS connector and three button controls with in-line microphone for phone calls and voice applications.
Features
- 3.5 mm (1/8″) cable adapter
- Selectable Android or iOS operation
- Three button control functionality
- In-line microphone
- Legendary Shure quality and reliability
The Universal Switch
The universal switch is located on the base of the three button remote. A|
Android device
---|---
i| iOS
Using the Remote
Use the remote to control compatible media phone players.
Play music| Click the center button once
---|---
Pause music| Click the center button once.
Change volume| Click the volume up (+) or volume down (-) button to
increase or decrease the volume.
Go to next track| Double-click the center button.
Go to previous track| Triple-click the center button.
Restart current track| Triple-click after 6 seconds.
Fast-forward| Double-click and hold the center button.
Send/End Cal| Click the center button once.
For more information about compatible models go to: www.shure.com
Specifications
Connector
3.5 mm (1/8″)
Housing
ABS plastic with TPE strain-relief.
Maximum Cable Length
127 cm (50 in.)
Cable Diameter
3 mm
Net Weight
0.7oz.
Certifications
Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance.
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: [email protected]
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Apple, iPad, iPhone, iPod and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. tvOS is a trademark of Apple Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.