powerbass BT-200 SPLIT Portable Bluetooth Speaker User Guide

BT-200 SPLIT
User’s Manual

Step 1 – Power On Bluetooth Connection

Long•press ‘MASTER’ and ‘SUB·MASTER’ simultano­ ously for 2 seconds, you will hear prompt tool of power on, and they ill b! Allin to connect automatically. AA audible beep will sound when connected successfully. The indicator light of SIJB- MASTER will remain blue, and the master indicator light flashes quickly.

Step 2 – Phone Bluetooth Choose Device

Find “BT-200· In your Bluetooth list and select It.
Step 3 – Pairing Success Bluetooth Indicator

The LED Indicator remains blue once the pairing Is done, music may be played afterward.

TWS Function

Long press MASTER and SUB-MASTER simultaneously for two seconds, you will hear a prompt tone of power on, and they will b! Allin to connect automatically. (Please tum on Bluetooth on your device before 1WS pairing)

Basic Operation

POWER Bl/TTON/MULTI-RJNCTION BUTTON
Power on/oft: Long Press tor 2 seconds Answer/end call: Short Press on MASTER speaker
Reject call: Press twice on MASTER speaker
Resume/pause music: Short Press
Disconnect TWS and Bluetooth: Press 3x to disconnect TWS, then 2x ID disconnect Bluetooth device. (±)0VOWMEBUTTONS
Volume Increase: Short press (±)
Volume decrease: Short press 0
Next track : Long press(±)
Pompous track: Long press 0
note: Both speakers are mutually controlled after pairing.

Interlace Instructions

SWITCH INDICATOR

• Blue LEO flashes quickly when turning on the speaker
• Blue LEO flashes quickly when the speakers are pairing

BLUETOOTH INDICATOR

• Blue LED will remain on after a successful connection.
• The LEO light of the SUB-MASTER will remain on, while the MASTER will flash quickly after successful pairing.
• The Blue LEO flashes CJJlckly H the speakers are beyond range of the Bluetooth source (Until will power off automatically if no connection Is made after 1 O minutes)

CHARGING INDICATOR

• Red LED indicator will remain illuminated while char al no.
• Red LED indicator will tum off after a full charge.
• Red LEO Indicator will flash when the battery Is low.
• The LED Indicator will tum off when powered off.

BT-200 Specifications
Product Name: BT-200 SPLIT
Bluetooth VerSion: 5.0
Barney Capacily: 1500mAh x 2
Play lime: 10-12 hours
Charging lime: 3-4 hours
Driver Units: 10W x 2
Charging Current: 5Y / O.IA
Procu:t Dimensions: 84 x 84 x 210mm
Product Weight: 750g

NOTES:

1. Please read this manual carefully before use.
2. Upon using the speaker for the first Ume, please fully charge the unit.
3. Please use the Included certified adapter which has passed national safety certifications.
4.  Please charge the speaker at least once a month to maintain battery perform, ance.
5. Using this speaker in an extremely cold or hot environment (beyond the range of 104’F to -20′ ) may trigger the auto tum off  D to protect the internal cirC1Jit. F
6.  Clearing this speaker In a high-temperature environment may try! the lager the auto-tum off for charging to protect the battery.  The Power Indicator will nash quickly ID Indicate that the charging environmental temperature or the product Internal temperature Is too high.
7.  Recommended ambient slDrage temperature: -20’F-95’F RH <70% (recommended 1rc :1:s· ).

FAQ
What kind of charger should ire use for the Speaker?
A: While all common USB-C chargers can be used. we suggest 5V/2A or above 2A.
Q: What if there disconnection sound during payback?
A Noma! range of the Bluetooth speaker is 30ft a clear uro since path. Please check if the speaker Is within rape with a clear path
Q: Why did the speaker power off Autonet may without the Bluetech Dalat isn’t.
A: If the weaker is not Plead for banger tan 10nrt t via as Torre sticafty tun off. 0: Why does the speaker not connect to the ance-paired phone or dote? k. Remote ET-203 from your IikeD011 OSte List then restart paling tog 1-3) 0: What Is the start-up mode of the Weaker? k Dank mode is Why wit the speaker not prow up? A: Hugh the charger and reby In a few minutes or by Oolong press the power Cotton Ibr 10-30 seconds to force reset

IMP ORTANT SAFETY INSTRUCTIONS

1. Do not peace distort a repair Fab Snake* Owens it nay cause product damp or peacoat Injury
2. Do not use to the speaker in dual tumid, Oy, an IiiPierriperature envir Onrre.
3. Do not place Ms weaker near a heat wain (Rid sunlit;ht ki a dusty tree an on a vibrating surface.
4. In order tot Mate the ask of Ike. please donee COS If Veit sortie In use (newspapers, curtains MI S. Ns *Wag Is rated IPX7. please do not exceed Fe rootlet para me a/ s (submerged up to 1 meter of water for 30 nerves
5. When any part of to product 4 damaged. such a the Power Call, WOO. HOW entering Inc an object falling at the device, and Is mare Pecoraro namely or his. ft must be repaired
6. When the Induct is fully Charge.

Made in China

Documents / Resources

| powerbass BT-200 SPLIT Portable Bluetooth Speaker [pdf] User Guide
BT-200 SPLIT, Portable Bluetooth Speaker
---|---
| powerbass BT-200 Split Portable Bluetooth Speaker [pdf] User Manual
BT200, 2A6V3-BT200, 2A6V3BT200, BT-200, Portable Bluetooth Speaker, BT-200 Split, Portable Bluetooth Speaker, Split Portable Bluetooth Speaker

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>