powerbass OE65C-GM OEM Replacement Component Speaker User Guide

**

**

powerbass OE65C-GM OEM Replacement Component Speaker

Warning
Continuous exposure to sound pressure levels in excess of 100 dB can cause permanent hearing loss. Power Bass Auto sound Speakers are capable of producing sound pressure levels well over 170 dB. Please observe all local sound ordinances while listening to your Power Bass Auto sound system. Power Bass USA, Inc. accepts no liability for hearing loss, bodily injury, or property damage due to the result of use or misuse of this product

POWERBASS GM OEM Plug & Play FEATURES

•  Injection PP Cone

•  Nylon OEM Speaker Basket

• 1” Silk Dome Tweeter on Coaxials (OE652-GM, OE692-GM)

• 1” Silk Dome Tweeter with Diffuser on Components Kit (OE65C-GM)

• 2.75” High Bandwidth Driver on Component Kit (OE69C-GM)

• 20 oz. Magnet (OE652-GM, OE65C-GM) 35 oz. Magnet (OE692-GM, OE69C-GM)

• Mounting Hardware x2

• Connector for Tweeter x6

• Tweeter Mounting Adapter x4

• Speaker Extension Cable x2 (Female Plug)

OE652-GM, OE65C-SPECIFICATIONS

(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)

Model #| Size| Nominal Impedance| Frequency Response| Sensitivity 1W/1M| Magnet Size| Mounting Depth| Power RMS/ Peak
---|---|---|---|---|---|---|---
OE652-GM| 6.5”| 4-ohm| 70Hz – 20kHz| 88 dB| 20 oz.| 1.6”| 60W/120W
OE65C-GM| 6.5”| 4-ohm| 70Hz – 20kHz| 88 dB| 20 oz.| 1.6 ”| 60W/120W

• Before beginning your installation, thoroughly read this guide and keep it as a reference. It will give you tips on proper placement, wiring, and installation as well as how to obtain the best sound from the Power Bass speakers you have selected.
  

COMPONENT SILK DOME TWEETER SPECIFICATIONS

Dome Size

| Nominal Impedance| Frequency Respone| Sensitivity (1M / 1M)| Power (RMS/Peak)
---|---|---|---|---
1” Silk Dome| 4W| 3K-20Khz| 91 dB| 45/90

OE692-GM, OE69C-GM SPECIFICATIONS

(Due to Constant Improvements, Specifications and Parameters are subject to change without notice.)

Model #| Size| Nominal Impedance| Frequency Response| Sensitivity 1W/1M| Magnet Size| Mounting Depth| Power RMS/ Peak
---|---|---|---|---|---|---|---
OE692-GM| 6×9”| 4-ohm| 65Hz – 20kHz| 89 dB| 35 oz.| 1.85”| 80W/160W
OE69C-GM| 6×9”| 4-ohm| 65Hz – 20kHz| 89 dB| 35 oz.| 1.85”| 80W/160W

Before beginning your installation, thoroughly read this guide and keep it as a reference. It will give you tips on proper placement, wiring, and installation as well as how to obtain the best sound from the Power Bass speakers you have selected.

COMPONENT HIGH-BANDWIDTH DRIVER SPECIFICATIONS

Dome Size

| Nominal Impedance| Frequency Respone| Sensitivity (1M / 1M)| Magnet Size| Power (RMS/Peak)
---|---|---|---|---|---
2.75” Mid Tweeter| 4-ohm| 150Hz – 19kHz| 90dB| 2.5 oz.| 25W/50W

INSTALLATION EXPERIENCE

Installation of Power Bass Auto sound Speakers requires experience with a variety of mechanical and electrical procedures. This manual only provides general installation and operation instructions. If you have any
reservations about your installation skills or lack of the proper tools, please contact your local Power Bass Auto sound dealer for assistance.
TIPS TO GET THE MOST OUT OF YOUR POWERBASS SYSTEM
Your Power Bass Auto sound speakers have been meticulously engineered and designed to handle high power musical reproduction. Despite their rugged construction, it is possible to damage your speaker if they are improperly used. In general, you will hear distortion as a so-called warning before any damage occurs. If you hear distortion in your system, immediately reduce the musical level to the point where the sound retains its clarity.

1.  Be sure you supply the speakers with enough unclipped amplifier power to drive them properly. (More damage can be done to a speaker by under-powering and clipping your amplifier than any other way!)
2.  Where possible, a separate amplifier just for your speaker should be used with an electronic crossover to set the frequency range.
3. When connecting speaker wires from the amplifier or head unit to that of the speaker itself, pay attention to the polarity of the connection. This will insure optimum sound reproduction and performance.

PREPARING FOR INSTALLATION

NOTE:
The tools listed below may be required for proper installation.

• Phillips-head and standard screwdrivers
•  7mm Socket
•  Panel Removal Tools

6X9” SPEAKER INSTALL (OE692-GM, OE69C-GM)

1. Remove door panel to gain access to the factory speaker. Remove the 7mm bolt at the top of the speaker (do not discard this bolt as you will need it to install your new speaker.
   

2. Remove the factory speaker by unclipping it at the top and pulling it forward. Then carefully unplug the speaker and remove from vehicle.
   

3. Plug in you new speaker and clip in starting from the bottom first. Securely mount the new speaker using the 7mm bolt. There are two extra mounting holes at the bot-tom of the speaker that will require drilling new holes to use. These are optional mounting holes.
   

4. Reinstall door panel to complete installation.

6.5” SPEAKER INSTALL (OE652-GM, OE65C-GM)

1. Remove door panel to gain access to the factory speaker. Remove the 7mm bolt at the top of the speaker (do not discard this bolt as you will need it to install your new speaker).
2. Remove the factory speaker by unclipping it at the top and pulling it forward. Then carefully unplug the speaker and remove the vehicle.
3. Plug in you new speaker and clip in starting from the bottom first. Securely mount the new speaker using the 7mm bolt. There are two extra mouting holes at the bot-tom of the speaker that will require drilling new holes to use. These are optional mounting holes
4. Reinstall door panel to complete installation.

COMPONENT TWEETER INSTALL (OE65C-GM)

1.  Remove pillar or panel to gain access to the factory tweeter, unplug and remove tweeter from the vehicle.
2. Unclip or remove factory tweeter from pillar or panel.
3. Locate both the tweeter adapter ring and the correct tweeter plug, attach them to your new tweeter.
4. Install your new tweeter back into the pillar or panel. Plugin your new tweeter and reinstall pillar or panel into vehicle to complete installation.

HIGH BANDWIDTH DRIVER INSTALL (OE69C-GM)

• FRONT 1. Remove cover to gain access to the fac-tory speaker. Remove the two 7mm screws securing the speaker. (Don’t discard these screws as you will need them to install your new speaker) carefully unplug and remove speaker.

• FRONT 2. Plug in and mount your new speaker with the screws you removed from the factory speaker.

• FRONT 3. Reinstall speaker cover.

• REAR 1. Remove panel to gain access to the factory speaker. Carefully unplug and remove panel and speaker.
  

• REAR 2. Remove one/two 7mm screws securing the speaker (Don’t discard these screws as you will need them to install your new speaker) and remove speaker.

• REAR 3. Mount your new speaker with the screws you removed from the factory speaker. Plug in and reinstall panel.

LIST OF COMPATIBLE VEHICLES

OE652-GM | OE65C-GM
Speakers may fit in additional models other than those listed below -To verify fitment for your specific year and model, please see our expanded fitment guide at www.powerbassusa.com

Applications

• Buick Enclave
• Buick LaCrosse
• Buick Lucerne
• Buick Regal
• Buick Verano
• Cadillac ATS
• Cadillac Escalade
• Cadillac SRX
• Chevrolet Avalanche
• Chevrolet Caprice
• Chevrolet Colorado
• Chevrolet Cruze
• Chevrolet Express Van
• Chevrolet HHR
• Chevrolet Impala
• Chevrolet Malibu
• Chevrolet Orlando
• Chevrolet Silverado
• Chevrolet SS
• Chevrolet Suburban
• Chevrolet Tahoe
• Chevrolet Traverse
• Chevrolet Trax
• Chevrolet Volt
• GMC Acadia
• GMC Canyon
• GMC Sierra
• GMC Yukon
• Hummer H3
• Hummer H3T
• Pontiac G6
• Pontiac Solstice
• Saturn Aura
• Saturn Outlook
• Saturn Sky

(MAY NOT FIT IN VEHICLES WITH PREMIUM AUDIO SYSTEMS)

• OE652-GM & OE65C-GM models are designed to work in 4-OHM applications only. Please be sure to verify your OEM speaker impedance before installation.

OE692-GM | OE69C-GM
Speakers may fit in additional models other than those listed below -To verify fitment for your specific year and model, please see our expanded fitment guide at www.powerbassusa.com

Applications

• Buick Enclave
• Buick LaCrosse
• Buick Lucerne
• Buick Regal
• Buick Verano
• Cadillac ATS
• Cadillac Escalade
• Cadillac SRX
• Chevrolet Avalanche
• Chevrolet Caprice
• Chevrolet Colorado
• Chevrolet Cruze
• Chevrolet Express Van
• Chevrolet HHR
• Chevrolet Impala
• Chevrolet Malibu
• Chevrolet Orlando
• Chevrolet Silverado
• Chevrolet SS
• Chevrolet Suburban
• Chevrolet Tahoe
• Chevrolet Traverse
• Chevrolet Trax
• Chevrolet Volt
• GMC Acadia
• GMC Canyon
• GMC Sierra
• GMC Yukon
• Hummer H3
• Hummer H3T
• Pontiac G6
• Pontiac Solstice
• Saturn Aura
• Saturn Outlook
• Saturn Sky

(MAY NOT FIT IN VEHICLES WITH PREMIUM AUDIO SYSTEMS)

• OE692-GM & OE69C-GM models are designed to work in 4-OHM applications only. Please be sure to verify your OEM speaker impedance before installation.

POWERBASS AUTOSOUND LIMITED WARRANTY POLICY

Power Bass USA, Inc. offers limited warranty on PowerBass products under normal use on the following terms:
Power Bass Auto sound Speakers are to be free of defects in material and workmanship for a period of one (1) year. This warranty applies only to PowerBass products sold to consumers by Authorized PowerBass Dealers in the United States of America. Products purchased by consumers from a PowerBass dealer in another country are covered only by that country’s Distributor and not by Power Bass USA. This warranty covers only the original purchaser of PowerBass product. In order to receive service, the purchaser must provide PowerBass with the receipt stating the consumer name, dealer, product and date of purchase. Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at PowerBass’s discretion and will not be liable for incidental or consequential damages. PowerBass will not warranty this product under the following situations:

• Speakers received with bent frames or water damage
• Abuse such as holes in the cone, surround or ripped spider
• Voice coil damage due to amplifier clipping or distortion
• Product that has not been installed according to this owners manual

Any implied warranties including warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for PowerBass any other liability in connection with the sale of this product.
Please call909-923-3868 for PowerBass Customer Service. You must obtain an RA# (Return Authorization Num-ber) to return any product to PowerBass. The RA number must be prominently marked on the outside of the shipping carton or the delivery will be refused. Please pack your return carefully; we are not responsible for items damaged in shipping. Return the defective product along with a copy of the original dated retail sales receipt, plus $12.00 for handling and diagnostic evaluation to:
PowerBass USA, Inc.,
Attn: Returns (RA#__)
2133 S. Green Privado Ontario, CA 91761
Residents of HI, AK and US territories will be charged for return shipping. All inquires regarding service and warranty should be sent to the above address. Removed or altered serial numbers will void this warranty

References

• Power Bass USA ®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>