AIWA SB-X99J Bluetooth Speaker User Manual
- June 6, 2024
- Aiwa
Table of Contents
SB-X99J
User Manual
Important Safety Instructions
- Please do not place the device near any form of heat source.
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to qualified personnel should there be any form of damage to the device.
- Keep this user manual for future reference/ troubleshooting.
- Please heed ALL safety cautions.
Safety Cautions
- Always keep the device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose the device to excessive heat (Direct sunlight etc.).
- Do NOT immerse the device into any form of liquids.
Unboxing
– SB-X99J Speaker
– Micro-USB Cable
– 3.5mm AUX Cable
– User Manual
Product Specifications
Model Number SB-X997
BT Version: V5.0 Supported
Profiles: MP3 WAV APE • FLAC • WMA Power Output SW X 2
Driver Unit: 2•45mm (4f), 2x6W)
Frequency Response: 80kHz- 20kHz
S/N Ratio: a 80dB Supported
Profiles: HFP V15; A2DP V12; AVRCP V1.4; GAVDP V1.2; AVDTP V1.2; SPP V1.2;
AVCTP V1.2
Transmission Distance:10 Meters (No Obstacles)
DC Input Voltage/Current: Micro USB DC 5V/1A Battery 3.7V/ 4000mAH (Li-on)
Playback Time: 8-15 Hours Charging Time: 3-4 Hours
Dimensions: 205×68.7×69.7mm
Weight: 492g
Product Overview
- Battery Indicator
- Bluetooth Indicator
- AUX-In Indicator
- Press change mode among Bluetooth, Aux in, TF
- Volume- (Click once) / Previous Track (Press and hold)
- Play/Pause (Click once)Answer/End Call (Click once) / Reject Incoming Call
- Volume + (Click once) / Next Track (Press and hold)
- Power ON/OFF (Press and hold)
- Micro USB Charging Port
- AUX-In / Reset
- TF card Port
1. Turn on Bluetooth (BT) on your mobile device.
2. Turn on the speaker.
3. Search and connect to “AIWA SB-X993” from your mobile device.
4. Press and hold the Play/Pause button to disconnect.
58-X993 automatically reconnects to the last paired mobile device It was
connected to ISTIW: UP to $ paired de rim)
TWS Function
Synced audio playback from two (2) speakers for a true wireless stereo
experience. (Only compatible with the same speaker model: SB-X993)
- Turn on Bluetooth (Si) on both speakers
- Double click the power button twice on ONE 0) of the speakers until the LED indicator light blinks rapidly in blue. (This speaker will be the MASTER UNIT & LEFT PLAYBACK CHANNEL)
- Both speakers will connect to each other automatically
- Search and connect to “AIWA SB-X99)” (Master Unit) from your mobile device S. Press and hold the “+” & ” -” button together to disconnect.
Listening to music from external audio source AUX-IN Playback
- Turn on SB-X993
- Insert AUX Cable to designated AUX-IN Port
- AUX Indicator Light will light up in green
Speakerphone & Next/Previous Tracks are non-functional under AUX-In Mode.
TF card Mode
Insert your TF card into this port, the speaker will automatically go into TF card mode. It can play the music store on the TF card.
Battery & Charging
Connect charging cable to the speaker and a suitable power source.
Low Battery (<10%): Blinking Red
Charging: Non-blinking Red
Fully charged: Light Extinguished
Approximate Charging Time: 3-4 Hours
Please charge up the speaker fully prior to first-time usage.
SB-X99J powers down automatically after 30 minutes of inactivity.
Performing a Factory Reset Reset the speaker:
If the function buttons are without working, disconnect the charging cable, place a small pin (<3mm) into the reset key and hold it for 2 seconds until the LED light is off.
AIWA Electronics International Co., Ltd.
Explore more at www.int-aiwa.com
https://www.int-aiwa.com/download.php
E- Manu download
Mandrops AG
Bahnhofstrasse 17
96106
Ebern
Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>