SEALEY MS080.V2 Motorcycle Helmet and Gear Tidy Instruction Manual

SEALEY MS080.V2 Motorcycle Helmet and Gear Tidy Instruction Manual

MOTORCYCLE HELMET & GEAR TIDY MODEL NO: MS080.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

8 DO NOT locate this tidy in such a position as to create the risk of injury from contact with the head or any other part of the body.
8 DO NOT overload this tidy; it should only be used for the designed purpose.
8 DO NOT locate in a position where items could fall from the tidy owing to accidental contact.
9 Ensure that the tidy is firmly fixed to the wall using either the masonry fixings supplied or alternative hollow wall fixings (not supplied).
9 Ensure that, when installed, it can be accessed without over-reaching or over-balancing.

2. INTRODUCTION

Powder coated steel construction, for added corrosion resistance. Wall mounting unit designed to organize the storage of gloves, clothing and
helmet(s). Shelf capacity of 15kg and hanging rack capacity of 10kg.

3. SPECIFICATION

Width (top shelf) x Depth:……………………….240mm x 405mm
Width (bottom shelf) x Depth:………………….240mm x 160mm

4. INSTALLATION & ASSEMBLY

4.1. Attach the wall plates to the two shelves using the four bolts provided. fig .2. Ensure the wall plates are perpendicular to the shelves.
4.2. Hold the assembled shelves in the desired position and mark the wall through the four holes. fig.1
4.3. Remove from wall.
4.4. Use proprietary wall fixings that are suitable for the type of wall and the weight of the loaded tidy, (not supplied).
4.5. Drill four holes suitable for the proprietary wall fixings.
4.5.1. Fix the shelves to the wall.

2ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Read More About This Manual & Download PDF:

References

• Sealey - Leading Professional Tool & Workshop Equipment Supplier

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>