aiwa MIX100 Retro X Wireless Speaker User Manual
- June 6, 2024
- Aiwa
Table of Contents
aiwa MIX100 Retro X Wireless Speaker
Important Safety Instructions
- Please do not place device near any form of heat sources.
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to a qualified personnel should there by any form of damage to the device.
- Keep this user manual for future referencing/ troubleshooting.
- Please heed ALL safety cautions.
Safety Cautions
- Always keep device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose device to excessive heat (Direct sunlight etc.).
- Do NOT immerse device into any form of liquids.
Unboxing
– MI-X100 Retro X
– Type-C Charging Cable
– 3.5mm AUX Cable
– Handle
– User Manual
Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.
Product Specifications
| Model Number: | MI-X 100 Retro X |
|---|---|
| BT Version: | V5.0 |
| Power Output: | 20W X 2 |
| Driver: | 3inch 2+2inch 2 |
| Frequency Response: | 120Hz~20kHz |
| S/N Ratio: | 60dB |
| Supported Profiles: | WMA, MP3, FLAC, MAV |
| Transmission Distance (Estimated): | 10 Meters (No Obstacles) |
| DC Input Voltage/Current: | DC 5V/ 2A (Type-C) |
| Battery: | 7.4V/4000mAh (Li-on) |
| Playback Time: | 9-11 Hours (50% Volume) ; 3-4 Hours (100% Volume) |
| Charging Time: | 9-10 Hours |
| Dimensions: | 252160142mm |
| Dimensions: | 2.9KG |
The above playback & charging times are estimated values tested in a practical environment and may vary upon individual usage habits.
Product Overview
- Power ON/OFF
- Function LED Indicator Light
- Charging LED Indicator Light
- Previous Track
- Play/Pause (Click once) / Switch Modes (Press and hold) / Call Control (Click once to Answer & End Call, Press and hold to Reject Call).
- Next Track / Disconnect BT (Press and hold)
- Treble Tuning Knob
- Bass Tuning Knob
- Volume Tuning Knob
- USB Port
- Charging Port (DC 5V) 12. AUX-In
- Battery display
- Phone call
Connecting the Product
- Turn on Bluetooth (BT) on your mobile device.
- Turn on the speaker.
- Search and connect to “AIWA Retro X” from your mobile device.
- Press and hold the “PAIR” button to disconnect BT.
MI-X100 Retro X automatically reconnects to the last paired mobile device it was connected to.
TWS Function
Synced audio playback from two (2) speakers for true wireless stereo experience. (Only compatible with the same speaker model: MI-X100 Retro X)
- Turn on both speakers.
- Press and hold on BOTH speakers until a notification prompt beep is heard.
- TWS (True Wireless Stereo) playback is now available.
- Connect to ONE (1) of the speakers via BT Connection.
- Long press to exit TWS mode.
Listening to music from external audio source
USB Playback
Insert USB Disk into the designated port.
AUX-IN
Connect speaker and Audio source via a 3.5mm AUX Cable.
Press and hold button to switch between different audio sources
Battery & Charging
Connect charging cable to the speaker and a suitable power source. Approximate Charging Time: 8-9 Hours Please charge up the speaker fully prior to first- time usage.
MI-X100 Retro X will enter power-saving mode after 15 minutes of inactivity. Long press “MODE” button for 3 seconds to exit power-saving mode.
Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com
Documents / Resources
| aiwa
MIX100 Retro X Wireless
Speaker
[pdf] User Manual
MIX100, Retro X Wireless Speaker, MIX100 Retro X Wireless Speaker, Wireless
Speaker, Speaker
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>