AIWA MI-X180 Retro Heritage User Manual

June 6, 2024
Aiwa

MI-X180 Retro Heritage
User Manual
Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com

Important Safety Instructions

  1. Please do not place the device near any form of heat source.
  2. Please use the accessories specified by the manufacturer.
  3. Please refer all servicing/repairs to qualified personnel should there be any form of damage to the device.
  4. Keep this user manual for future reference/ troubleshooting.
  5. Please heed ALL safety cautions.

Safety Cautions

  1. Always keep device AWAY from fire and heat sources.
  2. Do NOT attempt to disassemble or alter the device.
  3. Do NOT expose the device to excessive heat (Direct sunlight etc.).
  4. Do NOT immerse the device into any form of liquids.

Unboxing

– MI-X180 Retro Heritage Speaker
– Type-C Charging Cable
– 3.5mm AUX Cable
– Handle
– User Manual
Please refrain from using any damaged components. Contact your local authorized AIWA distributor/customer service should you need any assistance.

Product Specifications

Model Number: MI-X180 Retro Heritage
BT Version: V5.0
Power Output: 40W X 2
Driver: 5 inch1+2 inch2
Frequency Response: 125Hz~16kHz
S/N Ratio: 60dB
Supported Profiles: MP3, WMA, WAV, FLAC
Transmission Distance (Estimated): 10 Meters (No Obstacles)
DC Input Voltage/Current: DC 5V/ 2A (Type-C)
Battery: 6000mAh (Li-on)
Playback Time: 13-14 Hours (50% Volume) ; 5-6 hours (100% Volume)
Charging Time: 8-9 Hours
Dimensions: 300180180mm
Weight: 3.9KG
The above playback & charging times are estimated values tested in a practical environment and may vary upon individual usage habits.

Product Overview

  1. Power ON/OFF
  2. Function LED Indicator Light
  3. Charging LED Indicator Light
  4. Previous Track
  5. Play/Pause (Click once) / Switch Modes (Press and hold) / Call Control (Click once to Answer & End Call, Press and hold to Reject Call).
  6. Next Track / Disconnect BT (Press and hold)
  7. Treble Tuning Knob
  8. Bass Tuning Knob
  9. Volume Tuning Knob
  10. USB Port
  11. Charging Port (DC 5V)
  12. AUX-In
  13. Battery display
  14. Phone call

Connecting the Product

  1. Turn on Bluetooth (BT) on your mobile device.
  2. Turn on the speaker.
  3. Search and connect to “AIWA Retro Heritage” from your mobile device.
  4. Press and hold the “PAIR” button to disconnect BT.

MI-X180 Retro Heritage automatically reconnects to the last paired mobile device it was connected to.

TWS Function

Synced audio playback from two (2) speakers for true wireless stereo experience. (Only compatible with the same speaker model: MI-X180 Retro Heritage)

  1. Turn on both speakers.
  2. Press and hold on to BOTH speakers until a notification prompt beep is heard.
  3. TWS (True Wireless Stereo) playback is now available.
  4. Connect to ONE (1) of the speakers via BT Connection.
  5. Long press to exit TWS mode.

Listening to music from the external audio source

USB Playback
Insert USB Disk into the designated port.
AUX-IN
Connect speaker and Audio source via a 3.5mm AUX Cable.
Press and hold M/ button to switch between different audio sources
Battery & Charging
Connect charging cable to the speaker and a suitable power source.
Approximate Charging Time: 8-9 Hours
Please charge up the speaker fully prior to first-time usage.
MI-X180 Retro Heritage will enter power-saving mode after 15 minutes of inactivity.
Long press the “MODE” button for 3 seconds to exit power-saving mode.

Aiwa Electronics Int’l Co., Ltd.
Explore more at www.int-aiwa.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals