aiwa LED Monitor User Manual
- June 6, 2024
- Aiwa
Table of Contents
aiwa LED Monitor User Manual
Read this manual carefully before use.and retain for future reference. Statement: This document is a reference manual, Please refer to me actual prod= Product features are subject to change without notice.
WARNING
Do not open the back cover to avoid electric shock.No additional spare parts are inside the case. Any questions contact our service personnel.
A triangle With a lightning arrow in:Remind you of probable high voltage here In case of electric shock.
A triangle with an excalmatory mark in :Remind you that the parts here are very important replacement etcis needed,please refer to relevant technical Specifications.
Warning: Do not put the monitor in rainy or foggy places to prevent from fire or electric shock .Do not apply hard objects to attrite or knock on the liquid crystal screen since these may cause scratches or damages.
Warning: Modifying the product without any authorization is forbidden.
NOTE: Excessive sound pressure from earphones and headphones can cause
hearing loss.
SAFETY
Please immediately pull out the AC power plug from an adapter if there is an abnormal sound or smell or the monitor has no picture, and contact after sales support.
The monitor should be kept free from rain, damp and dust to prevent electrical shock and short circuits. Do not cover the ventilation openings with table clothes, curtains, newspapers etc.
The monitor should be kept from high -temperature heating objects or direct sunlight. It requires good ventilation. Allow 10 cm between the monitor and other appliances or built-in cabinet walls.
You may clean the display panel with a soft clean cloth after pulling out the power plug. Do not repeatedly wipe the panel, nor scrape, tap or strike the panel with a hard obj,ect.
Do not wipe the monitor with any petrol, chemical or alcohol-based solvents as it will lead to product damage of the panel and cabinet.
Do not place the monitor on an unstable surface.
Do not place the power cord or other cables across a walkway in case it is trampled on. Do not overload the power cord or power socket.
Do not disassemble the back cover as it contains high voltages inside and will cause electric shock. Internal adjustments and checks should only be conducted by qualified professionals.
Do not place naked flame sources, such as lit candles on or near the motinor. Please pull out the power plug and contact after sales support if there are abnormal objects or water in the monitor.
FUNCTIONS
Statement: This document is a reference manual, Please refer to the actual product.
| HDMI| HDMI input
---|---|---
| VGA| VGA input
| DP input| Display Port input
| AUDIO| AUDIO input
| Earphone| Earphone output
| USB| USB output
| DC 12V| DC 12V power input
CONTROL MONITOR
MENU : MENU KEY.
: LEFT KEY/ Contrast hot key.
: RIGHT KEY / brightness hot key.
AUTO : AUTO/EXIT KEY.
: Power standby KEY.
Function key guide may vary depending on the function or product model. Please refer to the actual product.
TROUBLESHOOTING
Power cannot be turnedon| Check that both ends of the power cable are plugged
into the socket appropriately and the wall socket is operational
---|---
No Input Signalmessage
appears|
- Check that the signal line is connected properly.
- Check that the powerof the relevant peripherals is turned on.
- Check that the Input option that has been selected matches with the input signal.
Image colour or quality
deteriorates|
- Check that all the video settings are adjusted appropriately,
such as brightness, contrast, colour etc
Display warning message|
- Check that the input signal line is properly fixed.
- Select the correct input signal.
Warranty Card
Model:__ Date of purchase:__ Serial/Barcode: __
Customer Information
Name: _ Tel: __ E-Mail: __
Address: ___
GENERAL TERMS & CONDITIONS
- This product is guaranteed against faulty materials and workmanship for a period of twenty-four months from the date of purchase.
- The obligation to the purchaser under this warranty is limited to servicing the unit and replacing defective parts when the product is returned freight prepaid to the retailer.
- This warranty becomes void if the product has been tampered with, damaged by accident, damaged in any other way by improper use or has been purchased second hand.
- All production orders have quality inspections.
- In the unlikely event of a deficiency, please contact the retailer from which this product was purchased.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>