beyerdynamic MMX 100 Closed Back Gaming Headset User Manual
- June 6, 2024
- beyerdynamic
Table of Contents
- SAFETY INSTRUCTIONS
- SERVICE
- SUPPLIED ACCESSORIES
- ACCESSORIES / REPLACEMENT PARTS
- MAINTENANCE
- DISPOSAL
- CONNECT THE MICROPHONE TO THE HEADSET
- CONNECT THE CABLE TO THE HEADSET
- CONNECTING CABLE WITH 4-POLE JACK
- CONNECTING CABLE WITH TWO 3-POLE JACKS
- MUTE AND UN-MUTE THE MICROPHONE
- REPLACING THE EAR PADS
- CHANGING THE VOLUME
- TECHNICAL SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
beyerdynamic MMX 100 Closed Back Gaming Headset User Manual
Congratulations to your Meta Pick! We hope you will enjoy your MMX 100 headset
from beyerdynamic.
Please take some time to read carefully through this manual before using the
product.
ENJOY THE SOUND!
Your beyerdynamic Team
SAFETY INSTRUCTIONS
Risk of injury
▶ We would like to point out that excessively high volumes and long listening
times may cause hearing damage. Hearing defects always constitute an
irreversible impairment of hearing ability. If you suffer from tinnitus, do
not use headphones or reduce the volume.
▶ When connecting the headset, please ensure that the volume is turned down to
minimum. Adjust the volume after putting on the headset.
Danger to life
▶ Headphones drastically reduce perception of external sounds. Using
headphones in road traffic can be potentially dangerous. The user’s hearing
must not be impaired to the extent that it causes road safety risks. Please
also make sure that you do not use the headphones in traffic, especially
within an area of potentially dangerous machines and tools.
▶ Furthermore, avoid using headphones in situations where hearing must not be
affected, especially when crossing a railway crossing or at a construction
site.
Liability / intended use
▶ Do not use the product for any application which is not described in this
product information.
▶ beyerdynamic is not liable for improper use of the product and its
accessories.
SERVICE
▶ If you require service, please contact qualified service personnel or
directly: beyerdynamic Service- und Logistic Center E-mail:
service@beyerdynamic.de
▶ Dismantling the headset yourself will invalidate the guarantee.
SUPPLIED ACCESSORIES
▶1 x 5-pole jack to 4-pole jack cable, 1.2 m (3.9 ft), to connect the headset
to mobile devices
▶ 1 x 5-pole jack to 2 x 3-pole jack cable, 2 m (6.5 ft), to connect the
headset to a computer or console
▶ 1 x Microphone pop shield
ACCESSORIES / REPLACEMENT PARTS
▶ Accessories and replacement equipment can be found at:
www.beyerdynamic.com
▶ If you have technical questions while using the headset or need further
guidance, please visit our FAQ website at:
support.beyerdynamic.com
MAINTENANCE
▶ Use a soft cloth moistened with water to clean the surface.
▶ Make sure that no water enters the headset.
▶ Do not use cleaning agents containing solvents.
▶ Never use a vacuum cleaner for cleaning the headset, as this may cause
irreparable damage.
DISPOSAL
▶ At the end of its operating life this product may not be disposed of along
with normal household waste. Please take it to a designated recycling point
for electric and electronic appliances.
▶ This is indicated by the symbol on the product, the operating instructions
or the packaging.
CONNECT THE MICROPHONE TO THE HEADSET
CONNECT THE CABLE TO THE HEADSET
CONNECTING CABLE WITH 4-POLE JACK
▶ Connect the flat 5-pole jack to the headset and the round 4-pole jack to
your device such as console controllers, external soundcards, notebooks,
tablets etc.
▶ For devices with 1/4″ jack (6.35 mm), please use a third-party adapter. Make
sure that it is a 4-pole adapter, as the microphone will not work with a
3-pole 1/4″ (6.35 mm) TRS adapter.
▶ Caution: Connect the round 4-pole jack connector of the cable to a headphone
socket only! If you connect the headset to any other jack socket, the headset
could be damaged.
CONNECTING CABLE WITH TWO 3-POLE JACKS
▶ Connect the flat 5-pole jack to the headset and the two round 3-pole jack
connectors to a headphone output and microphone input of a PC or notebook,
which have a mini combination jack (3.5 mm).
▶ For devices with 1/4″ jack (6.35 mm), please use one of ours or a third-
party adapter.
▶ Caution: Connect the round 3-pole jack connectors of the cable to a
headphone and microphone socket only! If you connect the headset to any
other jack sockets, the headset could be damaged.
MUTE AND UN-MUTE THE MICROPHONE
▶ Press the button to mute or unmute the microphone.
▶ When muted the button sticks outward.
▶ When unmuted the button is inward.
.
REPLACING THE EAR PADS
▶ To remove the ear pad, gently turn it counter-clockwise and pull it off.
▶ To attach the ear pad, place it onto the orange housing and gently turn it clockwise until it sits tight.
CHANGING THE VOLUME
▶ The headphone volume can easily be increased by turning the control wheel
up.
▶ To decrease the volume, turn the control wheel down.
TECHNICAL SPECIFICATIONS
Headphone
Transducer type . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dynamic
Operating principle . . . . . . . . . . . . . . . . . . . . . . . . . . .
Closed
Sound coupling to the ear. . . . . . . . . . . . . . . Circumoral
Frequency response . . . . . . . . . . . . . . . . . . . . . 5 – 30,000 Hz
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 32 Ω Max. sound pressure level
@1 mW / 500 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . 116 dB
SPL
T.H.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . < 0.5%
Headband pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5 N
Connection . . . . . . . . . . . 5-pole mini jack plug (3.5 mm)
Weight (headphone) . . . . . . . . . . . . . . . . . . . 296 g (10.44 oz)
Microphone
Transducer type . . . . . . . . . . . . . . . . . . Electret condenser
Capsule diameter. . . . . . . . . . . . . . . . . . . . . . . 9.9 mm (0.39″)
Polar pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cardioid
Frequency response . . . . . . . . . . . . . . . . . . . . . 5 – 18,000 Hz
Max. sound pressure level . . . . . . . . . . . . . . . . . . . . . . 118 dB
Signal-to-noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67 dB
your beyerdynamic
www.beyerdynamic.com
beyerdynamic GmbH & Co. KG
Theresienstraße 8 • 74072 Heilbronn / Germany
Phone +49 7131 617-300 • E-Mail
info@beyerdynamic.de
For further distributors worldwide, please go to
www.beyerdynamic.com
Non-contractual illustrations. Subject to change without notice
EN-DE-FR-ES-IT-SV-RU-KO-JA-ZH 1 / MMX 100 / (11.21)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>