HELVIA STILE B200P Gooseneck Microphone Universal Bases User Manual
- June 6, 2024
- HELVIA
Table of Contents
HELVIA STILE B200S – STILE B200P Gooseneck Microphone Universal Bases User
Manual
Please read this manual carefully and keep it for future reference
Unpacking
Thank you for purchasing your STILO B200S / B200P base. Carefully unpack the carton and check the contents to ensure that all parts are present and in good conditions:
- 1x STILO B200S or B200P base
- This User manual
Features and Size
STILO B200S / B200P is a universal base for gooseneck microphones designed for positioning on tables or desks.
It weighs 410g (14.46oz.) and assures high stability even in case of accidental bumps against the microphone. The base is equipped with a On-Off switch (STILO B200S) or Push-to-Talk button (STILO B200P), and green light.
It features 2x 1.5V AA type batteries (not included) to power any condenser or back-electret capsules with 3V Phantom Power. It also accepts any external Phantom power up to 48V coming from the output audio cable.
Features
- Designed for high stability of gooseneck microphone placement
- 410g (14.46oz.) heavy base
- Balanced XLR Input and Output Connectors
- On-Off switch (STILO B200S) / Push-to-Talk button (STILO B200P)
- 3V internal Phantom Power with batteries
- Accepts external +48V Phantom Power
Size
Operating Suggestions
- Microphone head should not be toward speakers, in order to avoid feedback effect.
- Pay attention during gain/volume adjusting, in order to avoid feedback.
- In order to avoid overstretching, wear and tear, never bend the gooseneck more than 90°.
Battery Installation
- Use 2x 1.5V AA-Type Alkaline Batteries.
- Open the cover on base bottom.
- Insert the batteries following the “+” (plus) and “-“ (minus) signs shown inside the battery slot.
- Close the cover.
Specifications
Our products are subject to change. Modifications to technical features
remain subject to change without notice.
This product meets the essential requirements of all applicable European
Directives. Eligible for CE marking.
Warranty and Service
All HELVIA® products are covered by warranty according to European regulations (2 years in the case of purchase by private person – B2C; 1 year in the case of purchase by company – B2B). The warranty is valid from the date of purchase by the end user (private individual or company), indicated in the purchase document (receipt in the case of private person; invoice in the case of company). The following cases / components are not covered by the above warranty:
- All accessories supplied with the product;
- Improper use;
- Failure due to wear and tear;
- Any unauthorized modification of the product by the user or third parties.
HELVIA must meet the warranty obligations due to any non-compliant materials or manufacturing defects, by remedying free of charge at HELVIA’s discretion by either repairing or replacing specific parts or the entire equipment.
This product is imported in the European Union by
FRENEXPORT SPA – Via Enzo Ferrari, 10 – 62017 Porto Recanati – Italy
HELVIA® is a registered trademark of FRENEXPORT SPA – Italy