SHARPER IMAGE OOBE Wireless Earbuds User Guide

: June 6, 2024
: Sharper Image

Table of Contents

QUICK START GUIDE
CHARGE
CONNECT
PLAY TOUCH CONTROLS
ADVANCED
WHAT YOU GET
FIND THE RIGHT FIT
SAFETY WARNINGS
RECHARGEABLE BATTERY WARNING
FCC + LEGAL STATEMENTS
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SHARPER IMAGE OOBE Wireless Earbuds User Guide

SHARPER IMAGE OOBE Wireless Earbuds User Guide

QUICK START GUIDE

SHARPER IMAGE OOBE Wireless Earbuds User Guide - QUICK START
GUIDE

CHARGE

Place the earbuds into the case
For wired charging – connect the charging cable to the earbud case then connect the USB connector to a power source For wireless charging – place the back of the case on a Qi charging base
Blue lights on the case indicate when the case is charging. All 4 LEDs will light up when the case if fully charged
A white LED on earbuds will turn on while charging and turn off when fully charged.

CONNECT

Your device must have BLUETOOTH® capability. Consult your device manufacturer or user manual if you are unsure if your device has this feature.

Turn off any devices that may have been previously paired to the earbuds.
Remove the earbuds from their case and place the earbuds in your ear
Place your device within 3 feet of earbuds
Enable BLUETOOTH® on your device and search for new BLUETOOTH® devices. Refer to your device’s manual on how to enable and operate BLUETOOTH®.
Select SI TWS from the list of BLUETOOTH® available devices
You can now stream music wirelessly from your device to your earbuds.
Note: Your earbuds will automatically pair with your device when the earbuds are removed from their case.

PLAY TOUCH CONTROLS

$SHARPER IMAGE OOBE Wireless Earbuds User Guide - PLAY $TOUCH CONTROLS$$

ADVANCED

TO ENTER PAIRING MODE AND LOOK FOR A BT ENABLED DEVICE Tap four times on one earbud

TO CLEAR PAIRED DEVICE While earbuds are charging, long tap one earbud for 5 second

TO CONNECT TWO EARBUDS Clear paired devices then double tap on each earbud

TO CONNECT 1 EARBUD Power off both earbuds then power the one you want to use

TO SWITCH MICROPHONE BETWEEN EARBUD AND PHONE: Triple tap one earbud

TO SWITCH BETWEEN 2 CALLS Single tap one earbud

TO HANG UP CURRENT CALL WHEN IN 2 CALLS Double tap one earbud

TO RESET Forget earbuds in your device’s Bluetooth setting then reset your device. Place earbuds in their case and turn your device back on.

WHAT YOU GET

SHARPER IMAGE OOBE Wireless Earbuds User Guide - WHAT YOU
GET

FIND THE RIGHT FIT

SHARPER IMAGE OOBE Wireless Earbuds User Guide - FIND THE RIGHT
FIT

Start with the largest size ear tips first and work your way down.
There is an improper seal if:

Earbuds do not stay in during light activity
There is no reduction in outside noise
You experience “distant” sounds

KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE.
Due to continuous product improvements, the pictures on this manual may differ slightly from the actual product.

SAFETY WARNINGS

PLEASE READ BEFORE USE

Not a children’s item. Keep out of the reach of children.
Listening to loud music for extended periods of time may damage your hearing
Do not use earbuds while driving
Always pay attention to your surrounding while using this product
Only use the included power cable for operation.
Do not attempt to use this product for other purposes
Do not expose to extreme temperatures or moisture
Thoroughly inspect products before every use. If the product appears worn, frayed/splintered, cracked, or broken in any manner, discontinue use and discard immediately.

RECHARGEABLE BATTERY WARNING

This product contains batteries that are non-replaceable.
There is a risk of fire and personal injury if battery is punctured, damaged, or misused.
Do not dismantle, crush, incinerate or short-circuit battery.
Never expose battery to extreme temperatures or moisture.
Keep away from flammable materials and direct sunlight.
Only charge using the provided charger, cable, and/or adapters.
Rechargeable battery is only to be charged by an adult.
Adult supervision is required while charging the battery.
Allow battery to cool to room temperature before charging.
Charge on a non-flammable surface and keep away from flammable products.
Discontinue charging if battery becomes hot, swells, smokes, or gives off a strong door.
Battery chargers used with the product are to be regularly examined for
damage to the cord, plug, enclosure, and other parts. In the event of such damage, chargers must not be used until the damage has been repaired.
Recycle or dispose of battery according to federal, state, and local laws.
Keep these instructions for future reference.

FCC + LEGAL STATEMENTS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.