PCE Inst PCE-670PCE-670 Infrared Thermometer User Manual
- June 6, 2024
- PCE Inst
Table of Contents
User Manual
Infrared Thermometer PCE-670
User manuals in various languages (français, Italiano, español, português,
Nederlands, türk, Polski, русский, 中文) can be found by using our product
search on: www.pce-nstruments.com
Safety notes
Please read this manual carefully and completely before you use the device for the first time. The device may only be used by qualified personnel and repaired by PCE instruments personnel. Damage or injuries caused by non- observance of the manual are excluded from our liability and not covered by our warranty.
- The device must only be used as described in this instruction manual. If used otherwise, this can cause dangerous situations for the user and damage to the meter.
- The instrument may only be used if the environmental conditions (temperature, relative humidity, …) are within the ranges stated in the technical specifications. Do not expose the device to extreme temperatures, direct sunlight, extreme humidity, or moisture.
- Do not expose the device to shocks or strong vibrations.
- The case should only be opened by qualified PCE Instruments personnel.
- Never use the instrument when your hands are wet.
- You must not make any technical changes to the device.
- The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner, no abrasives or solvents.
- The device must only be used with accessories from PCE Instruments or equivalent.
- Before each use, inspect the case for visible damage. If any damage is visible, do not use the device.
- Do not use the instrument in explosive atmospheres.
- The measurement range as stated in the specifications must not be exceeded under any circumstances.
- Non-observance of the safety notes can cause damage to the device and injuries to the user.
- Never target any persons or animals with the laser beam.
We do not assume liability for printing errors or any other mistakes in this
manual.
We expressly point to our general guarantee terms which can be found in our
general terms of business.
If you have any questions please contact PCE Instruments. The contact details
can be found at the end of this manual.
Specifications
| Temperature measurement range | -33 … 500°C / -27.4 … 932°F |
|---|---|
| Resolution | -9.9 … 199.9°C / 14.2 … 391.8°F : 0.1°C / 0.18°F |
< 10°C/ 50°F : 1°C / 1.8°F
200°C / 392°F : 1°C / 1.8°F
Accuracy| ± 2% of rdq. or ± 2°C / 3.6°F the greater value applies
Optical resolution| 9:01
Emissivity| 0.95 (fixed)
Laser| Circle laser
Class 2 <1mW
Operating time| About 30 h
Operating conditions| 0 … 30°C / 32 … 86°F, max. 90% rh
Storage conditions| -10 … 40°C / 14 … 104°F, max. 65% rh
Power supply| 1.5V M battery
Display| LC display
Dimensions| 150 x 25 x 27 mm / 5.9 x 1 x 1.1 in
Weight| About 74 g / < 1 lb
Delivery contents
1 x infrared thermometer PCE-670
1 x 1.5V AA battery
1 x User manual
Views
On / off
To switch on the measuring instrument, press the measuring key briefly. To turn off the meter, wait a few seconds. When not in use, the meter will turn off automatically.
Measurement
To make a measurement, target the surface to be tested with the meter. Now press the measuring key After completion of the measurement, release the key. At two-second intervals, a history of the last, the lowest and the highest measured value is now displayed.
How to change the unit
To select one of the units °C and °F, first open the battery compartment. There is a switch above the negative pole of the battery. With this switch, you can choose the desired unit.
Error codes
If measurements are incorrect, the meter displays an error message. These
error messages have the following meanings.
As soon as the measured value is outside the measuring range, “HI” or “LO” is
displayed. If “HI” is displayed, the measured temperature is too high. “LO”
means that the measured temperature is too low.
Er1 means that the ambient temperature is outside the range of -10 … 50 °C. To
correct this error, only work in an environment within -10 … 50 °C. If the
temperature fluctuates considerably, the measuring instrument must acclimatize
for approx. 30 minutes to achieve a reliable measurement result.
Er2 is displayed when the meter is exposed to rapid temperature changes. Allow
the measuring instrument to adapt to the current ambient conditions.
For all other error messages starting from Er 3, you must reset the meter.
Remove the battery for about one minute.
Battery
The infrared thermometer has a battery level indicator. This display shows the current battery power.
The battery is full.| The battery is discharged.
Measurements are still possible.| The battery is completely discharged.
Measurements are no longer possible.
---|---|---
To replace the battery, first, open the battery compartment at the rear side.
Now replace the flat battery with a new 1.5 V AA battery. Observe correct polarity.
Cleaning
The sensor system of the infrared thermometer must always be clean and free from dust. To clean the sensor system, use a cotton swab in order to remove the dust inside the sensor system.
Warranty
You can read our warranty terms in our General Business Terms which you can find here: https://www.pce-instruments.com/english/terms.
Disposal
For the disposal of batteries in the EU, the 2006/66/EC directive of the
European Parliament applies. Due to the contained pollutants, batteries must
not be disposed of as household waste. They must be given to collection points
designed for that purpose.
In order to comply with the EU directive 2012/19/EU, we take our devices back.
We either re-use them or give them to a recycling company that disposes of the
devices in line with the law.
For countries outside the EU, batteries, and devices should be disposed of in
accordance with your local waste regulations.
If you have any questions, please contact PCE Instruments.
PCE Instruments contact information
Germany
PCE Deutschland GmbH
Im Langel 4
D-59872 Meschede
Deutschland
Tel.: +49 (0) 2903 976 99 0
Fax: +49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
United Kingdom
PCE Instruments UK Ltd
Unit 11 Southpoint Business Park
Ensign Way, Southampton
Hampshire
United Kingdom, SO31 4RF
Tel: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9
info@pce-instruments.co.uk
www.pce-instruments.com/english
United States of America
PCE Americas Inc.
711 Commerce Way suite 8
Jupiter / Palm Beach
33458 FL
USA
Tel: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us
Last change: 13 May 2020
v1.0
© PCE Instruments