damson ANC V2 Headphones Over Ear Foldable Wireless and Wired Headset User Guide
- June 6, 2024
- damson
Table of Contents
damson ANC V2 Headphones Over Ear Foldable Wireless and Wired Headset
Parts name
Connection
PAIRING TO FIRST DEVICE.
Press and hold the powe r button to turn the headset on.
Afte r 10 seconds the headset will ente r pairing mode.
Note: If the headset has previous ly been connected to a device, which is
in range , it will automatica lly connect to this and not enter pairni g mode.
MULTI-POINT CONNECTION
Mutli-point allows you to connect two devices to your Damson Headset at the
same time. To connect a second device after you have connected the first to
the headset; Disconnect the connected phone from the headset. The headset will
enter pairing mode. Connect your second device by following the pairing guide
as before.
Note: Only one device will play at a time. A good use case example for Mu
lti-point is when listening to music, or streaming video from a tablet or
laptop and still wanting to receive incoming calls. In this case the
audio/video will be paused on the first device when a call is received
allowing you to choose to answer, or reject, the incoming call.
Charging
BATTERY LOW INDICATOR.
When the battery enters its final 10% of power it will alert you that it
requires charging in 15 minute intervals until the battery runs out completely
or is charged.
The LED will also flash red.
Wired Charging: Please plug Type-C USB into headphone charging port and
connect the other side with USB wall charging adapter or computer.
Note: Always use a Wall socket plug e.g. Smartphone charger, that
provides at least 2.1v 5a of output power. Do not use headphones whilst
charging.
LED indicator turns red while charging, and turns blue when fully charged.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>