MSHILOR MS08 Bluetooth Mass Iron Headphone User Manual
- June 6, 2024
- MSHILOR
Table of Contents
MS08 Bluetooth Mass Iron
Headphone User Manual
IM；I
Music function: Marvel Iron Man
Signature Memorial Edition
After the headset is successfully connected to the phone, you can open the
music player in the phone to play music. In the music mode: Blame
stop/playback: The music layback will be suspended after magnetic suction of
each other, and the music will continue to be played after separating the
headset;
Or short press the earphone multi-function button, which will pause the music
play, short press again will continue to play the music.
Last song: long press,’2 seconds can switch to the last song.
Next song: Long press “+” for 2 seconds to switch to the next song.
Increase volume: press “+” short, with prompts at the maximum volume.
Reduce volume: Short minimum sound is accompanied by a prompt.
Headphone charging
Low power reminder: the indicator light is slowly accompanied by a low power
prompt.
Connect Bluetooth headset and power supply using Type-C.
The red light is often on when charging, and the blue light is often on after
charging. Before charging, turn off the headset, headphones can not be used in
the charging state.
Charging and battery precautions
This product has a nonremovable rechargeable battery built-in.
Do not charge the charging current at 5V/1A,. Do not charge the product with a
charger exceeding 5V/1A, otherwise, it will easily cause damage to the
headphone battery.
- Volume button
- Multi-function / switch press
- The volume reduces the CD
- The microphone
- Fowl Switch
- The LED indicator lamp
- Type-C charging interface
Safety precautions:
To ensure your personal safety, do not wear or place the headset too close to
the pacemaker (less than 10cm). Children shall use the equipment under the
supervision of adults, and the product is not a toy. Using headphones at high
volume, especially for long periods, can cause damage to your hearing.
Name and content of toxic and harmful substances or elements in the product
according to the provisions of SJ/T 11364-2014
Before operating the machine, read the guide carefully and properly for future
reference.
“Product specifications
Version: Bluetooth 5.0
Drive unit:] 0 Hmi fish closed circle unit, high-frequency iron element
Sensor: good switch
Frequency sound range: 20Hz4) KHz
Use distance: about 10 m
Music playback: about 12 hours
Call time: about 12 hours
Standby time: about 180 hours
Charging time: 1-2 hours
Sensitivity: 84dB
Weight: 24g
Battery specification: 110mAh
The above data is the fixed value of laboratory sy, which may be different
according to the actual use. ■ ” The music playback and call time data are
measured in the case of earphone sound B50%.
Product qualification certificate
Date of inspection:
Inspector:____
■ qualified O unqualified
Operating instructions:
Turn on
Long press the earphone multi-function press steady for 3 seconds, accompanied
by the boot prompt sound, complete the boot.
Paired with rustic teeth
Start state, automagically into the pairing mode using the Bluetooth function
device search headset The Bluetooth name “MS08”, click the line to pair °
Turn off
Long press earphone multi-function press and 3 seconds, accompanied by
shutdown prompt sound, complete the United States
Reset the pairing
In the shutdown state, press the desperate state in the dead button for more
than five seconds and enter the Bluetooth pairing mode.
Voice switching
When turning on, press “+” and silver for 2 seconds to switch the voice
prompts in China / English.
Call function
Answer the phone: when the call, short press multi-function press Cui answer.
Hang up the phone: under the call state, short press multi-function and hang
up.
Refuse to answer the phone: when the call is 0 inches, the technical two
seconds multi-function button refused to answer.
Licensor: Pingguo ” Tianjin) Technology Co., Ltd
Address: 201-67, Building 6, Jinbin Chuncheng, Jinbin Industrial Park, Wuhou
District, Tianjin
Manufacturer: Shenzhen Maipulesi Technology Co., Ltd
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>