niceboy ION Smart Kettle User Manual

niceboy ION Smart Kettle User Manual

KETTLE SCHEME

1. Kettle mouth

2. Lid buckle

3. Handle cover

4. Control panel
   Adjust temperature from 40-55-70-85°C

5. Body

6. Handle

7. LED light
   LED light with color changing function indicating different temperature
   
   

8. Power wire

9. Base

SAFETY INSTRUCTIONS

Read all instructions before using.

1. Before connecting the kettle to the power supply, check that the voltage indicated on the appliance (underside the kettle & base) corresponds with the voltage in your home. If this is not the case, contact your dealer and stop using the kettle.
2. Do not let the cord hang over the edge of a table or counter or touch a hot surface.
3. Do not place on or near a hot gas or electric burner or in a heated oven.
4. Do not operate the appliance without anything in it to avoid damaging the heat elements
5. Ensure that the kettle is used on a firm and flat surface out of reach of children; this will prevent the kettle from overturning and avoid damage or injury.
6. To protect against a fire, electric shock or personal injury, do not immerse cord, electric plugs or kettle in water or other liquids.
7. While water is boiling, or just after the water has been boiled, avoid contacting with steam from the spout.
8. Always take care to pour boiling water slowly and carefully without tipping the kettle too fast.
9. Be careful of refilling when the kettle is hot.
10. Children’s should be supervised to ensure that they do not play with the appliance.
11. Do not touch the hot surface. Use the handle or the button.
12. The attached base cannot be used for other than intended use.
13. Extreme caution must be used when moving an appliance containing hot water.
14. The appliance is not a toy. Do not let the children play it.
15. The kettle is for household use only. Do not use outdoors.
16. The use of accessories, which are not recommended by the appliance manufacturer, may result in fire, electric shock or personal injury.
17. Unplug the kettle from the outlet when not in use and before cleaning. Allow the kettle to cool before putting on or taking off parts, and before cleaning the appliance.
18. To disconnect, turn any control to “off”, then remove plug from wall outlet.
19. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
20. Do not use the appliance for other than intended use.
21. The kettle can only use with the stand provided.
22. If the kettle is overfilled, boiling water may spill out.
23. Always ensure the lid is closed and do not lift it while the water is boiling. Scalding may occur if the lid is removed during the brewing cycles.
24. This appliance is intended to be used in household and similar applications such as:
    • Staff kitchen areas in shops, offices and other working environments;
    • Farm houses;
    • By clients in hotels, motels and other residential type environments;
    • bed and breakfast type environments.
25. Avoid spillage on the connector.

BEFORE FIRST USE

If you are using the kettle for the first time, it is recommended that you should clean your kettle before use by boiling the Max capacity of water once and then discarding the water. Wipe the surface with damp cloth.

NOTE: The max capacity of kettle is 1.7L.

WARNING: „Position the lid well so that steam is directed away from the handle“ This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

USING ELECTRIC KETTLE

1. Place the unit on the level surface.

2. To fill the kettle, remove it from the power base and open the lid by pressing the lid release button, fill with the desired amount of water, and then close the lid. Alternatively, the kettle may be filled through the spout. The water level should not exceed MAX marks or sit below MIN level. Too little water will cause the kettle switching off before the water has boiled.
   NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling. Ensure that the lid is firmly in place before plugging the power outlet.

3. Position the kettle on the power base.

4. Connect the plug into a power outlet. Press down the On/Off switch, the indicator will light up. Then the kettle will start to boil the water, once the water is boiled, the On/Off switch will be off automatically. You can shut off the power by lifting On/Off switch at any moment during boiling water. If you want to boil water again, only press down the On/Off switch directly to restart the kettle.
   NOTE: Ensure that the On/Off switch is free of obstructions and the lid is firmly closed, the kettle will not turn off if the switch is constrained or if the lid is opening.

5. Lift the kettle from the power base and then pour the water.
   NOTE: Operate carefully when pouring the water from your kettle as boiling water may result in scald, besides, please do not open the lid while the water is boiling, and position the lid so that steam is directed away from the handle.

6. The kettle will not re-boil until the On/Off switch is pressed down again. The kettle may be stored on the power base when not in use.
   NOTE: Always disconnect the power supply when not use.

7. The heating element surface is subject to residual heat after use.

8. Insert the plug in 220-240V~ power source.

9. Choose function you need from below:

   • Function 1: Press “on/off” button, heating the water to 100 degree
   • Function 2: Press “on/off” button firstly, then press “+/-” button to select the temperature (40-55-70- 85°C) you need. Water can be heated to 100 degree firstly and kept at the temperature you chose.
   • Function 3 : Press “+/-” button firstly to select temperature (40-55 70-85°C) you need, then press “on/off” button. Water can be heated to and kept at the temperature (40-55-70-85°C) you selected.
     To implement this function, please make sure using purified water.

Every function finished, there will be alerting sound. If you need to stop the heating, please press the “on/off” button.

SPECIFICATION

• Model: SmartKettle
• Rated voltage: 220-240V~
• Frequence: 50-60Hz
• Rated Power: 1850-2200W
• Capacity 1.7L

REMOTE CONTROL OF THE APPLIANCE VIA THE NICEBOY ION APPLICATION

The Niceboy ION application allows you to control the appliance remotely in the near area using your smartphone.

1. Download the Niceboy ION APP by your smartphone

2. Connect to WIFI

3. Register

4. If you don‘t have an App account, register an account or sign in with verification code by SMS.

5. Add device-Normal
   Enter the App, tap “+” in the upper right of the page or “Add Device” to enter network connection page, as shown in the picture: Click to “Kitchen Appliance” in the left of the page-“Smart Kettle “in the upper right corner of the page

   • Select the Wi-Fi under which device is working, enter password and tap “Next” to enter network connection process, as shown in the picture below
   • For normal mode, please make sure the device’s indicator light rapidly blinks (2 times per second), click the “Next”, then go on to the next step ( Press the power button for 5 seconds)

Click the ”Done”, then click the “Smart kettle”

CLEANING

1. Always disconnect the appliance from the power outlet and cool it down completely before cleaning.
2. Never immerse the kettle, power cord or power base in water, or allow moisture to contact with these parts.
3. Wipe the appearance of body with a damp cloth or cleaner, never use a poisonous cleaner.
4. Remember to clean the filer at intervals.
   CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the outside of the kettle to prevent the gloss loss.

When not in use, the power cord can be stored at the bottom of the appliance. When not sue or storage, the power cord may be wound under the bottom of kettle.

Removal of mineral deposit

You kettle should be periodically de scaled as the mineral deposits in tap water may form scale at the bottom of kettle interior so as to cause the operation less efficiency. You can use the commercially available descaler and follow the instructions on the package of descaler. Alternatively, you may follow the below instructions to use the white vinegar.

1. Fill the kettle with 3 cups of white vinegar, then add the water to the amount so as to cover the bottom of kettle completely. Leave the solution in the kettle overnight.
2. Then discard the mixture in the kettle, then filling the kettle with clean water, boiling and then discard the water. Repeat several times until the odor of vinegar has been flushed away. Any stains remaining inside the spout can be removed by rubbing with a damp cloth.

Importer to EU: RTB media s.r.o., Pretlucka 16, Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>