MiRiDER MR2 One Folding Electric Bike Instruction Manual

: June 6, 2024
: MiRiDER

MiRiDER MR2 One Folding Electric Bike

About us

Welcome to the fold

Thank you for choosing to join the growing MiRiDER community. We’re sure riding your MiRiDER One will create some amazing new experiences and memories to last a lifetime.

Our detailed User Manual follows. Please take some time to read the Manual, as it will ensure you enjoy your brand new bike and its many features.

However, should you have any unanswered questions or queries, please don’t hesitate to contact us by phone, email, or via the website.

Your enquiry will be handled by the Lancashire based team who have developed the MiRiDER One from day one.

We’re a passionate bunch for both cycling and producing the very best products we can. Constantly testing and developing new ideas for the bike itself and riding accessories, we aim to become the UK’s leading folding eBike brand.

Enjoy your MiRiDER One.

Please read this manual carefully before using the MiRiDER one eBike. This manual will help you understand the bike’s:

Basic operational process
Safety principles
Product structure, its care & use

Bike structure and functions

Telescopic stem
Thumb throttle (right hand side)
LED computer screen
MiRiDER grips
Waterproof Canbus Connectors
Stem folding mechanism
LED headlight
Magnesium fork
Disk brakes
Magnesium frame
Frame folding mechanism
Easy fold pedals
Chainset protection wheel
KMC chain
Puncture Resistant Tyres
250W Hub Motor
Mudguards
Shock absorber
Seat post clamp
Telescopic seat post
Ergonomic seat

Packing list

Items included:

1 x MiRiDER one eBike
1 x Seat saddle
Quick Start Guide
1 x Charger
1 x Battery
2 x Mudguards
2 x Battery locking keys

Before use

It is recommended that you wear protective clothing and appropriate accessories when riding the MiRiDER one eBike.

Instructions for use

Folding the eBike frame
On the lever opposite the folding hinge, press down the red lever then pull the main black handle outwards to release the frame locking mechanism.
To secure the eBike frame
Connect the 2 halves of the frame together and secure by pushing the black locking handle into position firmly until you feel it click into its locked position.
Securing the stem
Lift the handlebar stem upwards until it sits flat on the headset in the upright position.

Secure the hinge by pressing the black lever into the stem firmly until you hear it snap shut.
Adjusting handlebar height
Open the clamp to raise and lower the handlebar height. Make sure the clamp is closed fully before riding. Do not extend higher than the grooved lines
How to insert the seat
Open the seat clamp, as shown in the image above.

Push the seat into the frame to the minimum insertion mark on the seat post then secure the seat post by closing the seat post clamp.
Adjust saddle height
Adjust the seat post height by lifting the lever on the post and adjusting the height to the required level. Then close the lever securing the seat post at this height.
Folding the pedals
To unfold simply pull down the pedal until it clicks into place.

To fold, push the pedal inwards, then lift upwards.
Power On
Press & hold the power button, on the LCD screen for 3 seconds to turn the power on.

Connect the charger into the port if the LCD screen does not activate.

LCD display instructions

The display content is shown as follows.

There are 3 keys on the LCD display, the icons for these keys are:

ON/OFF

Push and hold the power ON/OFF button to activate the display. The same button is to be pushed and held to switch the display off. Note: The display will power itself off 5 minutes of inactivity.

Headlight

Holding the up arrow on the display turns on the display bikes headlight. Push and hold the same button again to switch this lighting off.

Assistance Level

Use the up and down arrows in the display to increase or decrease the power assist level.
When pushing the bike, if you push and hold the down arrow button on the display, walk assist mode will be engaged providing 6km/h (4mph) power assist to aid pushing the bike. As soon as you release the down arrow this assistance will stop.

Thumb Throttle Assist

The thumb throttle can provide a boost from a standing start up to 6km/h (4mph). When continually pedalling the thumb throttle can be used to provide a power maximum power boost, taking the bike up to the maximum speed limit of 25km/h (15.5MPH). If the rider stops pedalling, the throttle boost drops off to 6km/h (4MPH) only. To retain throttle boost, the rider must continuously pedal the bike at the same time as applying the thumb throttle.

Other operations

Uninstalling/Installing the battery

Turn the power off. Fol the eBike frame.

Fold the eBike frame and unlock the battery lock using the battery locking key

Pull out the battery from inside the frame, using the handle, as shown in the image above.

To re-insert the battery, push the battery into position and lock it in place using the locking key.

Maintenance and storage

Ensure the bike is stored in a secure, cool and dry place when not in use.
Do not use any chemical solvents to clean the bike, as this may corrode the surface.
We recommend getting the bike serviced periodically by a qualified bike mechanic or bike retailer and the below checks are followed.

Suggested regular maintenance checks:

Parts	Maintenance checks
Brakes	Ensure the front and back brakes oﬀer suﬃcient stopping power before

use
Tyres| Ensure the tyres have no damage, enough tread and the pressure is suﬃcient (up to 60 psi)
Wheels| Check there is no damage and lateral movement
Shock absorber| Check the shock absorber is free moving with no knocking noise
Throttle| Check the throttle deactivates when released and moves freely
Wires/cables| Ensure there is no visible damage
Screws/bolts| Check for any loose fastenings and tighten as required
Battery| Ensure after a full charge the LCD screen shows the battery indicator being full
Charger| Check that the red light appears when charging and turns to green once fully charged
Chain and Sprocket| Clean regularly and apply bike chain lubricant. Check chain isn’t too slack
eBike| Regularly clean the eBike with a clean, damp cloth

Charging the battery

Option 1: Open the rubber charging port grommet and insert the charging cable. Then plug the charger into the mains and switch on.

Option 2: Fold the bike, remove the battery and plug the charger into the port. Then plug the charger into the mains and switch on.

How to manoeuvre the portable eBike

How to carry and manoeuvre the bike

Ensure the battery is charged between temperatures of 10-45°C
Always store the battery in a safe and dry place, at close to room temperature
Keep the battery away from all water, fire and heat
Do not modify, damage or try to disassemble the battery
Always charge the battery with the supplied charger
Please read the ‘charging the battery’ section before charging the battery
Unplug the charger from the battery once the light shows green
If the charger indicator light stops working, or the charger overheats then unplug the charger immediately and do not use
Ensure the charger does not come into contact with water
Ensure the charger is stored in a safe and dry place, close to room temperature
Do not allow battery level to be completely exhausted
Do not attempt to disassemble or replace any parts of the charger
Do not put the battery or charger in places where it may fall to the ground.
This may cause damage
If the battery or charger become damaged please stop using immediately
Only dispose of batteries according to the local laws and regulations of your region.

Safety advice

Avoid riding the eBike close to all vehicles
MiRiDER-MR2-One-Folding-Electric-Bike-Safety-advice

Throttle is limited to a maximum speed of 6 km/h (4 mph) for safety in public areas
MiRiDER-MR2-One-Folding-Electric-Bike-Safety-advice

Always ride with both hands holding the handlebar
MiRiDER-MR2-One-Folding-Electric-Bike-Safety-advice

Do not ride the bike on stairs or escalators
MiRiDER-MR2-One-Folding-Electric-Bike-Safety-advice

Warnings and precautions

⚠ When Dismaounting your MiRiDER, ensure the bike is powered off, or the speed assistance is set to “0” on the LCD display.

Ensure all protective clothing including a helmet is worn to prevent any injuries
In public areas, it is advised to dismount from the bike
The throttle will deactivate if the rider stops pedalling or the brakes are applied
All safety checks must be undertaken before use
Do not ride in icy conditions
The bike is not a toy and not suitable for children under the age of 14
Do not store the bike in wet, freezing or hot conditions
Ensure all regulations for riding your bike on a public highway are understood before riding
Try to avoid riding in close proximity to other riders or vehicles
Ensure a safe distance is kept with pedestrians, other riders and vehicles at all times
Do not ride backwards
Do not lend the bike to those who have not read the instruction manual
Do not use whilst under the influence of drugs or alcohol
Ensure all brakes are fully functioning before use
Do not clean with a pressure washer. This may damage the bike’s electrical components.

Specifications

Mechanical Configuration	Colour options	White, Orange, Grey
Unfolded size	1340x550x1100mm
Folded size	770x430x640mm
Seat height (from ground)	760-920mm adjustable
Wheelbase	950mm
Net weight (without battery)	17.6kg
Brake system	Front and rear disc brake
Tyre dimension	16×1.95 inch
Frame material	Diecast magnesium frame
Suspension	Rear spring shock absorber
Battery Specification	Battery installment	Built-in/anti-theft

Note:

The total miles is subject to weight, road conditions, temperature and wind speed. The mileage on the eBike is tested under the standard condition of 65kg weight, 25°C, on a flat surface and on level 2 speed
Do not use any other charger to charge the battery, other than the charger supplied with the eBike
Any amendments to the product will void all warranty

Troubleshooting

Problem	Reason	Solution
No power assistance when the eBike is turned on	No power

Check if the battery is installed correctly
Charge the battery

eBike is not providing enough miles|

Battery is not fully charged
Tyre pressure is low
Battery is aged or decreasing after long use
Power mode is set too high

|

Ensure the battery is fully charged
Always check the tyre pressure before use
Reduce the power level whilst riding

Battery cannot be charged| Charger may not be plugged in correctly| Ensure the charger is correctly plugged in to the socket and the jack is plugged in to the port correctly
Display is not working| No power| Ensure the battery has been fully charged
The motor does not work when power is on| The eBike is at a standstill| Ensure the pedals are moving for the motor to power

Warranty

We’re delighted you chose us for your electric cycle, and we’re sure you won’t be disappointed!
To access the full 2 year warranty, you must register your bike by visiting the link below within 30 days of delivery. If the bike is not registered within this time, the warranty will be limited to 1 year.

Please visit www.mirider.co.uk/warranty

MiRiDER eBikes come with a 2 year warranty covering the frame, motor and battery. The 2 year warranty also covers electronic components such as electronic cabling, LCD display, throttle and electric brake cuts offs. There is a 1 year warranty on the charger, lights and all non-wearing mechanical parts.

WHAT IS NOT INCLUDED IN THE WARRANTY?

Warranty claims will not be upheld if any damage or defects are caused by abnormal use, lack of maintenance, accidental damage, prolonged exposure to moisture or liquid, such as the following:
Damage caused by incorrect maintenance
External factors such as shocks, lightning storms, current surges, short circuit, etc
Damage caused by excess exposure to the elements (e.g. rust caused by not storing bike indoors)
Modification of electrical components or any modifications (e.g. additions not included when purchased)
Paint, varnish and bike graphics
Wearing parts such as tyres, brake pads, brake cables, handlebar grips, freewheels etc.

WARRANTIES ARE NON TRANSFERABLE. THE WARRANTY COULD BE VOID IF MAINTENANCE GUIDELINES IN THE MANUAL ARE NOT FOLLOWED.

mirider.co.uk

This product was imported by MiRiDER LTD, Disklok House, Preston Road, Charnock Richard, Chorley, Lancashire, PR7 5HH.

Assembled in the UK.

Disklok House Preston Road Chorley Lancashire PR7 5HH

www.mirider.co.uk
✉support@mirider.co.uk
✆ +44 (0)1257 228242

Documents / Resources

| MiRiDER MR2 One Folding Electric Bike [pdf] Instruction Manual
MR2, One Folding Electric Bike
---|---
| MiRiDER MR2 One Folding Electric Bike [pdf] Instruction Manual
MR2, One Folding Electric Bike, MR2 One Folding Electric Bike