aiwa ESBT-401 Ultralight Neckband Wireless-Earphone Instruction Manual
- June 6, 2024
- Aiwa
Table of Contents
aiwa ESBT-401 Ultralight Neckband Wireless-Earphone Instruction Manual
AUTHENTIC PRODUCT
AIWA CO.,LTD.
TOKYO, JAPAN
BATTERY AND CHARGE
Charging the earphones
The earphones have a RECHARGEABLE built-in lithium-ion polymer battery:
- Insert a micro USB into the MICRO USB CHARGING PORT of the remote control. The LED indicator will turn red during charging.
- The red LED indicator will turn blue once the battery is fully charged
Notes: Before charging make sure the voltage is compatible, Fully charge the device before using it for the first time.
SPECIFICATIONS
-
Bluetooth version: V5.0
-
Bluetooth protocol: A2DP, SPP, AVRCP, HFP, HSP
-
Ingress protection: IPX5
-
Wireless range: 10m (30 ft.)
-
Frequency response: 20Hz-20kHz
-
Sensitivity: ≥98db
-
Battery capacity: 80mAh
-
Battery duration:
180 hours on standby
6 hours of play time -
Charging time: 2 hours
-
Drive impedance: 16 ohm
-
Weight: 13.5g (0.48 oz)
Bluetooth pairing
When you use the earphones for the first time, follow the steps below to pair them:
- Turn on the earphones; a voice prompt will announce “Pairing mode” , and the LED STATUS INDICATOR will flash intermittently in red and blue. This means that the earphones are already searching for another Bluetooth device to pair.
- Turn the Bluetooth function of your smartphone, search for the Bluetooth devices list and select AIWA ESBT-401 . Enter the code “0000” if needed.
- If the device is paired successfully, the LED STATUS INDICATOR will flash in blue slowly, and a voice prompt will notify that the device is connected Having successfully paired the device it will automatically connect to the earphones the next time
Playing music
Once your device and the earphone are paired, you can listen to music through Bluetooth.
- To play or pause the playback, press the MULTI-FUNCTION button once.
- To move forward t o the next track, press and hold the + button (LONG PRESS)
- To go back to the previous track, press and hold the – button (LONG PRESS).
Volume adjustment
- To increase the playback volume, press the + button (SHORT PRESS)
- To decrease the playback volume, press the 一 button (SHORT PRESS).
Notes:
Use your device for additional volume level adjustments.
When reaching the maximum or minimum volume, the earphones will notify it with a voice prompt.
Incoming calls
You can use the earphones to attend to your calls in hands free mode
- To answer an incoming call, press the MULTI-FUNCTION button.
- To hang up a call, press the MULTI-FUNCTION button.
- To reject a call, press and hold the MULTI-FUNCTION button.
CONTROLLER DESCRIPTION
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>