aiwa MI-X450 Pro Enigma 120W Bluetooth Speaker User Manual
- June 6, 2024
- Aiwa
Table of Contents
aiwa MI-X450 Pro Enigma 120W Bluetooth Speaker User Manual
Unboxing
- MI-X450 Pro ENIGMA Speaker
- Remote Control – Microphone
- DC15V 1.6A Charger
- 3.5mm Audio Cable
- Apple Audio Cable
- Android Audio Cable
- User’s Manual
Product Overview
Product Usage Guide
Power ON/OFF
Long press power button
Music Control
- Play/Pause: Click once (1)
- Next Song: Click once (1)
- Previous Song: Click once (1)
Assorted Functions
Record: Insert Micro SD card/ USB into the designated port. Please make sure Microphone is connected. Short press the record button to start/stop recording. (Supports recording accompaniment soundtrack + Microphone input)
Play Recorded Tracks: Long press
Delete Recorded Files: Long press during selected music playback. (Deletes current music playback from recorded files)
Change Playback Mode: Short press power button to switch between BT/AUX/USB/Micro SD card playback
AUX Playback Mode: Insert AUX cable and connect it to audio source to start.
Micro SD Card Playback Mode: Insert Micro SD card into Micro SD port.
USB: Insert USB into the USB Port.
Sound field switch: Click to cycle between Original-Professional-Popu-
lar-Echo sound field profile.
‘Original: PYOF,
Professional: POPF,
Echo: OYIg,
Popular: YEUY
Microphone Delay: Works with all sound field modes except original mode.
Microphone Echo: Works with all sound field modes except original mode.
Special Effects: Users can play special effects through the remote control.
Microphone Priority. Press the mic priority button on the remote control first.
Accompaniment: Press the accompany button on the remote control/ Accompany button on the speaker.
EQ: Double press the play button to cycle between (INDOOR/OUTDOOR SOUND PROFILES)
Monitor/Earphone Function: Simply plug in your earphones/headphones into the monitor port. The speaker will now be muted. Long press the sound field button to unmute speaker. (Playback will commence in both speaker and earphones/headphones.
Mobile Live Broadcast Function: Connect 3.5mm AUX cable from your mobile device to the “LIVE” port on the speaker. Users can now broadcast their voice through the microphone to the connected mobile device. (Signal will be broadcasted from the microphone to the speaker and from the speaker to the mobile device, this is most used for Mobile Platforms Live Streaming Purposes)
Perform Factory Reset
Insert needle into reset button until the speaker powers down.
Connecting The Product
- Turn on Bluetooth (BT) on your mobile device.
- Turn on the speaker.
- Search and connect to “AIWA Engima” from your mobile device.
- Press and hold both Next track button and previous track button together to disconnect.
TWS Function
Power ON/OFF:
- Turn on Both speakers.*LED Screen flashes on both units
- Choose one of the units to function as the “Main unit”, long press “Play” button on this unit and it will enter TWS pairing mode. *LED Screen flashes
- Main unit LED screen flashing slowly + LED screen lights up without flashing indicates successful pairing of both speakers
- Turn on Bluetooth (BT) on your mobile device
- Search and connect to “AIWA Enigma” from your mobile device
- Playback should now commence via both speaker units at the same time.
- Long press “Play” button to disable TWS pairing. *LED Screen flashes
Battery And Charging
Charging the speaker:
Insert DC SV adapter
Red LED Light lights up
Red LED Light extinguishes upon full charge.
Approximate charging time 43 Hours
Product Specifications
- Model Number: MI-X450 Pro ENIGMA
- BT Version: V5.0
- RMS Output:120W
- Frequency Response: 50-15kHz
- S/N Ratio: 70dB
- Distortion THD: 5 10%
- Sensitivity: 95dB + 3dB
- Supports: TF Card, USB,
- Supported Profiles: M P3, WAV, APE, FLAC, WMA
- Transmission Distance (Estimated): 10 Meters (No Obstacles)
- Battery Capacity: 22500mAh
- Playback Time: 3 -8 Hours (Depends on Volume)
- Charging Time: 4 – 5 Hours
Aiwa Electronics Int’l Co., Ltd. Explore more at www.int-aiwa.com