CHIGU Smart Watch G11 User Manual
- June 6, 2024
- CHIGU
Table of Contents
Smart watch
User manual
USER MANUAL
Downloading the App
Please download and install the App on your Smart phone from the following QR code first before using.
Scan QR Code and Download
External description
Charging and Activating
Doric needs to be activated by charging for the first time after open the box.
Put the supplied magnetic suction charging part to the pin on the back of the
device as the following picture shows and connect with charging USB head of
wall charger or the USB port of PC.
Pairing
The device can be identified by its’ MAC address. You can find this MAC
address from Home Screen by slide downward on the touch point.
Once pairing done, the device will automatically connect with smart phone and
sync all data on the App.
Steps & Sports
Steps
Smart Bracelet automatically tracks Steps taken and displays on the screen,
Displays your all-day Calories burned and Distance traveled Note: Your
movementstats reset to zero at midnight.
Sports
Long press on the training page to start a new training measure recording,
there are 24port modes to be chosen. The last training recording will be shown
on the training page.
Heart Rate & Motor Pattern
Motor Pattern
The bracelet can record and display the calories you burn during exercise, as
well as mileage and real-time heart rate information. More detailed analysis
and data records can be viewed in the APP.
Heart Rate
In the heart rate interface of the bracelet, you can display your current
heart rate. More detailed analysis and data records can be viewed in the APP.
Weather & Messages
Weather
It will show today’s weather, air quality. It needs to connect with App so as
to sync to get the updated information Or it can’t if disconnecting with App
for a long time.
Messages
Doric can get the messages of skype, whatsApp, facebook etc shown on your
smart phone but please make correct setting on App and smart phone for
different messager Apps fitst Doric shows the last 3 message record.
Setting & Stop Watch
Setting
Doric also includes other features such as stop watch. brightness adjustment,
Find the phone, factory reset. Power off.
Stop Watch
On stop watch screen, long tapping to start timing and stop it by long tapping
again.
Silent Alarm & Sedentary
Silent Alarm
You can set up 3 different alarm clock on App and Doric will vibrate at the
alarm time you set.
Sedentary
Doric will remind you to walk around after sitting more than 1 hour by
vibrating. You can set it On App to be “ON” or “OFF”.
Getting to Know Your Device
-
Using in Wet Conditions
Your device is water-resistant, which means it is rain-proof and splash-proof and can stand up to even the sweatiest workout.
NOTE: Do not swim with your Smart Watch. We also don’t recommend showering with your wristband; though the water won’t hurt the device, wearing it 24/7 does not give your skin a chance to breathe. Whenever you get your bracelet wet, dry it thoroughly before putting it back on. -
Using the Touch Button
Single tap the Touching Area under the main screen to wake up the device and switch to other functional pages.
Long press the Touching Area to enter for more functions which is needed. -
Using Quick View
With Quick View you can check the time or the message form your phone on your Smart Watch without taping. Just turn your wrist towards you and the time screen will appear for a few seconds.
General Info and Specifications
-
Enviromental Condition.
Operating temperature 14°F to122°F(-10°C to 50°C)
Non-operating temperature -4°F to 140°F(-20°C to 60°C) -
Fit for Wrist Size
For wrist width between 5.5 to 7.7 inches normally -
Materials
Doric’s classic band is made of flexible, durable elastomer material similar to that used in many sports watches with the stainless steel buckle with vacuum vapor plating. Which makes it no color changes with long time usage. -
Wireless Technology
Doric contains Bluetooth 4.0 which enables it to receive message of messager Apps
(WhatsApp, Facebook, Wechat etc) and incoming phone call from your smart phone while sync with smart phone. -
Haptic & Visual Feedback
Doric includes a vibration motor for alarm. Notification, message an incoming phone call for your smart phone. Meanwhile it also has blue light on the top of the display. Which will be ON while in charging as well as for unread notification or message.
Frequently Asked Question
Why is GPS not available on APP?
It is necessary to turn on the GPS function of the mobile phone first. And be
affected by the GPS signal of the mobile phone, it is impossible to receive
the signal in the room. So you need to go to the open place to receive the GPS
signal.
Why does bluetooth fail to connect occasionally?
The bluetooth service of some mobile phones will occasionally appear abnormal
when they start up, resulting in the failure of bluetooth connection.
It is usually possible to set up a connection by restarting the phone or
reswitching bluetooth.
Specification
Screen:1.3′ TFT
Utility time: 7~10 days
Wristband material: Silica gel
Stand-by time: 15 days
Battery capacity: 200mAh
Charging time: about 3h
Bluetooth version: 5.0
Sensor: VC31
System support: Android4.4, iOS9.0 and above
*As the product function is constantly updated, the app user manuaI shall prevail for the specific instructions.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the use’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which on be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.