xiaomi YTC4043GL Light Detection Sensor User Manual
- June 6, 2024
- Xiaomi
Table of Contents
Mi-Light Detection Sensor
User Manual
Product Overview
The Mi-Light Detection Sensor adopts the Zigbee 3.0 wireless communication
protocol, and it detects ambient light intensity and records historical data.
Based on the change of the ambient light intensity (which can be set as a
trigger condition), the sensor can automatically control other smart devices
via the control hub and carry out various intelligent scenarios.
*This product is for indoor use only and needs to be used along with a device with hub capabilities.
Connecting with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app . Control your device, and
interact with it and other smart home devices with the Mi Home/ Xiaomi Home
app.
Scan the QR code to download and install the app. You will be directed to the
connection setup page if the app is installed already. Or search “Mi
Home/Xiaomi Home” in the app store to download and install it.
Open the Mi Home/Xiaomi Home app, tap “+” on the upper right. Select “Mi-Light
Detection Sensor”, and then follow prompts to add your device.
The app is referred to as the Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
http://home.mi.com/do/index.html?model=lumi.sen_ill.mgl01
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
Installation
Effective Range Test: Press the reset button at the desired location. If the
hub beeps, it indicates that the sensor can communicate effectively with the
hub.
Option 1: Place it directly in the desired location.
Option 2: Remove the protective IDIm (an additional adhesive sticker can be
found inside the box) to stick it at the desired location. Option 3: Stick the
sensor onto a metal surface. * Make sure the surface is clean and dry.
Specifications
Model: GZCGQ01LM
Item Dimensions: 40 x 40 x 12 mm
Wireless Connectivity: Zigbee 3.0
Battery Type: CR2450
Operating Temperature: -10°C to 50°C
Operating Humidity: 0-95% RH,
non-condensing
Detection Range: 0-83,000 lux
Detection Accuracy: ±2% (Calibrated with an ordinary incandescent light bulb
at 2854 K)
±5% (Other visible light sources)
Zigbee Operation Frequency 2405 MHz-2480 MHz
Zigbee Maximum Output Power < 13 dBm
EU Declaration of Conformity Hereby, Lumi United Technology Co., Ltd.,
declares that the radio equipment type [Mi Light Detection Sensor, GZCGQ01LM)
is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
http://www.mi.com/global/service/support/declaration.html
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as the terms and conditions of such collection points.
The symbol on the product or on its packaging indicates that this product may
not be treated as household waste. Instead, it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>