V-TAC 8604 LED Table Lamp with Wireless Charger Instruction Manual
- June 6, 2024
- V TAC
Table of Contents
INSTRUCTION MANUAL
LED TABLE LAMP WITH WIRELESS CHARGER
WEEE Number: 80133970
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC Wireless Charger device. V-TAC
will serve you the best. Please read these instructions carefully before
starting the installation and keep this manual handy for future reference. If
you have any other queries, please contact our dealer or local vendor from
whom you have purchased the product. They are trained and ready to serve you
at your best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal
wear and tear. The company gives no warranty against damage to any surface due
to incorrect removal and installation of the product. This product is
warranted for manufacturing defects only.
The wireless charging desk lamp is an intelligent product. It uses an LED
source which is the most advanced lighting-tech with uniform and soft, high
efficiency and CRI, advanced constant current, and flicker-free to protect
your eyes. With 0-300°adjustablearm, the lamp is able to reach almost every
position you can imagine. Also, it has a built-in wireless charger that is
compatible with any Qi-standard phone and device.
This marking indicates that this product should not be disposed of with other household wastes.
https://vtacexports.com/pub/media/ftp-upload/manuals/VT-7705.html
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
TECHNICAL DATA
| MODEL | VT-7705 |
|---|---|
| RATING INPUT | DC:5V/3A |
| INPUT POWER | AC: 100-240V, 50/60Hz |
| COLOR TEMPERATURE | 2700K- 6500K |
| CRI | >80 |
| BRIGHTNESS DIMMING | 3 LEVELS |
| LAMP POWER | 5V, 0.8A (4W) |
| ILLUMINANCE | 800 LUX |
| LONG LIFE | 20,000 HOURS |
| WIRELESS CHARGING OUTPUT | 5V, 1A (5W) |
| ON/OFF CYCLE | >10,000 |
| OPERATION TEMPERATURE | 20 TO 45 |
| TIME TO REACH THE BRIGHTNESS | 2S |
PACKAGE CONTENTS
PARTS INDICATOR
OPERATION GUIDE
-
Put the micro USB port into the power input of the desk lamp
-
Refer to the functions of each button in the previous page (Outline) to use the lamp.
A short press is required to adjust the functions except that brightness increases and decreases need the long press. -
When using the wireless charging function, place phones with Qi receiver onto the wireless charging area. At this time, the wireless charging indicator turns on and flickers to indicate that wireless charging is ON. The indicator turns off after the phone is removed.
OPERATION CAUTIONS
1. Please do not put the lamp on high-temperature surfaces, and do not use it
in a flammable or humid environment to avoid breakdown, short circuits, etc.
2. The adapter must be under the specialized range.
3. Place the base of the table lamp on a steady base while adjusting the arm.
4. The lamp head of the table lamp can be adjusted up to a certain angle
only. Be careful not to overturn the lamp head beyond the adjusting angle in
order to avoid any damage to the lamp.
MAINTENANCE
- Please clean the lamp once every two months to keep it smooth and bright.
- Use a cleaning cloth and water to clean the dust
- For filthy marks, please use a cleaning cloth and soapsuds.
- Please do not clean the lamp with high-volatility and high-corrosive liquid which can lead to discoloring or damaging the lamp.
- To ensure using effect, please use a DC5V/3A adaptor and good quality cable
- Please keep it away from water or other liquid
- Power off the lamp before it is cleaned
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B