wee plug SB7+ Fitness Tracker Bracelet User Manual
- June 6, 2024
- wee plug
Table of Contents
wee plug SB7+ Fitness Tracker Bracelet
FIRST STEP
INTRODUCTION
ADJUSTMENT
CHARGING
STEP 1
STEP 3: Long press the screen to turn ON
USING THE WATCH
On/Off
To turn on your connected watch, press touch button for 3 seconds until
you feel a vibration, then it lights up.
To turn off your connected watch, press touch button for 3 seconds on the
right interface until you feel a vibration, then it goes off.
USE
When the device is in standby mode, press touch button once to turn on the
screen.
To measure your heart rate, when you wear the smart band and enter into the
heartrate interface, it will auto measuring. Check if the plastic protection
on the heart rate sensor is take off. If no, the heart rate frequency will not
be calculate.
BLUETOOTH CONNECTION
HOW TO USE APP
PERSONAL INFORMATION
Once the application is installed, please enter your personal information.
Click user avatar and complete the following information:
- Name
- Gender
- Height
- Weight
- Distance of footsteps
- Birth date
You can also set your goals in the Settings – Goal Settings tab and complete the following information:
- Footsteps
- Distance
- Calories
To set alarm, go to Settings – Alarm setting
CALL AND MESSAGE
-
CALL
When your watch is connected, and the call feature is activated, during a call, your watch will vibrate, and the name of the contact will be displayed on the screen. -
SMS
When you receive SMS, the name of the contact is displayed on the screen, if the sender is not present in your contacts, the number will be displayed on the screen. -
OTHER NOTICES
If the feature is enabled, the watch will vibrate when you receive a Wechat, Whatsapp or Messenger message. -
SEDENTARY REMINDER
You can activate or not “Sedentary Reminder” function, if it is activated, the watch will vibrate to remind you that you have been sitting for a long time.
To use these functions, make sure notifications are activated in settings of your smartphone.
DISPLAY SCREEN
The bracelet is automatically activated when you fall asleep in order to
calculate the quality of your sleep.
Note: The bracelet calculates the quality of your sleep only if you wear
it while you sleep.
CHANGE HOME SCREEN
When you are on the home screen, press and hold the touch button for 3 seconds
to change the home screen.
You have the choice between these 3 following models:
FAQ
Why is there no notification when the function is activated?
ANDROID PHONE: Make sure your smartphone and watch are well connected to each
other. Go to the settings of your smartphone and allow the application “Lefun
Health” to access your data such as contacts, messages and calls.
APPLE PHONE: If you did not receive a notification after log in, please
disconnect your smartphone and try again. When you connect your watch, you
have to wait until a pairing message appears on your smartphone screen and you
need to accept.
WARNINGS
- Do not leave the metal part of the watch in a damp or hot place for a long time.
- When your watch is turned on, the screen goes to sleep after a few seconds, but the device continues to work.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>