BONECO U250 Digital Cool Mist Ultrasonic Humidifier Instruction Manual

: June 6, 2024
: BONECO

Table of Contents

BONECO U250 Digital Cool Mist Ultrasonic Humidifier Instruction Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BONECO U250 Digital Cool Mist Ultrasonic Humidifier Instruction Manual

Read and save these instructions

Always observe all safety notes (included separately in delivery).

TECHNICAL DATA

Power supply voltage	220–240 V~50 / 60 Hz
Power consumption	Standby: 0.1 W

at 230 V ~ 50Hz

FIRST CLEANING

Production-related residue on the water base may lead to foaming, and thereby to water escaping. For this reason, before the first use, the water base must be cleaned with warm water and dish detergent. Then thoroughly rinse the water base under running water.

INTRODUCTION

HEALTHY AIR IS A BASIC NEED.

There is little to which we react with greater sensitivity than poor air. And yet many people do not pay enough attention to air quality, which has consequences for health and quality of life. This makes us all the more pleased that you have chosen a BONECO appliance to ensure that the basic need for healthy room air is satisfied for you and the people around you.

AVAILABILITY OF ACCESSORIES

You can obtain replacements for worn-out accessories as well as additional accessories from:

Your BONECO specialist dealer,
At www.shop.boneco.com or
Directly via the “BONECO healthy air” app.

ITEMS INCLUDED

ITEMS INCLUDED

OVERVIEW AND PART NAMES

Steam output
Water level indicator
Cleaning brush
Function keys
Display
Water tank
A250
Tank cover
A7017 Ionic Silver Stick®
Fragrance container
Power supply

INDICATORS ON THE DISPLAY

INDICATORS ON THE DISPLAY Continued

KEYPAD ON THE APPLIANCE

STARTING UP AND SWITCHING OFF

STARTING UP AND SWITCHING OFF Continued

HUMIDITY AND ULTRASONIC

SAVING SETTINGS

The BONECO U250 saves the last-used settings when it is switched off. However, if the appliance is disconnected from the power outlet for a few seconds, it will start in the AUTO operating mode.

“AUTO” OPERATING MODE

After switching on, the appliance is in AUTO operating mode. The desired relative humidity level (rH) is pre-set to 50% in AUTO operating mode. The appliance selects the suitable performance level Low “L” / Medium “M” / High “H” to reach the rH value of 50% as soon as possible.

In AUTO operating mode, the rH can be modified at any time using the button. If the performance level is modified using the button, the AUTO operating mode switches off automatically, and the appliance is in manual operating mode.

The heater can be switched on or off without the appliance exiting AUTO operating mode. operating mode also remains active when setting AUTO the timer.

To return to AUTO operating mode, tap the symbol once.

CONTROLLING HUMIDITY

The humidity can be set between 30% and 70%. In the “Co” setting (for “Continuous”), the ultrasonic runs regardless of the measured humidity. This means it does not switch off until the tank is empty or the appliance is switched off.

Tap the symbol. The current humidity display starts flashing.
While the display is flashing, tap the symbol again until the desired humidity is set.

The value is applied after a few seconds. The display stops flashing.

CONTROLLING OUTPUT

Tap the symbol multiple times until the desired level appears on the display.

The symbol on the display indicates which of the three levels (low/medium/high) has been selected:

FRAGRANCE CONTAINER

BASICS

Commercially available fragrances and essential oils can be inserted into the fragrance container on the rear side.

Never mix any additives into the water base itself, since doing so can decrease the performance of the BONECO appliance and even cause damage. This damage is not covered by the warranty.

USE

Press down on the fragrance container to take out the drawer.
Sprinkle the felt insert in the drawer with the fragrance of your choice.
Reinsert the fragrance container.

The fragrance container can be cleaned in the dishwasher. The temperature may not exceed 50 °C.

NOTES ON CARE

CARE INSTRUCTIONS

The longer the appliance is operated, the more the performance of the A7017 Ionic Silver Stick® decreases and scale builds up on the inner parts of the BONECO U250. Stagnant water can also impair cleanliness and lead to unpleasant odors. This means regular maintenance and cleaning is necessary to ensure clean and unimpaired operation.

Recommended cleaning and maintenance intervals vary depending on air quality, water quality and operating time.

Use a soft, damp cloth to clean the exterior.

Always unplug the appliance from the power outlet before cleaning.

Interval Task

DESCALING AND CLEANING

ON DESCALING

If stubborn limescale deposits form at the bottom of the BONECO U250, the appliance must also be descaled in addition to the cleaning. For this process, use the provided A7417 “CalcOff” descaling agent. You can obtain a refill of the agent from your BONECO specialist dealer.

The appliance must always be unplugged from the power outlet before draining it. Failure to do so can result in electric shock and pose the risk of severe or fatal injury!

Do not let water get into the ventilation opening! This will damage the appliance.

ON DESCALING

DESCALING THE APPLIANCE

Disconnect the BONECO U250 from the power outlet.
Drain the water base.
Remove the A250 and the A7017 Ionic Silver Stick®.
Mix the CalcOff with approx. 0.5 liters (17 oz) of water and pour the mixture into the humidification chamber.
Wait 30 minutes to allow the solution to take effect.
Clean the BONECO U250 with a dish brush.

CLEANING THE MEMBRANE

Never clean the membrane using sharp objects or aggressive cleaning agents; doing so can damage the BONECO U250 and voids the warranty!

Mineral deposits on the membrane can be removed using the yellow cleaning brush attached inside the base of the BONECO U250.

CLEANING THE MEMBRANE

REPLACING CONSUMABLES

REPLACING THE A7017 IONIC SILVER STICK®

The A7017 Ionic Silver Stick® prevents the growth of bacteria in water, making a vital contribution to health and cleanliness. The A7017 Ionic Silver Stick® is subject to wear and has to be replaced regularly.

The appliance must always be unplugged from the power outlet before draining it. Failure to do so can result in electric shock and pose the risk of severe or fatal injury!

Do not let water get into the ventilation opening! This will damage the appliance.

REPLACING THE A7017

Disconnect the BONECO U250 from the power outlet.
Empty the water tank.
Remove the used A7017 Ionic Silver Stick® and dispose of it with your regular household waste.
Insert the new A7017 Ionic Silver Stick®.
Put the BONECO U250 back together.
Plug the power cord into a power outlet and switch on the appliance.
Delete the message for the replacement by pressing the and buttons and holding them for 3 seconds.

REPLACEMENT

You can obtain replacements from your BONECO specialist dealeror our online store at www.boneco.com.

ON THE A250

PREPARING THE A250

Please observe the accompanying manual for starting up the A250.

ON WATER HARDNESS

The BONECO U250 is supplied with the A250. The granulate contained in it filters the lime out of the tap water so that it is not released into the room air. Hard tap water accelerates saturation of the granulate, making it necessary to replace the A250 earlier.

Dispose of the saturated A250 with your regular household waste.

White dust around the appliance is a sure indication that the A250 is fully worn out.

REPLACING THE A250

The A250 must be replaced every 2 to 6 months. In cases of very hard water, it may have to be replaced sooner. White dust around the appliance is a sure indication that the A250 is fully worn out.

Please observe the accompanying manual for starting up the A250.

The used A250 can be disposed of with your regular household waste.

REPLACEMENT

You can obtain replacements from your BONECO specialist dealer or our online store at www.boneco.com.

www.boneco.com

BONECO is a registered trademark of BONECO AG, Switzerland

BONECO AG, Espenstrasse 85, 9443 Widnau, Switzerland