COMSYNC CS-WN01 Portable White Noise Machine for Travel User Manual
- June 6, 2024
- COMSYNC
Table of Contents
PORTABLE WHITE NOISE
MACHINE FOR TRAVEL
CS-WN01
User Manual
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS.
KEEP FOR FUTURE REFERENCE.
When using an electrical appliance, basic precautions should always be followed, including the following:
-
To ensure a correct and safe installation, usage, and functioning of the product, always follow these instructions carefully and keep them for future reference.
-
Use ONLY the provided USB-C cable and AC power adapter.
-
For stability and enough brightness, ensure an input power of more than 5V 1A by power adapter.
-
The luminaire cannot be replaced, please do not dismantle or modify it by yourself. Otherwise, it will be deemed a waiver of warranty.
Always ask professional electricians or authorized technicians for repair. -
DO NOT place or operate near extreme heat sources, moisture, or corrosive substances.
-
DO NOT operate any light with a damaged cord or after a malfunction occurs, or damage in any manner. Discard the light, or return it to an authorized service facility for examination or repair.
-
Always unplug prior to installation, maintenance, or repair activities.
-
DO NOT remove the power plug with wet hands as it may cause electrical shock.
-
Follow local ordinances and recycling instructions regarding disposal or recycling of the device and device components.
-
If you have any product problems or report an unexpected situation during use, please contact Customer Support at yb.luo@ilifart.com
THIS IS AN ELECTRIC LAMP – NOT A TOY! TO AVOID RISK OF FIRE, BURNS, PERSONAL INJURY AND ELECTRIC SHOCK IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL CHILDREN CAN REACH IT
Specifications
Model | CS-WN01 |
---|---|
Material | PC + ABS + Silicone |
Input | DC 5V 1A |
Power | Light 0.17W, Speaker MAX 2W |
Battery Capacity | 2000mAh |
Waterproof Level | IPX5+C31 (to be evaluated) |
Charging Time | to be measured |
KNOWING YOUR WHITE NOISE MACHINE
- User Manual x 1
- USB-C Cable x 1
FRONT
REAR
USING YOUR WHITE NOISE MACHINE
Short press Press and hold
ON/OFF | Turn-ON/OFF: Short press to turn on/off the white noise machine. | |
---|---|---|
Turn OFF Sounds & Night Light: Press and hold to turn off sounds & night |
light.
Volume Up/ Down| | Short press to control Volume by step (6 Levels).
Sound Selection| | Repeatedly press to cycle 12 sounds.
Night Light Control| | Turn-ON/OFF: Press and hold to turn ON/OFF Night Light.
| Brightness Control: Short press to adjust brightness (50% / 100%).
Auto OFF Timer| | Turn ON:
· Repeatedly press to cycle through 60 -> 120 -> timer OFF.
· When time is up, all sounds, night light, and indicators will turn off.
| Turn-ON/OFF Child Lock :
Press and hold for 5 seconds to turn on/off the child lock.
Factory Reset| | Press and hold and simultaneously for 5 seconds to restore
your white noise machine to factory settings.
Charging Indicator| | Solid red—Charging
Solid green—Fully charged
Flashes red—Low battery
TROUBLESHOOTING
| Wipe with a dry cloth to clean and get rid of dust on a regular basis.
---|---
| Do not immerse in water or liquids.
| The light shall not be collided or crushed.
| Avoid contact with sharp objects and strong chemicals.
| When not in use for a long period of time, it is recommended to store in a
cool, dry location.
WARRANTY AND SERVICE
Thanks for choosing COMSYNC Portable White Noise Machine for Travel.
This product is covered with COMYSNC product and labor warranty for 12 months
from the date of its original purchase.
The warranty will not apply in cases of:
- Accident, misuse, or repairs performed by unauthorized personnel.
- Any unit that has been tampered with or used for commercial purposes.
- Normal wear and tear of wearable parts.
- Use of force, damage caused by external influences.
- Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-compliance with the instructions.
- Partially or completely dismantled appliances.
- Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or any of its parts that have been performed by a repair person not authorized by TaoTronics.
We can only provide after-sales service for products that are sold by TaoTronics or TaoTronics authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.
※Please have your invoice and order ID ready before contacting Customer Support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>