monogram B14427 Beckett Chifforobe Instruction Manual

monogram B14427 Beckett Chifforobe

Product Specifications

• Brand: Beckett
• Model: B14427

Product Usage Instructions

Getting Started
To get started with your furniture piece, follow these steps:

• Unbox the product and lay out all the components.
• Refer to the assembly instructions provided in the manual.
• If you have any questions, contact customer support at NAMESAKEHOME.COM/SUPPORT or 323-909-5019.

Assembly Instructions
Follow these steps for assembling your furniture:

• Refer to the provided assembly instructions labeled as H1, H2, and optional steps.
• Ensure all hardware pieces are accounted for before starting assembly.
• Follow the pictogram instructions carefully for each step of the assembly process.

Anti-Tip Kit Installation
To prevent furniture typeover, it is crucial to install the anti-tip kit. Follow these steps:

• Determine your wall material (drywall, plaster, wood stud).
• Mark attachment holes on the wall according to the instructions provided.
• Securely attach the brackets to both the dresser and the wall.
• Loop the ties provided through both brackets and tighten securely.

Frequently Asked Questions (FAQ)

1. Q: What should I do if my wall material is not listed in the instructions?
   A: If your wall material is not listed or if you have any questions, consult your local hardware store for suitable solutions.

2. Q: Is it necessary to use the anti-tip kit for the furniture?
   A: Yes, it is crucial to install the anti-tip kit provided to prevent furniture tipover risks, especially in households with children.

Beckett

Welcome Home

• We have carefully designed and crafted each piece of furniture to be with your family for years to come.
• Here’s to new memories of bedtime stories, goodnight kisses, holiday mornings, and baby’s first steps.
• From our family to yours,
• Monogram by Namesake

GETTING STARTED

As always, for additional questions, please contact us and we’ll be more than willing to help!

PARTS not to scale

HARDWARE

actual size

ASSEMBLY INSTRUCTIONS

ANTI-TIP KIT INSTALLATION

• Children have died from furniture tipover.
• To reduce the risk of furniture tipover,
• ALWAYS install tip over restraint provided.
• Every detail of this dresser, including drawer extension, has been thoughtfully constructed in accordance with CPSC’s ASTM F2507-23 standard to reduce tip-over risk.

HARDWARE

actual size

• Find your wall material and follow steps to attach the anti-tip kit to your wall
• Drywall or plaster with available wood stud:
• Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the attachment holes with a pencil.
• Drill 1/8-inch (3 mm) diameter pilot holes into the wood stud, on the pencil marks.
• Following the appropriate pictogram instructions on the following pages, drive two screws through the bracket and tighten screws firmly into the wood.

Drywall without available wood stud:

• Holding the bracket 1” to 2” (25-50 mm) below top of dresser, mark the attachment holes with a pencil.
• Drill 3/8-inch (9 mm) diameter holes through the wall, on the pencil marks.
• Drive the plastic anchors into the holes, using a hammer if needed.
• Following the appropriate pictogram instructions on the following pages, drive two screws through the bracket and tighten screws firmly into the plastic anchors in the wall. Do not over-tighten.

If your wall material is not listed here, or if you have any questions, consult your local hardware store.

• Fasten bracket to back of dresser.
• 1-2” (25-50mm) below the top of the dresser and mark holes.
• Follow the “Find Your Wall Material” instructions on the previous page. Drill a 3/8″ (9 mm) hole and insert plastic anchor into hole (If needed
• Fasten second bracket by screwing into plastic anchors or wood stud.
• Loop provided 2 ties through both brackets and secure tightly.
• Drywall without available wood stud.
• Drywall or plaster with available wood stud.

welcome home

• REGISTRATION
  • Registering your product is simple.
• PART REPLACEMENT
  • If you would like to order replacement or missing parts, please visit us at,
• ONE YEAR LIMITED WARRANTY
  • Rest assured, your Monogram by Namesake product is covered under warranty for one year after the date of purchase For more details on our warranty policy, please visit,
  • To clean wood or metal parts, use a lint-free, soft cloth with a non-toxic cleaner. Wipe dry immediately. To avoid scratches or other damages, do not use abrasive chemicals or materials. For fabrics, we recommend using a non-
• toxic foaming fabric cleaner or leather cleaner where appropriate.
  • Touch up kits are available for purchase by contacting us at, 323-909-5019 OR NAMESAKEHOME.COM/PARTS
• STORAGE
  • Because materials respond to temperature and humidity, it is important to store furniture in controlled environments. Furniture should not be placed in direct sunlight or near air-conditioning outlets, radiators, heaters, or humidifiers. Any changes such as extreme heat or cold, dampness, or dryness, may cause noticeable shrinkage or swelling of wood. Direct sunlight may affect the coloring of materials over time.

REVISED 16 NOV 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>