Lyman Borecam PRO Wireless Borescope Instruction Manual
- June 6, 2024
- Lyman
Table of Contents
Lyman Borecam PRO Wireless Borescope
Lyman’s Borecam Pro borescope takes barrel inspection to a whole new level! The wireless Borecam Pro produces its own WIFI signal which sends super clean and detailed images directly to your phone. No wires or monitors to get in the way during use. Carefully inspect your bores for wear, throat erosion, tool marks and other rifling damage, as well as copper or lead fouling. The Borecam Pro will fit 20 caliber and larger barrels and is now equipped with a longer 24” rod. In addition to taking photos, the Borecam Pro now takes sharp, clear videos. The Borecam Pro’s easy-to-use app makes storing and retrieving photos and video simple. Apps are available for iOS and Android phones and tablets.
WARNINGS!
- Make absolutely sure firearms are unloaded and that their actions are open before using this Borescope!
- Always keep firearms pointed in a safe direction during handling.
- Keep any liquids away from the unit. Liquid increases the risk of electrical shock and damage to the unit. Do not immerse in liquids.
- The unit is not shock resistant. Avoid dropping from heights or any types of impacts.
- Do not use the unit in the presence of flammable substances or near electrical wiring.
- The Borescope is designed for the inspection of firearm bores and chambers. It should not be used for other industrial uses. Do not use for any medical inspections.
- Turn off when not in use.
- Only use the supplied power adapter to charge this unit.
- Properly dispose of batteries. Exposure to high temperatures can cause batteries to explode.
FEATURES
• Wireless WIFI operation
• 720P Resolution
• Clean, sharp image
• Fits 20 caliber and larger barrels
• 24” long rod
• Can take photos and video
• Easy to use apps for iOS and Android phones or tablets
CONTENTS
The Borecam Pro should include the following items:
1. Borescope handle and wand
2. Charging Adapter
3. USB Cable
4. Cotton Swabs
5. Lens Cleaning Solution
6. Instruction Manual
GETTING STARTED
The Borescope Pro should be fully charged before use. To charge the Borescope, connect the provided USB cable to the Charging Adapter, then connect the cable to the Borescope. Plug the charging adapter into a power outlet of the appropriate voltage. A red LED light on the back end of the Borescope will go on during charging and will go off when fully charged. When the Borescope is turned on and in use, the LED light will be green.
BASIC OPERATION
To turn on the Borescope Pro camera, roll the power switch on the top of the
handle forward. The LED light will show green. The power switch also controls
the intensity of the camera lights. Rolling the switch fully forward will give
the greatest light level and it will be dimmed as it is rolled back the
opposite direction. For most barrel inspections, the best image will be
obtained as the brightest setting. If you see excessive glare, then dimming
the light often helps.
The button on the handle can be used to either take pictures or video. A quick
press of the button will take a picture. If the button is held down for one
second, a video will start recording. Another one second press will end the
recording.
This button will also blink when attempting to connect to your device. The
button will turn to a steady light when connected.
APP Installation and Operation
To install the APP, open Google Play Store/Apple Store and search for Lyman
Borecam. Install the APP on your phone or tablet. A new icon will then be
displayed for the Borecam APP.
Turn on the Borecam and wait for about 7 seconds, then con-nect to the WIFI
signal from your device’s settings.
Open the Borecam APP and a live image will be displayed. The Borecam wand can
now be inserted into the bore or chamber of your firearm to inspect their
condition.
PHOTOS AND VIDEOS
Taking a photo: simply press the Photo/Video button at the bottom of the APP,
or quickly press the button on the handle of the Borecam. You can also
“freeze” an image for review by pressing the Hand button on the APP. The APP
will then allow you select Save or Cancel. Save will storage the image in your
File Folder, Cancel will return you to the live image.
To take a video: first press the Mode button on the APP to switch to video
function and then press the Photo/Video button. This button will switch to red
showing that a video is being recorded. Press it again to stop recording. A
video could also be recorded by pressing the button on the Borecam handle for
about 1 second. Pressing it again for a second will end the recording.
Review photos or videos: press the File Folder button on the APP to get
playback mode. Select either Photos or Video at the top of the APP, then
select the image/video to review by tapping on the image. You can also Delete
the image/video by selecting it and then tapping on the trash can icon.
Press the back arrow at the top of the APP to return to live image display.
SPECIFICATIONS
Resolution – 720P
Wand Diameter – .19” (4.8mm)
Wand Length – 24” (61cm)
Overall Length – 28” (71cm)
Battery – 3.7V-143mAh
Working Time – 3 hours
Charging Time – 4 hours
Operating Systems – Android 7.0 or above, IOS version 9.0 or above
WARRANTY/REPAIR POLICY
Your Lyman product has been produced under rigid standards of manufacture and inspection. However, if your Lyman product is found to be defective in material or workmanship within one year of delivery to the first retail purchaser, we will repair or replace it without charge.
If you require service under this warranty, please return the complete item along with a letter of explanation, including your complete name and address, freight prepaid to the factory at the address listed below. Your Lyman product will be repaired or replaced and returned to you within 30 days of our receipt. In making any return of a Lyman product to the factory, please be sure it is packaged with proper care to protect it from damage in transit.
We are sorry, but our warranty cannot apply to a defect which results from misuse, abuse, neglect, accident or improper care, or if your Lyman product has been altered or repaired by anyone other than factory personnel.
If the item is out of warranty and is in need of repairs, the Lyman product should also be returned to the same address listed below. Appropriate charges will apply for parts and labor. Estimates are available only when the item has been thoroughly inspected by our repair personnel.
Lyman Products Corporation 475 Smith Street, Middletown, CT 06457 Attn: Service Department
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>