HAYLOU GT1 TWS BT Earphones User Manual

Haylou-GT1
TWS BT Earphones Manual

Overview

**Charging Case What’s in the Box

**

BT earphones, Charging case, EarTips x 2 pairs, Manual, Charging cable.
Earphone
Medium EarTips have been assembled in advance. However, you may try large or small ones, if the medium ones do not fit you well.
When calling, adjust Mic towards mouth to gain clear calling.
Power-on
Take out earphones from the case to power on them. Or touch both panels for 1.5s to power on earphones (LED glows solid white) when they are not in the case.
Power-off
Put earphones into the case to power off them. Or touch both panels for 4.5s to power off earphones. (LED glows solid red for 2s).
Ignore Can
Touch the panel is to ignore the incoming calls. ****

Stereo Mode
Auto pairing. take out both EarBuds from the case and they will auto pair with each other in 2 or 3s. Earphones will be connectable to cellphones when white slowly. On the cellphone, the LED on the right EarBud blinks search for “Haylou-GTl_R” and tap to connect. If earphones fail to be connected to a cellphone, please put EarBuds back to the case and repeat the above steps. Earphones will auto-reconnect to the last device in connectivity records if any.
Note: earphones have been set to the factory when shipping out. Manual pairing: manually power on two EarBuds and they will auto pair with each other when LED blinks white promptly. Then LED on the right EarBud will blink white slowly and now you can tap it on your cellphone to connect .
Mono Mode
Auto pairing takes out one EarBud from the case to power on it. Its LED will soon blink slowly then search for Haylou-GT1 R/L on cellphone and tap to connect. EarBud will auto-reconnect to the last device in connectivity records if any. Note: it may take more time for the left EarBud to reconnect. Manual pairing: manually power on one EarBud. Its LED will soon blink white slowly then search for it on cellphone and tap to connect.

How to Charge

Prior to using, please peel off the sticker on the pogo pins and top up the earphones.
Play/pause When standby, touch the panel to pause/play music. Note: media player should run in the background.
Voice Assistant When standby, triple touch the panel to activate the voice assistant.
Note : device needs to support voice assistant and fast awakening be turned on.
 Answer/End Call Double touch the panel to answer an incoming call and double touch the panel again to end it.
Skip Track Forward/backward
Touch the panel on the right earbud twice to skip track forward. Touch the panel on the left earbud twice to skip track backward.
Three-way Calling & Switch
Touch the panel twice to answer incoming calls from the phone. if another call is coming in sync, touch the panel to put the first call on hold while activating the second one. Double touch the panel to switch between an active call and held call.
Switch Audio Output
When calling, touch the panel for is to switch the audio output between earphones and cellphones.
Factory Setting
If earphones do not function well, please refer to the following steps to reset the factory: take EarBuds out from the case. Power off the earphones then toch both panels for about 15s ( LED will blink red and white three times twice). After that, put them back to the case. Delete connectivity record on the cellphone before processing another pairing. (All connectivity records relating to the EarBuds will all be removed )

Basic Parameters

Operation range: 10m(with no obstacle)
Battery capacity: 43mAh(single EarBud)
Changing time: approx. 1.5hr
Calling time: approx. 3.5hr
Standby time: approx. 150hr
Input parameter: 5V =100mA
Battery Type: Li-ion
Wireless connection: BT 5.0
Charging case
Input parameter:5V =500mA
Output parameter:5V =150mA
Charging time: approx. 2hr
Standby time: approx. 4 months
Battery capacity: 310mAh
Battery Type: Li-ion

Caveats

1. Never disassemble or modify your headset for any reason to avoid any damages and danger.
2. Do not store the headset in extreme temperatures (under 0°C or over 45°C).
3. Avoid using the indicator close to the eyes of children or animals.
4. Do not use this headset during a thunderstorm to avoid irregular function and increased risk of electric shock.
5. Do not use harsh chemicals or strong detergents to clean the headset. 6. Keep the headset dry.
   

Warranty Card

Warranty Period 12 months after the next day receiving this item. Free exchange service will not be accessed under the following circumstances:

1.  Damages caused unauthorized disassembly.
2. Defects or physical damages caused by leaking or dropping off.
3. Damages by an act of God. Supposing your item is within any damages or defects except the above circumstances, please return to us or your distributor for free repairing.

Tips

1. Before using the headset, please read the manual carefully and keep it for future references.
2. The headset needs to be fully charged prior to first-time use.
3. If the headset is left unused for over two weeks, please recharge it periodically.
4. Please use the chargers made by a qualified manufacturer.
5. If the headset cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the headset will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the headset occurs, reboot or reset it.

Address: Suite 1303,1305 and 1306,13/F, Project Phrase 2 of Gaosheng Tech Tower, Gaosheng Tech Park, No.5 Longxi Road, Zhouxi Community, Nancheng District, Dongguan City, Guangdong, China.
Manufacturer. Dongguan Liesheng Electronic Co., Ltd.
Web: www.haylou.com
Perform standard: Q/LS 1-2018 Made In China
Hazardous substances and their contents in the item

This form is made by SJ/T 11364 regulation.
0: means that hazardous substance content in the homogeneous materials of this part is within the limits of GB/T 26572 regulation.
X: means that hazardous substance content in, at least, one certain homogeneous material of this part is beyond the limits of GB/T 26572 regulation.
Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time.

EU Declaration of Conformity Hereby, Liesheng Inc., declares that the radio equipment type LYEJO5LM is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: HTTP://
In addition, for a portable sound system, the instructions shall include a warning that excessive sound pressure from earphones and headphones can cause hearing loss.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
To prevent possible hearing damage, do not listen at high volume levels for long periods.
WEEK
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.ERE
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>