esonstyle S22 Wireless Bluetooth Stereo Headset User Manual
- June 6, 2024
- esonstyle
Table of Contents
esonstyle S22 Wireless Bluetooth Stereo Headset
Function Overview
On/Off
- Power on: Slide the power button with the voice prompts, The red blue lights flash alternately
- Power off: Slide the power button, The indicator is off.
Charging
- Charge the headphone with USB SV, The red light indicator is on, The light will be off when full charged
- The battery voltage is lower than 3.2V with low battery voice prompts, The headphone will be power off when the voltage is 3.1 V
Connect Bluetooth
Pairing
Automatically enter the pairing mode and re-connect mode. It takes 4 seconds to re-connect the previous Bluetooth device.The pairing/reconnect time is 5 minutes, The headphone will power off unpaired successfully in 5 minutes Indicator blue and red lights flash alternately.
Pairing success
The indicator light flashes once every 5 seconds.
Pairing failed
The headset automatically shuts down in 5 minutes when the power is not paired and there is no operation.
Reconnect automatically
The headphone automatically connects back the last connected device.
Indicator light: Blue light blinking slowly
Automatic shut-down
The headphone automatically shuts down in 5 minutes without paired device.
Reconnect from headphone
When headphone disconnect with the phone, restart the headphone will reconnect automatically.
Automatically reconnect
Once Bluetooth is out of the working range, When return to the working area in 5 minutes, It will automatically reconnect
Call function
Answer a call
Short press Play button or phone to answer a call.
End a call
During the call, short press the play button or press the reject button on the phone to hang up the call.
Last number redial
When the headset is connected, double-click the play button to redial the last number.
Reject a call
When call coming, double click the play button to reject the incoming call.
Three-Way Calling
- Click the play button to hang up the current call and connect to the new call; long press the play button ,to reject the new call
- Double-click the play button to switch the current call to the Hold state and connect the new call
- During the three-party call, double-click the play button to switch the call
- During the three-party call, click the play button to hang up the current call and switch to another call
- Click the play button again to hang up the third-party call.
Support two mobile phones pairing
Connect phone A first, and disconnect, then connect phone B, and then re- connect phone A, it will connect two phones at the same time.
Music function
Play mode
Short press the play button to pause music during playback, Short press to pause to play.
“+” button
① Short press volume”+” button, The headphones volume will no longer increase
with “beep” sound.
② When playing music, Press and hold the volume+ button to skip to the next
song.
” – ” button
- Play music status, press tbe volume down button to decrease the volume, and mute when the volume is set to the minimum
- Play music status, press and hold the volume down button to skip to the previous song
Others
Headphone interface
① Plug in the LIN headphone
② Shutdown cannot be used when the headset is dead
Mobile phone battery display
When the headphone is connected to the phone or a device that supports the battery indicator, the current battery level is displayed in the upper right corner of the system.
Tips: If the product is not used for a long t i me, please charge the product once every three months to avoid damage the product
The Bluetooth work mark and logos are owned by Bluetooth SIG, Inc. and any use
of such marks by Shenzhen Eson Technology Co.,Ltd is under license.
Other brands and names are the property of their respective owners.
Design and specifications are subject to change without notice.
