Danfoss ChangeOver6 Motorized 6-Port Ball Valve User Guide
- October 27, 2023
- Danfoss
Table of Contents
ChangeOver6
Operating Guide
Motorized 6-port Ball Valve
User Guide
ChangeOver6 Motorized 6-Port Ball Valve
The 6 ports of the ChangeOver6 valve allow the following flow directions.
| ontrol signal – 0 VAC (brown wire)
Port 1 to port 2 and port 3 to port 4
---|---
| ontrol signal – 24(230) VAC (brown wire)
Port 5 to port 2 and port 3 to port 6
| Heating or cooling distribution pipes
Ports 1, 4, 5 and 6
| erminal unit pipes
Ports 2 and 3
Danfoss A/S
Climate Solutions • danfoss.com • +45 7488 2222
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, online or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material. Danfoss
reserves the right to alter its products without notice. This also applies to
products ordered but not delivered provided that such alterations can be made
without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.
© Danfoss | DCS-SGDPT/SI | 2021.10
/ AQ392653721362en-000101
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>