aiwa AT-X80D True Wireless Earphones User Guide

aiwa AT-X80D True Wireless Earphones User Guide

BT Wireless Guidelines

This Bluetooth device has an approximate range of 10 metres (30).
Please note that physical obstacles or other electronic devices might interfere with its signal.*

Product overview

• A. Charging / Storage Case
• B. Silicone Ear Tips
• C. Touch Sensor
• D. Indicator Light
• E. Wireless Earphones AT-X80D

Product dimensions

Specifications

Product fit

Please choose the most suitable ear p size for opal comfort and performance.

Entering pairing mode

Flip open the charging case to enter Bluetooth pairing mode.

To pair with another device, please disconnect manually on your mobile device

Start pairing

Turn on Bluetooth on your mobile device and connect to “AT-X80D”. Upon successful pairing, the indicator lights will stop flashing alternately between white and blue

Earphones will power down atomically are 5 minutes of minacity (User not physically wearing earphones)

Notes: Le and right-side earbuds are pre-programmed to be connected to each other once taken out of the charging case. If both le and right-side earbuds fail to connect to each other, place earbuds back into charging case and take them out again.

Charging the charging case

Connect the charging cable to the charging port located on the back of the charging case as shown below.

Approximate charging me: 1.5 Hours

• Flashing white lights indicates charging*

Charging the earbuds

Place earbuds into the charging box to charge.
Approximate charging me: 2 Hours

Blue light indicates earbuds are charging 5

Wireless charging

Place the charging case on the wireless charging pad.
Le right alternate flashing indicates charging
Non flashing indicator light indicates full charge
Approximate charging me: 4 Hours

※ Warning: Rechargeable bakeries must be disposed properly. Please contact your local disposal/ recycling center for proper disposal. Do not expose the bakeries to fire.

Basic Operations

Product/ Accessories :

1. Earphones
2. Charging case
3. Silicone ear tips
4. User manual

Troubleshooting

I can’t find “AT-X80D” on my Bluetooth’s device’s list.
Make sure “AT-X80D” and your device are within Bluetooth working distance (10m). Remove the earphones from the charging case, enter pairing mode manually. Re-tempt to pair again.

My earbuds can only answer calls/ only listen to songs.
Re-start the earbuds. (Power down then power up) Turn off mobile device’s Bluetooth and turn it back on. Delete all pairing data within mobile device. Reemit to pair again.

There is no sound coming from my earbuds.
Please check volume level on both earbuds and connected mobile device. Make sure “AT-X80D” and your device are within Bluetooth working distance (10m). Reemit to pair again.

Unstable connection
Make sure “AT-X80D” and your device are within Bluetooth working distance (10m).

Maintenance

Warranty

This warranty does not apply:

Aiwa Electronics Int’l Co., Ltd. Explore more at www.int-aiwa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>