LISKA Smart Bracelet SV-STO1 Instructions
- June 6, 2024
- LISKA
Table of Contents
LISKA Smart Bracelet SV-STO1 Instructions
Compatible OS and requirements
- Android 4.4 and above
- 105 8.5 and above
- Support Bluetooth 4.0 and above
Preparation
Please charge the smart band for 2 — 2.5 hours before turning on the smart band first time. Battery sign will be shown on the screen while charging.
Please charge the smart band once every three months if the smart band is idle.
Connection Instruction
Mobile APP download Method:
- Method 1: Scan the QR code above to download
- Method 2: Search “Wearfit2.0” in Android store or APP store to download and install.
Functionalities
- Time mode: Body temperature, displaying remaining battery, date and time, sleep time, steps (Date and time could not be set on the smart band. Date and time will be synchronized after connecting to the device), press and hold to change the interface.
- Pedometer: Automatically record step on daily basis.
- Calories: Automatically record calories consumption on daily basis.
- Distance: Automatically record walking distance on daily basis.
- Heart rate measurement: measure heart rate hourly, or measure heart rate manually. Press and hold to enter into heart rate measurement interface.
- Blood pressure measurement: measure blood pressure hourly, or measure blood pressure manually. Press and hold to enter into blood pressure measurement interface.
- Blood oxygen measurement: measure blood oxygen hourly, or measure blood oxygen manually. Press and hold to enter into blood oxygen measurement interface.
- Immunity measurement: the current immunity status can be automatically measured on the hour by APP, and the bracelet can be switched to the immunity interface and pressed for a long time. Enter to start the measurement, the measurement is completed automatically back to the corresponding interface.
- Sleep quality information interface: Measure sleep quality automatically daily.
- Smart reminder: Turn on the notification on the APR. Smart band will notify you when there are notifications, incoming calls, and text messages.
- Training mode: Press and hold the training mode interface to enter. Running, Alpinism, and cycling modes are built in. Press and hold to start record exercise time, calories burnt. Press to pause. Press and hold to exit current mode.
- Weather: The real-time weather condition will be synchronised with your device data and shown on the time display interface. The smart band needs to be connected to the APP and the device GPS function needs to turn on .
- More: Timer(Press and hold to enter or exit, press to start or pause), find my phone(press and hold to find, press to stop), press and hold to turn o , back(press and hold to return to time interface), QR code(scan the code to download the APP)
- Others: hand up to wake up screen, sedentary reminder, do not disturb mode, shake to take photo, hourly measurement, WeChat sport, Apple health, match language automatically.
How to charge and depatch the band
- Follow the instruction to depatch the band and charge.
FAQ
Can’t find the smart or can’t establish connection? Android system:
- Please make sure the Bluetooth is turned on, and the Bluetooth sign is not on the smart band (The smart band are connected if there is Bluetooth sign.) Put the smart band and the device side by side, try to search and connect. The connection can be established on Android 4.4 and above.
- Still unable to connect, enter Setting — Application management – Authorization management – Application access authorization, find Wearfit 2.0, allow all the access; enter into Setting again to turn on GPS location service, restart the phone, try to connect again.
IOS system:
Please make sure the Bluetooth is turned on, and the Bluetooth sign is not on
the smart band (The smart band are connected if there is Bluetooth sign.
Please forget the device first). Go to setting — Bluetooth — forgot this
device, after that the APP will be able to detect smart band.
After binding the smart band, it shows not connected or remaining battery is 0%? The smart band and the device is not connected successfully, please bind the devices again.
No data shown on APP?
Pull down to refresh the main page, the data will be synchronized and shown on
the APP. Automatic data synchronization will only be done on the first-time
connection establishment. Afterward, the data will be synchronized
automatically hourly. Besides, turn on the hourly measurement. The APP read
the hourly data (steps, heart rate) from the smart band. There will be not
data if the hourly measurement is off.
Specification
- Screen size: 1.4 inches
- Charging time: 2 – 2.5 hours
- Bluetooth: Bluetooth 4.0
- Wrist band size: 251mm x 18mm x 2.5mm
- Waterproof Level: IP67
- Charging method: Micro USB
- Battery Type: Polymer Battery
- Packing: Smart band+instruction
- Battery capacity: 90 mAh
Remark
- The measurement results of this product are for reference only and are not intended for any medical use or basis. Please follow the doctor’s instructions and must not self -diagnose and treat according to the measurement results.
- The product waterproof rating is IP67, can be used for waterproofing, not for diving and for a long time in the water. In addition, this product does not prevent hot water, because water vapor will affect the ring.
- The company reserves the right to modify the contents of this manual without prior notice . Some functions are different in the corresponding software version, which is normal.
- This product contains a polymer battery. Do not place this product in a high temperature environment for a long time. Do not place this product in an open flame.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>