LENOXX FD1450 GPS Foldable Optical Flow Drone Instruction Manual

GPS FOLDABLE OPTICAL FLOW DRONE
Model: F01450
Batch: PR4209

PLEASE READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

• If you are in Ina-controlled air space, which covers most Australian cities, you must not fly higher than 400 feet (120 meters).
• Do not fly within 5.5 km of an airfield.
• You must not fly closer than 30 meters to vehicles, buildings or people.
• You must only operate this drone in your line of sight in daylight. Do not let It get away from you.
• You must not fly under any populous area, such as beaches, other people’s backyards, heavy Populated parks, or sports ovals where there is a game in progress.

SAFETY INSTRUCTIONS:

1. This product Is not designed to be used by people (including children) on a physical, sensory or mental Impalement, or people without knowledge or experience unless they are supervised or given prior instructions concerning the use of the drone by someone responsible for then safety. Children must be supervised to ensure that they do not play with the drone. This drone is not a toy. It is not to be prayed with by children
2. This product is not a toy but an integral precise instrument- It requires correct assembly and synchronizing to avoid any accidents. The user of the drone
3. needs to operate and cord roll the drone in a safe manner. Incorrect operation of the drone may cause serious injury or even cause damage or loss of property.
4. Pay careful attention to flying the drone safely. Fly the drone away from obstacles. Do not fly the drone in bad weather conditions leg.: windy, stormy, lightning, rain, snow).
5. This drone Is suitable for use by a person who has experience with flying drones and who is aged 14 years old or
6. Avoid moisture or water content from entering the main body of the drone as it may cause the breakdown of the mechanics and electronic parts.
7. Only use the original parts supplied with the drone or from our company for any maintenance or repairs
8. Please correctly assemble the drone as per the instructions shown In the Instruction manual/packing Instructions.
9. Do not use the drOne for any illegal purposes or used beyond the scope Of the law and safety regulations.
10. Inexperienced users of a drone are advised to use It under the guidance of another person who Is experienced with drones.
11. The drone is not designed to carry a payload.
12. When the rotor blades Male drone are rotating at high speed, do not touch or come into contact with them. Keep any objects away from the rotating parts.
13. Keep the drone and its parts away from a direct heat source and avoid exposure to direct sunlight and Nei temperatures.
14. Dun ng the process of synchronizing the control.’ to the drone, ensure there is 1- 2 meters distance between the user and the drone to avoid collision or injury.
15. Our company and its distributors are not responsible for any loss due to Incorrect operation which may cause any loss or damage or injury to the body or damage and loss of property.
16. Small parts are contained in this product. Please keep it out of reach from children to avoid ()JOKING HAZARD.
17. Keep the packaging material away from children
18. Do not play with the drone on the road an in/close to water
19. Do not disassemble or re-equip the drone as it may cause the breakdown of the drone during flight
20. To instill batteries to the controller: remove the battery CM!! (run the rear of the hand controller. Add 4 x AA sued batteries (not included) to the battery compartment of the controller The batteries need to be installed as per the correct polarity. When batteries have been added correctly to the hand controller, add the battery cower.
21. Do not mix old batteries with new batteries
22. Only use the original charge lead to charge the drone The charge lead is not a toy. Keep the charge lead out of reach of children.
23. When charging the rechargeable battery of the drone. please do so under the surveillance of an adult Keel) it away from combustible objects when charging.
24. Do not short circuit. cut open Or squeeze the battery.
25. Do not throw any batteries info a fire. expose to a direct heat source and avoid exposure to direct sunlight and high temperatures
26. Exhausted batteries need lobe removed in a timely manner.
27. Ensure any exhausted batteries are disposed of el a safe manner as per your local authority.
28. Please remove batteries from the controller and the droned I they will not be used for a long time to avoid battery kakis..
29. The drone should be kept far away from other electronic equipment and far away from magnetic objects as they may cause interference with each other.
30. In order to comply with the command of the magnetic environment requirement formulated by the Aviation Radio Bureau and the related authority, donna the regulated period in certain areas, please stop using the controller of this drone when such regulation command is issued.

Know Your drone

1. Camera
2. Motor
3. Propeller blades
4. fuselage top cover
5. fuselage down cover a battery

Items list

Please check the items in the package before you start.

Drone

Description of drone
GPS, follow-me, waypoints, orbit Hying, optical flow positioning and so much more… It’s time to reach new heights and traverse undiscovered terrains with our premium, high-capacity drones. This handy, foldable drone is perfect for packing up and taking on the go to your next destination.

Installing the Propellers

The Drone comes with replaceable propellers if the originals are broken or badly damaged.

1. When installing for the first time, please carefully distinguish the propellers type.
2. Referring to Figure 3, insert the groove of the propeller opener into the bottom of the propeller which needs to be replaced. And press the handle of the opener to take down the propeller.
3. Referring to Figure 4, distinguish between type A and type B propellers, and press the propeller vertically to install them on the motor shaft. The mark can be found on the rotor. It is extremely important to use the correct propeller (A or B) for replacement. Using the incorrect propeller will make the drone out of to control.

Battery Charging Steps

The drone battery is a 7.4V lithium battery, use the factory-configured USB cable to charge.
**** Before flying, ensure the battery is fully charged.

Take the battery out of the rear of the drone

Charging connection

1. Charge via computer
2. Charge via USB adapter

When USB is connected to the computer, the red light flashes slowly, and the battery is plugged in to charge normally. The red light is always on, and the light goes out when the battery is fully charged.

Remote control

Functions Instructions

1. Calibrated Gyro

2. Long press Indoor mode/GPS mode (can not change the mode after drone flies)

3. Switch

4. Accelerator control stick
   4+5 Left stick push to left bottom corner, right stick push to right up corner at the same time, is calibrated geomagnetic.
   4 +5 Push left control sticks to push to left bottom comer, right control sticks push to right bottom corner at the same time, unlock drone.

5. Direction control stick

6. One-key return

7. Long press energetic stop

8. One-key taking off/landing

9. Speed mode

10. Headless mode

11. Camera up and down

12. Short press taking photos/ long press taking photos

Charging the remote control

1. Charge via computer
2. Charge via USB adapter

Red lights blinking mean charging, four lights all illuminated means that charging is complete.

Preparation before flight

Select your flight environment

Preparing Inspection
Please inspect the following items before flying

1. Whether the drone and remote control are both with full battery power
2. Whether the propellers are installed correctly and without any damage
3. Whether the propellers can rotate normally when the product is started
4. Whether Gyro Correction has been successful
5. Whether smartphone connection has been successful
6. Whether GPS positioning is complete
7. Whether the environment is suitable for flying
   Note: Ensure that the drone’s arms are fully open.

APP DOWNLOAD:

Scan the QR codes to download the app.

https://play.google.com/store/apps/detailsid=com.vison.macrochip.gps.pro

|

https://apps.apple.com/us/app/id1478494834

---|---

Alternatively, you can search for the app by searching for VS GPS PRO in the app store or google play store and download it to your smartphone.

WIFI:

1. Once the drone is turned on, access the settings on your smartphone and open the WIFI settings.

2. Find the WIFI network GPS DRONE- XXXXX and connect to that WIFI network. 3.When the connection has been made successfully, exit out of the settings on your smartphone.

3. Put the drone on level ground, turn on the switch of drone, LED flashing fastly;

4. Turn on the switch of the remote control, will auto-match frequency when front lights of the drone remain on, backlights of drone flashing slowly, it means that frequency is successful;

5. Connect the drone with mobile phone wifi and then go to the APP interface.

6. Press the calibration gyro button, the controller will make a sound. Light of the drone flashing from quick to constant, then front light constant, backlights slowly, meaning calibrate gyro successfully;

7. Calibration Geomagnetic: press the left stick of control to the left bottom corner and right stick to right up corner at the same time and then release, lights on the drone will blink slowly.

8. Pick up the drone and rotate the drone horizontally as in picture 1 until the rear light of the drone remains on and the controller make a sound “di”; Then continue to rotate the drone vertically as picture 2 until the front light of the drone remind on and the controller makes a sound “di”, which means calibration was successful.

9. Drone defaults are GPS mode, which will auto search satellite after calibration. This will take some seconds, wait until all lights on the drone are remained on and the controller makes one “di” sound. It means the pairing was successful. On the APP, it will also show GPS has been connected, then it is ready to fly.

10. Push left stick to left bottom corner, right stick to right bottom corner at the same time, unlock the drone and the propeller start spinning, push the throttle stick up or press one-key taking off button, the drone will fly.

Flying indoors or No GPS mode

(Make sure the GPS light is off on for flying indoors)

1. Put the drone on level ground, turn on the switch of drone, LED flashing fastly;
2. Turn on the switch of the remote control, will auto-match frequency when front lights of the drone remind on, backlights of the drone flashing slowly, it means that frequency is successful;
3. Press the calibration gyro button, the controller makes a sound. Light of the drone flashing from fastly to constant, then front light constant, backlights slowly, it means calibrated gyro successful;
4. Press the GPS button on the remote for turning off the GPS function, the GPS light will be off on the remote.
5. Push left stick to left bottom corner, right stick to right bottom corner at the same time, unlock the drone and the propeller start spinning, push the throttle stick up or press one-key taking off button, the drone will fly.

Note ：
Do not turn on indoor mode to search star positioning in the air, the home point will be vertical in mid-air, drone maybe get errors when to home the point. If you want to change into GPS mode after flying outdoor with indoor mode, please make the drone on the level ground, turn off the switch of drone and controller, then turn then on again or long-press indoor/outdoor mode button to GPS mode.

One key take-off/landing
Press the “one-key taking off/landing” button after unlocking the drone, drone will auto rise up to 1.5M height, push throttle sticks up to make it fly; press “one-key landing”, the drone will land ground slowly.

Basic Operation

control lever rearward, the drone descends vertically.
Push left control lever rightward, the drone spins clockwise. Push left control lever leftward, the drone spins anticlockwise.
Push right control lever forward, the drone pitches forward. Pull right control lever rearward, the drone pitches backward.
Push right control lever rightward, the drone rolls rightward. Push right control lever leftward, the drone rolls leftward.

Advanced Flight Function

(Indoor mode, please use it cautiously)
After calibrating the gyro, press”indoor/outdoor mode” on the controller, the controller will beep once, which means GPS is off. Notes:

1. Indoor environment close GPS, the drone can be fly, but easy interference by indoor radio signal. May cause drones to get out of control and hit people and objects in the room. Don’t use this feature at will.
2. Do not turn on indoor mode when the wind is strong outdoors, the drone was easily blown away by the wind.
3. Do not turn on indoor mode to search star positioning in the air, the home point will be vertical in mid-air, drone maybe get errors when to home the point. If you want to change into GPS mode after fly outdoor with indoor mode,pls make the drone on the level ground, turn off the switch of the drone and controller, then turn then on again or long-press the indoor/outdoor mode button to start GPS mode.

Headless mode
press the “Headless mode button to start Headless mode. press again exit this mode

Speed Gear adjustment
One sound means slow speed. two sounds mean high speed

Emergency stop
Press the Emergency Stop for an immediate stop. (This is only been used in dangerous situations.pls use it carefully)

Camera adjustment
The drone camera can be adjusted, rotated to left, lens down adjusts rotated to right lens up adjust.

Stable Hover
After the drone rises, release the lever. the drone will be stable hovering at a certain height. Optical flow position
Optical flow position is a way to keep your drone flying stable, which ensures the drone takes pictures and videos in high quality.

1. The drone comes with 2 cameras.
2. One is the front camera with a full 1080P, the other is a bottom camera with 480P resolution.
3. During the flight, the drone will follow the image from the bottom camera, which makes the drone fly stable in a fixed height and position.

Note:
The floor pattern must be simple (free from shadows and complex textures) for the drone’s camera to recognize the floor and fly stable.

One-Key Return

The Return to Home (RTH) function brings the aircraft back to the Take-Off Point.
This function only can be achieved under GPS mode.
There are 3 types of RTH: Smart RTH/Low-battery RTH/Fail connection RTH

1. Smart Return To Home
   Press the Return to Home Button on your controller or tap on the App of your smartphone, and the transmitter will start beeping. Your drone will return to the TAKE OFF Point. Press the button again to stop the RTH procedure. or alter the left and right joysticks to make the drone land in a safe area.

2. Low-Battery return to home
   Low-Battery RTH is triggered when the Flight Battery level is low, When low battery RTH is activated, the drone ascends or descends automatically at the height altitude of 30 meters, then you can alter the left and right joysticks to make it land in a safe area. The drone returns to the take-off point if the current battery level can only support the drone long enough to descend from the current altitude.

3. Fail connection RETURN-TO-HOME (RTH)
   The drone will enter Return to Home Mode if the signal to the controller is lost. The drone will return to the take-off point. The drone may link the remote control automatically during the RTH activation. If links are successful, you can re-operate the drone.

WARNING:
This drone is NOT equipped with obstacle avoidance.

Flight safety
Before flying the drone make sure that you are in a safe setting. CASA restrictions regarding flying drones require the drone to be no closer than 5.5kms from any airport or airfield while flying. Drones should also not be flown higher than 120 meters above the ground, in overpopulated areas or any closer than 30 meters from vehicles, people or animals.
It is also required that you check your surroundings before taking off making sure there are no obstacles or dangers in the area including overhead power lines and bodies of water. If there are hazards present in your intended area of flight, please consider an alternative location. For safety, Default control of drones is set to beginners where the flight parameters are fixed. To change the parameters, please deselect the beginner mode in App’s flight settings.

APP Functions

1. APP Introduction
   Wait until the drone Status says “Ready to Fly” before initiating flight.
   This will ensure that your GPS is synced and your drone is ready to fly.

WAYPOINT FLIGHT (GPS MODE ENABLED)
— Make sure the mobile is internet-connected, enter in the APP, catch the map data of the area when you intend to fly in your mobile device, then connect your mobile device with your aircraft, you can view the map from in the APP.
— Successfully connect the drone WIFI with your smart phone, click on the App, then you can find a RED CIRCLE(LIMITED FLIGHT RANGE)/TAKE- OFF POSITION/AIRCRAFT CURRENT POSITION on the map, mark the points (16 points at most) you plan to fly within the RED CIRCLE range on the map. If you would like to reset the points or flight route, click **Delete single** or **Delete all**. Click **Send**, confirm to start Way Point Flight. Push the Right Joystick to cancel the Way Point Flight Function.

GPS FOLLOW-ME

When the Follow Me function is activated, the aircraft will follow the GPS in your smartphone to follow you wherever you go.
(Make sure the smartphone is connected with the aircraft successfully, turn on APP on your smartphone.)

1. Make sure the flight scope is within 10-100 meters.
2. Click on the APP interface.
3. Wait for APP aircraft Status to display “Follow Me ready” —Now the drone is moving along with the positioning coordinate on the APP.
4. Click on the APP interface again to exit the Follow Me mode.
   Common issues:
   GPS Follow-me function will be affected by the tall structures, trees, and the living areas with WIFI signal interference.
   GPS Follow-me function is not activated if the GPS signal is weak or GPS positioning is OFF in the mobile device.

• Use in an open area and be mindful of your surroundings. This drone is NOT equipped with obstacle avoidance.

Hand gesture
Click on the APP, count down 3 seconds to 0 seconds with the hand motion to take photos or record the video, please follow the tips from the (PIC.1).

Point of interest

1. Hovering the aircraft around the center point.
2. Click on the APP, the drone will fly around the center point.
3. Click again on the APP to cancel the point of interest mode.

How to search for the lost drone

1. Continue to click Find Drone > to open the MAP surface to search the aircraft.
2.  The last position of lost aircraft will appear on the MAP.

Photo mode
Press the photo button once on the remote control or click the photo icon on the App.
A picture will be shown on the App, meaning a photo has been captured.
If not connected with app, please press the top left button on the controller to take a picture.

Video mode
Press the photo button for 3 seconds on the remote control or click the video icon on the App.
The video recording time will be shown on your App, meaning a video is being recorded. If not connected with app, please press the top right button on the controller for 3 seconds to take a video. Then press the top right button for 3 seconds again to exit the video mode.

Maintenance

1. Use a soft clean cloth to clean the drone.
2.  Do not put the drone or it’s parts into water.
3.  Please check the parts and accessories of the drone at regular intervals. If there is any damage, do not use the drone until repairs/maintenance are carried out.
4. Avoid exposure or heating to the drone and its parts and accessories.

www.lenoxx.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>