3P Experts M3 Fashion Tech Smart Watch User Manual

3P Experts M3 Fashion Tech Smart Watch User Manual

Notice for Use

1. Smartwatch can detect real-time and dynamic heart rate and blood pressure, but it can’t be used for any medical function;
2. Charging: please charge the smartwatch before use and ensure that it’s fully charged. Please confirm that 2 vibrating needles of magnetic-type charger align with 2 charging contacts of host or insert charging clip to USB adapter (adapter 5V 500mA). Please ensure that there is no dirt, oxidization and impurities on metal contacts. There will be charging icon on the screen of smartwatch while being charged. If not using the smartwatch for a long time, please charge it every three months.
3. Please do not charge with power adapter with output current exceeding 2A; otherwise, the smartwatch will ba damaged.
4. Please do not shower the smartwatch with hot water or put the smartwatch under high temperature; otherwise, it will damage water-proof performance of the Suneratech.
5. Please do not charge under the condition of humidity or being stained with water..

Operation Diagram

1. Smartwatch
   

2. Packing list
   a. Smartwatch1
   b. Packing box1 c. User manual d. Charging base*1 Note: the product supports full-screen touch operation and operation is shown as above diagram; Key + watch body a. long press for ON/OFF; b. short press to extinguish/awaken screen

APP Installation & Bluetooth Connection

Please search “FitCloudPro” in Myapp and Google Play on Android mobile or APP Store on iPhone; or scan below OR code to download and install App

Note: Android supports 4.4 and above; IOS supports 8.0 and above; Bluetooth hardware 4.0 and above. Bind smartwatch. Click selection of binding device and Find out the device to be connected. If there are several devices nearby, select MAC address of own smartwatch to bind. If the smartwatch binds with mobile successfully, there will be Bluetooth icon on top of smartwatch.

Product Parameters

Bottom case:IML Bluetooth: BLE 5.0 Main control chip: RTK8752CK Screen size: 1.1 inches, TFT colour screen Battey capacity: 160 mAh Battery type: polymer lithium battery Standby time: 10-15 days Waterproof level: IP68 Charging way: magnetic charging base Waxing temperature: 0-40r Compatibility Above IOS 8.0 Android 4.4 and above Apply to most mobiles on market

Function Introductions

1. Switch main interface
   

2. On main interface, long press touch key to switch main interface 2.S ports information Display daily steps, mileage and calorie consumption

3. Heartrate Slide to enter heartrate interface, start to measure and display heartrate data

4. Blood oxygen Slide to enter blood oxygen interface, start t o measure and display blood oxygen data

5. Blood pressure Slide to enter blood pressure interface, start to measure and display blood pressure data.

Function Introductions

2D.Drop-down menu Slide down main interface to select `brightness”, “settings” and other functions
21.Raise wrist to brighten Cick raise wrist to brighten to set this function

22.Vibration strength Click to enter vibration strength to adjust vibration strength

23.Brightening time Click to enter brightening time to set this functiion

24.Fema le Click to enter female function to view current menstrual cycle (Note: after smartwatch connects with APP, all parameters of menstrual cycle can be set in APP such as menstruation, pregnancy

preparation, gestational week, expected date of confinement, etc.)

Precautions

1. Why the smartwatch should be worn tightly while testing hear rerate?
   By adopting light reflex principle, the smartwatch penetrates skin through light source and the signals reflected on sensor are collected to calculate heartrate. If it’s not worn tightly, ambient light will enter the senor and it will influence measurement accuracy.

2. .It’s not suggested to wear while taking a hot bath: First factor: vapor produced while taking not bath Due to high temper able of bath water, it’s easy to produce many vapors. The vapors are gas with small molecular radius, so they will penetrate easily through the gap on shell of smartwatch. After the temperature falls, it will gradually c congeal to water drop, which will bring harm to circuit board and then damage the smartwatch. Second factor: temperature When electronic products are influenced by high temperate, bw temperature, cyclic change of high temperate and low temperature, there will be parameter varia ons of internal components and parts, which will directly influence normal operation and even damage the smartwatch. Please pay attention to these while using in daily life.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>