V-TAC Robot Vacuum Cleaner VT-5555 Instruction Manual

: June 6, 2024
: V TAC

V-TAC Robot Vacuum Cleaner VT-5555

robot vacuum cleaner

INSTRUCTION MANUAL ROBOT VACUUM CLEANER (VT-5555)

INTRODUCTION

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best.

Safety Regulations

Before using this product, please read the following safety instructions and follow all routine safety precautions.
Please read the instructions carefully, please keep the instructions.Any operation inconsistent with this instruction manual may cause damage to this product.

Note:

Only authorized technicians can disassemble this product. Users are not recommended to disassemble this product by themselves.
This product can only use the power adapter provided by the factory. If other adapters are used, the product maybe damaged.
Do not touch wires, sockets or power adapters when your hands are wet.
Do not use cloth curtains or body parts to roll into the product drive wheels.
Do not place this product near cigarette butts, lighters and other smoldering fires. Please clean the product after charging.
Do not bend wires excessively or place heavy objects and sharp objects on the machine.
This product is an indoor household product. Do not use it outdoors.
Do not sit on the product.
Do not use this product (e.g. bathroom) in wet environment.
Before using this product, please remove all vulnerable items (e.g. glasses, lamps, etc.) on the ground as well as items (e.g. wires, pa per sheets, curtains) that may entangle the side brushes and air suction passages.
Do not put this product in a place where it is easy to fall (e.g. on desks and chairs). Please carefully check whether the power adapter is connected to the socket before use, otherwise the battery may be damaged.
To prevent tripping, please inform other members of the house when this product works.
Please empty the dust box before using this product when the dust box is full.
The temperature used for this product is 0 to 40 degrees Celsius.
Do not use this product in high-temperature environment.
Please remove the battery from the machine before the product is crapped.
Please make sure that this product is not powered on when removing the battery. Please recycle the discarded batteries safely.

Warning:

Use only the original rechargeable battery and charging seat specially equipped by the manufacturer. Non – rechargeable batteries are strictly prohibited, please refer to” product parameters” for battery specification information.
It is forbidden to use products in environments with open flames or fragile objects.
It is forbidden to use products in extremely hot (above 40 ℃) or extremely cold (below 0 ℃).
It is forbidden for human hair, clothes, fingers and other parts to approach the opening and operating parts of the product.
It is forbidden to use products on wet or stagnant ground.
It is forbidden for products to absorb any articles such as stones and waste paper that may clog products.
It is forbidden for products to absorb any inflammable substances, such as petrol, toner and toner for printers or photocopies. Prohibit the use of products in clean areas with flammable items.
It is forbidden for products to absorb any burning articles, such as cigarettes, matches, ashes and other articles that may cause fire.
It is forbidden to place articles at the suction opening. Do not use the product when the suction port is blocked .Clean up dust, cotton wool, hair, etc. at the suction opening to ensure smooth air circulation at the suction opening.
Use the power cord carefully to avoid damage. It is forbidden to use the power cord to drag or pull the product and the product charging seat. It is forbidden to use the power cord as a handle. It is forbidden to clamp the power cord in the crack of the door.lt is forbidden to pull the power cord at sharp corners and corners.lt is forbidden for the product to run on the power cord while the power cord should be far away from the heat source.
Do not use damaged charging seat. Even if the product has been severely damaged, burning of the product is prohibited, which may lead to explosion of the battery of the product.

Package Contents

V-TAC Robot Vacuum Cleaner VT-5555 2

Product Composition / Part Name

Front Robot

V-TAC Robot Vacuum Cleaner VT-5555 3

Back Robot

V-TAC Robot Vacuum Cleaner VT-5555 4

Product Composition / Part Name

Dust box

V-TAC Robot Vacuum Cleaner VT-5555 5

Water Tank and Mopping Pad

V-TAC Robot Vacuum Cleaner VT-5555 6

Charging Dock

V-TAC Robot Vacuum Cleaner VT-5555 7

Remote Control

V-TAC Robot Vacuum Cleaner VT-5555 8

Product Usage – Preparation

Remove Protection
Before using the Robot, remove the protective strip on the Robot.

Remove the protective strip

V-TAC Robot Vacuum Cleaner VT-5555 9

Charging The Product

Placing and charging: The charging seat is placed against the wall and is to beplaced on a flat ground. Do not place articles within the range of 0.5m left and right and 1.5m ahead.

V-TAC Robot Vacuum Cleaner VT-5555 10

Power Supply: Connect the power adapter to the DC plug. Installing side brush: Install the side brush according to the left and right (L/R).

V-TAC Robot Vacuum Cleaner VT-5555 11

Charging: Place the Robot on the charging seat to charge (during charging, the indicator light flashes and once complete the light is constant. The charging time is about 5 hours.)

V-TAC Robot Vacuum Cleaner VT-5555 12

During the cleaning process, the host can sense that its power is insufficient and automatically start the recharging mode, it automatically find the charging dock to charge. You can also command the device to start the recharging mode by tapping on back charging key of the remote controller.

Charging attention:

The charging seat cannot be used in environments with strong reflection such as direct sunlight and nearby mirrors. If there is any object with strong reflection, please cover it 7 cm from the bottom.
In order to ensure the normal working hours of the host computer, please fully charge it before use. The charging time is about 5 hours.
When charging, do not start the water tank assembly, so as to ensure the safety of charging and prevent wet rags from damaging the floor.

Cleaning The Product

According to different cleaning needs, this product has a variety of cleaning mode to choose from. You can start various cleaning mode through Robot, remote control or V-TAC Smart Light App.
Auto Cleaning:
Applicable scenario: The most commonly used cleaning method is that the main engine uses a bow-shaped path to plan and clean the whole house according to the actual home environment.
Setting method: In the shutdown state, press the key for longtime, when the indicator light of the host is on, it indicates that the Robot is powered on. When the key is pressed for a short time, or press the automatic cleaning bottom ) on the remote control, the Robot starts automatic cleaning.

For the Robot to start super sunction mode, Press the button one more time again.

V-TAC Robot Vacuum Cleaner VT-5555 13

Single Room Cleaning:
Applicable scenario: Cleaning single room
Setting method: Click the remote control mode switch button to select the single room cleaning mode to start the single room cleaning. Warm Tip: When it is only necessary to clean a single room, please close the door and the host will do centralized cleaning in the room If this room does not have a charging seat, the device will return to the original point.
Single room cleaning mode is always the super sunction cleaning mode.
Edge Cleaning:
Applicable scenario: For indoor corner cleaning, the Robot cleans along the perimeter of fixed objects ( such as walls), and returns to the charging seat after the edge cleaning is finished.

Setting method: Click the remote control mode switch button select the Edge cleaning mode to start the edge cleaning.
Manual Control:
Applicable scenario: Suitable for manual control cleaning.

Functions – Pause, Wakeup & shutdown

Pause: During the operation of the Robot, press the pause key or the remote control pause key to pause the operation of the Robot. Awaken: If the Robot stops working for more than ten minutes, it will automatically enter sleep mode (The Robot lights will turn off).You can wake up the Robot by clicking the Start/Pause Key(Robot key) on the device, then click the Robot key or any key of the remote controller and app to restart Shutdown: After the Robot stops working, press the Start/Pause Key(Robot key) for a long time, and the indicator light of the Robot machine goes switches off to indicate that the machine has been shut down.

Function – Time Scheduling Setting

Scheduling： Press the remote control button to set the Robot time scheduling. Press the button ,then press the key to set the Scheduling time, once done press the button again to complete the settings. The Robot will automatically clean up at the scheduled time.
PS Before the time scheduling setting, you need to use the button to set the clock of the Robot first. Press the button then press the key to set the time of Robot, when you have selected the time then done press ,then the setting is completed.

Using The Water Tank

*Do not use the floor mopping function on carpets.
Note: After mopping the floor, please empty the water tank and remove the mopping pad.

V-TAC Robot Vacuum Cleaner VT-5555 14

Maintenance – Dust Box

V-TAC Robot Vacuum Cleaner VT-5555 15

V-TAC Robot Vacuum Cleaner VT-5555 16

H． Dry the dust box and assemble the filter, and keep it dry to ensure its service life.

V-TAC Robot Vacuum Cleaner VT-5555 17
I. Replace the primary filter screen and the high efficiency filter screen into the dust box;

1. Before installing the filter screen, please ensure that the high efficiency filter screen and the primary filter screen
are in a dry state.
2. Do not expose the high efficiency strainer and primary strainer to the sun.
Note: It is recommended to wash the primary strainer with water 15 – 30 days after it is used. The maximum service life of the high-efficiency filter screen is 3 months Maintenance – Dust Box
J. Cover the dust box cover and install the dust box on the Robot

Note: Do not allow water to seep into the fan port when cleaning.

Maintenance – Water Tank & Mopping Pad

V-TAC Robot Vacuum Cleaner VT-5555 18

Maintenance – Main Brush & Side Brush

V-TAC Robot Vacuum Cleaner VT-5555 19

Maintenance – Charging dock pins, Down view sensor, Drive & universal

wheel

Warm Tip: The interior of the charging pole piece, the down-view sensor and the striking plate all contain sensitive electronic components, please use dry dishcloth when cleaning, and do not use wet dishcloth to prevent damage caused by water inflow.

Clean up charging dock pins

V-TAC Robot Vacuum Cleaner VT-5555 20

Clean the down-view sensor

V-TAC Robot Vacuum Cleaner VT-5555 21

Clean drive wheels and universal wheel

V-TAC Robot Vacuum Cleaner VT-5555 22

If you do not use the product for a longtime, please fully charge it before storing. Turn off the host and charge the device every 3 months to prevent the battery from over-discharge.
If the battery is over-discharged or is not used for a long time, the product may not charg. Please contact our company for after-sales maintenance, do not disassemble it yourself.

Troubleshooting

No.	Prompt Tone	Cause of Failure	Solution
1

Wheels off the ground

|

Robot suspended

| Please put the Robot back to the ground and press the cleaning button again.
2|

Dust box not installed

|

Dust box removed and not installed

| Install the dust box to the Robot and press the cleaning key again.
3|

Battery failure

|

Abnormal battery charging

|

Contact after-sales test battery

4|

Please check if the wheel is stuck

|

Wheel jammed

| Check whether the wheel is entangled with foreign objects and clean up the entangled objects.
5| Please check if the front collision is stuck|

Front impact bracket stuck

|

Check whether the front collision can rebound normally

6|

Robot connection failed

|

The machine failed to connect to server

| Check whether the wireless network connection during distribution can connect to the internet
7| The battery is low, please charge the machine|

Battery power less than 20 %

|

The machine automatically enters the recharge mode

8| Please check whether the side brush is tangled or jammed|

Abnormal edge brushing

| Check whether the side brush is entangled by wire and fix the wire.

9

| Please move the machine to an open area.| The machine failed to get out| Please move the Robot to an empty place and press the cleaning button again.

Technical Specifications

Classification	Projects	Parameter

Structural class

| Diameter| 330 mm
Height| 76mm
Net weight| 2.7 kg

Battery

| Voltage| 14.4 volts
Battery| 2500 mah rechargeable lithium battery pack

Parameter

Robot

| Rated power (w)| 28
Operating voltage ( v )| 14.4

APP INSTALLATION INSTRUCTIONS

Step 1: Turn the power button ON of the device.
Step 2: Scan the given QR code, or download “V-TAC Smart Light’ from the App Store (iOS) or the Google Play Store (Android). Step 3: Open the V-TAC Smart Light app and tap on register for creating a new account. If you already have an existing account, please proceed to logging in [Fig 1].

V-TAC Robot Vacuum Cleaner VT-5555 23

Step 4:

Mobile Number: Select the country, then enter your mobile number. Once done, tap ‘Next’ [Fig 2].
E-Mail: Enter your email id and tap on ‘Next’ [Fig 2].

Step 5: Enter the verification code which will be sent to your mobile number/emai id, then assign a new password to your account and tap on “Confirm” to complete the registration process [Fig 3]. Once done you will be redirected to V-TAC Smart Light Home page.

Step 6: Tap on ‘Add Device’ or the + sign. Make sure the device is switched on [Fig 4]. V-TAC Robot Vacuum Cleaner VT-5555
24

Step 7: To select the device, tap on Home appliances, and then choose ‘Robot Vaccum’ to start Pairing process of the device to the app [Fig 5].

Step 8: Pairing Process

Turn On the vacuum cleaner by tapping on the power button
Tap on the power button two times continuously to switch ON the WiFi mode for

Note: If you are facing issue with pairing please tap on Help as shown below to see further instructions [Fig 6].

Confirm if the light blinks rapidly, Enter wifi password and click “Confirm” [Fig 6 & 7]. V-TAC Robot Vacuum Cleaner VT-5555 25

Step 9: Once you have successfully completed step 8, you will be redirected to “Connecting Now” page, where the App searches, registers and initializes the device

[Fig 8]. Once it is completed your device will be successfully paired.

Step10: Once your device is successfully paired, rename the device to your preference. And then tap on completed [Fig 9].

Step11: You can now start controlling your device with the App. Tap the device name on the home page to enter the controls and features of the device [Fig 10].

V-TAC Robot Vacuum Cleaner VT-5555 26

Step 12: Modes And Features

APP Operation

To choose the preferred cleaning mode you may tap on any of the options preferred (Recharge Mode, Room Cleaning, Spot cleaning, Edge Cleaning) [Fig 11]. To choose cleaning strength mode tap on Cleaning strength [Fig 11] and select the desired cleaning mode setting which you wish to set for the device [Fig 12].

Scheduling

Tap on schedule setting [Fig 11] to enter the scheduling interface and choose “Add Schedule” [Fig 13] and choose preferred working time and day [Fig 14 & 15].

V-TAC Robot Vacuum Cleaner VT-5555 27

Start / Pause / Standby / Sleeping mode

Press “ ” / “ ” to start / pause the robot [Fig 16];

Note: When the robot pauses over 10 minutes, it will enter sleeping mode;

If it is in sleeping mode, press “ ” , the robot will be wakened up to standby mode; To start the vacuum cleaner press the preferred cleaning mode.

Working Map and Cleaning Record

The App will show the map of working cleaning path of the robot [Fig 17]; But it may not update in real time;

Tap “Cleaning record”, it will show the cleaning records of working time and cleaned area, also you can clear the data [Fig 18].

V-TAC Robot Vacuum Cleaner VT-5555 28 Find robot

You may not know where the robot is when it finishes cleaning and stops. Tap on “Positioning ” [Fig 19]; The device will prompt with a sound “Ding Dong” for you to find the Robot vacuum cleaner.

V-TAC Robot Vacuum Cleaner VT-5555 29 Mute

Tap “More” to enter mute function setting interface [Fig 20]; If mute function is active, the robot will cancel voice prompt [Fig 21].

Supported Third-party Control

The robot works with Amazon Alexa, Google Assistant, and some other third- party-controlled devices.Tap on the top right corner [Fig 22], then find “Supported Third-party Control” and tap the corresponding icon to learn the connection way [Fig 23].

Share Devices

Only one main ID for one single device is available. If you want to share the device to others in your family, tap on the top right corner; Choose “Share devices” [Fig 24]; type correct registered cellphone number/ email ID to add additional users [Fig 25].

Note: Other users have to register V-TAC Smart Light ID before they can be added.

Reset WIFI

Changing the connection from the existing WIFI network to new WIFI network, you need to re-connect your robot to the new WIFI network after initializing your robot as follows: turn on the robot, after the voice prompts “Welcome to use sweeping robot”, press the start button twice continuously, then the voice prompts “Connecting network”, and WIFI icon begins to flash constantly, your robot can now be paired to the V-TAC Smart Light App again.