niceboy HIVE2-JOY-2021 Hive2 Joy Bluetooth Headphones User Manual

: June 6, 2024
: niceboy

Table of Contents

PACKAGE CONTENTS
PRODUCT DESCRIPTION
POWERING ON THE HEADPHONES AND CONNECTING TO BLUETOOTH
POWERING OFF THE HEADPHONES
MUSIC CONTROLS
TELEPHONE CONVERSATIONS
SIRI AND GOOGLE NOW
CHARGING AND BATTERY INFORMATION
SAFETY INFORMATION
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

niceboy HIVE2-JOY-2021 Hive2 Joy Bluetooth Headphones User Manual

PACKAGE CONTENTS

Wireless headphones
Charging micro USB cable
Audio cable jack 3.5 mm -> micro USB Directions for use

PRODUCT DESCRIPTION

Increase volume/Next track
Decrease volume/Last track
Multifunctional button (LED indicator)
Charging micro USB port / AUX input
Microphone

POWERING ON THE HEADPHONES AND CONNECTING TO BLUETOOTH

Press and hold the multifunctional button until the LED indicator within the button starts to flash blue-red and the audio signal has sounded. The headphones can now in their pairing mode.
Activate Bluetooth on your device and select “Niceboy HIVE 2 joy” from the list of available devices. Your device will connect to the headphones. Once the pairing is successful, it will be announced by an audible queue and the LED indicator will begin to slowly flash blue.

Note
The headphones automatically connect to the device they were last connected to.
For the purpose of saving the battery, the headphones automatically power off after 3 minutes after having last connection to your device of if they are not connected to any device.

POWERING OFF THE HEADPHONES

To power off the headphones, press and hold the multifunctional button until the audio signal sounds, and the LED indicator begins to shine red.

MUSIC CONTROLS

Playback/pause: short press the multifunctional button. (3)
Next track: long press the “+” button. (1)
Last track: long press the “-” button. (2)
Decrease volume: short press the “+” button. (1)
Increase volume: short press the “-” button. (2)

TELEPHONE CONVERSATIONS

To accept or end phone calls, short press the multifunctional button. Press the multifunctional button for about 3 seconds to reject an incoming call.
Note: Some phones have calls preferentially set to their own microphone and headphones. In such a case, change the selection according to the instructions on your mobile phone.

SIRI AND GOOGLE NOW

Activate in the emergency mode or when playing music by pressing the multifunctional button twice.

CHARGING AND BATTERY INFORMATION

We recommend fully charging the battery before the headphones’ first use. Use the enclosed micro USB cable to charge the headphones. The charging voltage and electrical current is 5V/1A.
Charge the headphones if the LED indicator starts to shine red. An audio signal will alert you when only several minutes of use remain. A complete charge of the battery takes approx. 1.5 hours.

SAFETY INFORMATION

Listing to music on above-average volume can damage your hearing. Do not expose the headphones to liquids or moisture. Do not expose the headphones to too high/low temperatures and do not attempt to take the headphones apart. Keep the headphones away from sharp objects and falls from high places.

SPECIFICATIONS

Bluetooth version: 5.0
Supported Bluetooth profiles: A2DP, AVRCP,HFP
Frequency: 20Hz – 20kHz
Sensitivity: 103+/-3dB
Playback period: up to 30 hours (on 70% volume)
Conversation period: up to 30 hours
Range: up to 10 m
Battery: 300mAh
Speaker: 40mm
Charging period: 2 hours