aiwa RS-X60 Diviner Ace Wireless Speaker User Manual
- June 6, 2024
- Aiwa
Table of Contents
Japan l9S1
RS-X 6O Diviner
User Manual
I developed in. Japan
Alwa Eloctronlcs lets Co, Ud.
Important Safety Instructions
- Please do not place the device near any form of heat source.
- Please use the accessories specified by the manufacturer.
- Please refer all servicing/repairs to qualified personnel should there be any form of damage to the device.
- Keep this user manual for future reference/troubleshooting.
- Please heed ALL safety cautions.
Safety Cautions
- Always keep the device AWAY from fire and heat sources.
- Do NOT attempt to disassemble or alter the device.
- Do NOT expose the device to excessive heat (Direct sunlight etc.).
- Do NOT immerse the device into any form of liquids
Unboxing
– RS-X60 Diviner Speaker
– Charging Adaptor
– Remote Control
Please refrain from using any damaged components. Contact your local
authorized AIWA distributor/customer service should you need any assistance.
Product Specifications
Model Number: RS-X50 Diviner
BT Version: VS0
Power Output: SOW
Impedance: 4t) Frequency
Response: 60Hz – 23KHz
S/N Ratio: t 80dB
Sensitivity: 400MV
Supports: BEAUX, TF Card, USB,TWS
Supported Profiles: m23, WMA, WAV, FIAC
Transmission Distance (Estimated): 10 Meters (No Obstacles)
DC Input Voltage/Current 9V DC,1A/2A
Battery. 7.4V/ 6000mAH
Playback Time: 4 – 5
Hours Charging Time: 4 – 5
Hours Dimensions: 260150160mm
Weight: 3.1Kg
The above playback & charging times are estimated values tested in a practical
environment and may vary upon individual usage habits.
Product Overview
- USB Port
- Master Volume Knob
- Bass Adjustment Knob
- Treble Adjustment Knob
- Charging Indicator Light (Red while Charging, Green when Full Battery)
- Power ON/OFF
- AUX-In
- BT/Aux Indicator Light
- Source Button
- Play/Pause Button Charging Port 9V
- I mute
- StandyBy Mode
- 0-9 Number Keys
- EQ: Cycle between Sound Profiles: Classic/ Pock & Roll/Jazz.
- Mode: Cycle between Audio Modes: BT/USE/AUX
- Volume
- Previous Track
- Play/Pause
- Next Track
- Volume-
- BT Mode
- USB Mode
- AUX Mode
- TVVS Connection Button
Playback Sources
USB Playback : Insert USB into the designated port playback will commence
upon pressing the play/pause button.
AUX Playback: Disconnect all BT devices before inserting the AUX cable and
connect It to the audio source to start.
Connecting the Product
1. Turn on Bluetooth (BT) on your mobile device.
2. Turn on the speaker
. 3. Search and connect to “RS-XSO Diviner’ from your mobile device.
4. Press and hold the Play/Pause button for 3-4 seconds to disconnect_
TINS Function
1. Turn on both speakers only compatible with the same model.
2. Press TWS Button and both units will pair to each other automatically within Thirty (30) seconds.
3. Be sure to pair speakers to mobile devices via BT to commence playback.
TVVS also works via AUX and USB
Battery & Charging
Charging the speaker.
Connect charging adaptor to the speaker and a suitable power source
Approximate charging time: 4-5Hours Please fully charge up the speaker prior
to first-time usage.
Troubleshooting
Unable to connect to device:
1. Please ensure the speaker is not connected to other devices
2. Please ensure the speaker is within 10m of the device.
No sound is coming out of the speaker
1. Please ensure your device is connected to the speaker.
2. Please ensure the music volume is at an audible level on both your mobile
device and speaker.
Japan est1951
Aiwa Electronics Intl Co., Ltd.
explore more at wwwint-aiwa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>