resideo 33-00382EFS Cable Sensor for Wi-Fi Water Leak and Freeze Detector Instruction Manual
- June 6, 2024
- resideo
Table of Contents
resideo 33-00382EFS Cable Sensor for Wi-Fi Water Leak and Freeze Detector
APPLICATION
The optional CHWES4 and RCHWES4 cable sensors for the Wi-Fi Water Leak and Freeze Detector extend the sensing range of the detector. Multiple cable sensors can be connected to each other, up to 500 feet in length.
INSTALLATION
Installing Additional Cable Sensors
-
Insert the plug from the accessory cable sensor into the jack on the water leak detector, as shown in Fig. 1.
-
For additional cable sensors, plug each new accessory sensor into the end of the previous accessory sensor, then plug in the original cable sensor at the end of the cable.
The detector and cable sensors are all reusable. After an alarm, simply wipe
dry the detector and cable sensors and put them back in place.
For detector and cable sensor operation, refer to the Honeywell Home app and
the literature that came with the detector.
Need help?
Web: www.resideo.com
Phone: 1-800-633-3991
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
1-800-633-3991
33-00382EFS—05 M.S. Rev. 05-20 | Printed in United States
© 2020 Resideo Technologies, Inc. All rights reserved.
This product is manufactured by Resideo Technologies, Inc. and its affiliates.