iRobot Roomba i Series Robot Vacuum Cleaner Owner’s Manual

Roomba
Clean Base™ Automatic Dirt Disposal
Owner’s Guide

For Roomba ®i Series Robot Vacuums

Care and Maintenance

Care and Maintenance Instructions
To keep your dirt disposal running at peak performance, follow these are procedures:

–

| Bags should be replaced when prompted by the LED indicator/app
Charging Contacts
IR Window| Once every month|

–

Blower Cover
inside canister| Once every month (remove
debris from blower cover)|

–

Note: iRobot manufactures various replacement parts and assemblies. If you think you need a replacement part, please contact iRobot Customer Care for more information.

Replacing the Bag

1. Lift up on the canister lid to open.

2. Pull up on the plastic card to remove the bag from the canister.
   **Note:** This will seal the bag so dust and debris cannot escape.

3. Discard the used bag.

4. Install a new bag, sliding the plastic card into the guide rails.

5. Press down on the lid making sure it is completely closed.

Note: To achieve optimal performance with your robot and automatic dirt disposal, clean and/or replace your robot’s filter as needed.

Cleaning the IR Window and Charging Contacts

Inspect the sensors and charging contacts to make sure they are clear of debris. Wipe with a clean, dry cloth.
Note: Do not spray cleaning solution directly onto sensors or into sensor openings.

Removing Debris from Blower Cover

Inspect blower cover for any lint or debris built-up, and wipe with a clean dry cloth to remove.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>