HYPERX 4402231 Cloud Mix Earbuds Gaming Headphones with Mic User Guide
- June 6, 2024
- HYPERX
Table of Contents
HyperX Cloud MIX Buds
Quick Start Gide
Overview
A Charging contacts
B Touch sensor
C Microphones
D Charging case
E Charging case status LED| F USB-C port
G Charging case button
H Low latency USB adapter
I USB adapter status LED
J USB adapter button| K Extension adapter
L Silicone case
M Ear tips (large, small)
N USB-C to USB-A cable
---|---|---
Powering on and off the Earbuds
CHARGING CASE STATUS LED | EARBUD BATTERY LEVEL |
---|---|
Green | 51% – 100% |
Yellow | 16% – 50% |
Red | < 15% |
To power on the earbuds, open the charging case. The charging case status LED will show the battery level of the earbuds. To power off the earbuds, return them to the charging case and close the lid. The case LED will turn off.
Pairing the Earbuds
- With the earbuds inserted, open the lid of the charging case.
- Press and hold the charging case button for 3 seconds. The charging case status LED will begin flashing blue.
On your Bluetooth® enabled device, search for and connect to HyperX Cloud MIX Buds. Once connected, the charging case status LED will turn solid blue and fade off, returning to the battery level indication.
Connecting the Low Latency USB Adapter
- Connect the low latency USB adapter to your mobile device, PC, or video game console. The USB adapter status LED will begin flashing white. When not being used with a mobile device, it is recommended that the included extension adapter and USB-C to USB-A cables be used.
- When the earbuds are powered on, they will automatically connect to the dongle, and the dongle status LED will breathe white.
Using the Touch Controls
The following media controls are available when using Bluetooth® or the low latency USB adapter:
1 PRESS | 2 PRESSES | 3 PRESSES | LONG PRESS |
---|---|---|---|
Play/Pause | Skip Track | Previous Track | Mute/Unmute Microphones |
The following phone controls are available when using Bluetooth®:
STATUS | 1 PRESS | 2 PRESSES | 3 PRESSES | LONG PRESS |
---|---|---|---|---|
Receiving Call | Answer Call | Reject Call | X | X |
In Call | X | End Call | X | Mute/Unmute Microphones |
Note: Touch control functionality can vary between devices and apps
Muting the Microphones When Using the Low Latency USB Adapter
Press the USB adapter button to mute/unmute the low latency USB adapter’s
microphone audio. The USB adapter status LED will breathe red when the
microphone audio is muted.
Checking the Charging Case
Battery Level
Press the charging case button to check the charging case’s battery level,
indicated by a blink and hold of the case’s status LED.
CHARGING CASE STATUS LED | CHARGING CASE BATTERY LEVEL |
---|---|
Green | 51% – 100% |
Yellow | 16% – 50% |
Red | < 15% |
Charging
It is recommended that the charging case and earbuds be fully charged before
first use.
When charging, the charging case status LED will indicate the battery level of
the earbuds. If neither earbud is in the charging case, the case status LED
will indicate the battery level of the charging case.
CHARGING CASE STATUS LED | BATTERY LEVEL |
---|---|
Solid Green | 100% (Charging Case = 100%) |
Breathing Green | 100% (Charging Case < 100%) |
Breathing Yellow | 16% – 99% |
Breathing Red | < 15% |
Bluetooth A2DP mode: Up to 33 hours
Ultra-low latency mode: Up to 21 hours
*Tested at 50% headphone volume, continuous playback. Using A2DP mode earbuds have up to 10 hours of battery life and up to an additional 23 hours using the charging case. Using ultra-low latency mode earbuds have up to 6 hours of battery life and up to an additional 15 hours using the charging case. Actual battery life will vary with use and maximum capacity will naturally decrease with time and usage
HyperX NGENUITY Mobile
To customize sound, controls, and other settings, please download the
HyperX NGENUITY Mobile application from iOS App Store or Android Google Play.
| Questions or Setup Issues?
Contact the HyperX support team or see the user manual at :
hyperxgaming.com/support/headsets
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
---|---
Simplified Declaration of Conformity
Hereby, HP declares that the radio equipment is in compliance with Directive
2014/53/EU. The full text of the EU Declaration of Conformity is available at
the following internet address:
www.hp.eu/certificates
UK only: Hereby, HP declares that the radio equipment is in compliance with
the relevant statutory requirements. The full text of the declaration of
conformity is available at the following internet address:
www.hp.eu/certificates
HyperX Tech support
HyperX has you covered! Got issues with your HyperX® product? Contact our
experienced team for quick response and support.
hyperx.com/support
Battery/TX Power Info
Battery Information
Earbuds contain 3.7V, 62mAh Li-ion Battery, 0.23Wh Charging case contains
3.8V, 410mAh Li-ion Battery, 1.56Wh Cannot be replaced by user.
Frequency & TX Power Information
Frequency Bands: 2.4GHz (TX Power: 8dBmTX10dBm)
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the useris encouraged to try correct the interference by one or more of
the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction manual. Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment.
CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC ID: B94-CEB003R, FCC ID: B94-CEB003L, FCC ID: B94-CEB003WA
Canada Notices This Class B digital apparatus complies with Canadian
ICES-003.
Avis Canadian Cet appareil numérique de la classe Best conforme à la
norme NMB-003 du Canada.
ISED Statement This device contains licence-exempt transmitter(s) that
comply with Innovation, Science and Economic Development Canada’s licence-
exempt RSS(s). Operation is subject to the following two conditions:
- this device may not cause interference,
- this device must accept any interference, including interference that may cause undesired operation of the device.
Turkey WEEE Statement
Wireless Earbuds
Model: CEB003C1
Model: CEB003R
Model: CEB003L
Model: CEB003WA
Model: CEB003EB
HyperX and the HyperX logo are registered trademarks or trademarks of HP Inc.
in the U.S. and/or other countries.
All registered trademarks and trademarks are property of their respective
owners.
HP Inc. 1501 Page Mill Road, Palo Alto, CA 94304, USA. HP, HQ-TRE, 71025
Boeblingen, Germany. HP Inc UK Ltd,
FCC Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can
Federal Communication Commission Interference Statement
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an
uncontrolled environment and are safe for intended operation as described in
this manual. The further RF exposure reduction can be achieved if the product
can be kept as far as possible from the user body or set the device to lower
output power if such function is available.
Industry Canada statement
Documents / Resources
|
HYPERX 4402231 Cloud Mix Earbuds Gaming Headphones with
Mic
[pdf] User Guide
CEB003R, B94-CEB003R, B94CEB003R, 4402231, Cloud Mix Earbuds Gaming Headphones
with Mic
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>