PRiMAX Virtual Reality Digital Device Instructions
- June 6, 2024
- PRiMAX
Table of Contents
Welcome to the world of virtual reality
Pimax has been committed to bringing you the ultimate VR experience hilt style ergonomic controller has the most shocking experience for you to knock on the door of Virtual World. If you want to do well, you must first sharpen your tools. Before entering the virtual world, let’s get familiar with the Sword controller first!
Install Pool
If you are using Pimax products for the first time, please visit Pimax official website to download Pool tools: pimax.com
Controller pairing
- Press and hold the System button on the controller for 3 seconds to turn on the device. When the LED strip is blue, it means the device is turned on but not paired.
- After ensuring that the Pimax helmet is connected properly, select Lighthouse in the Pool Settings – HMO page .
- Return to the main interface of Pitool click the device pairing button in the main interface, select the Sword controller, press and hold the System button and Menu button at the same time until the controller Led light flashes blue and then releases the button, then the controller enters pairing mode.
- When the LED strip is green, it means that the pairing is successful. Pair the other controller according to Pool prompts and the same operation method.
- If you use other Lighthouses to locate the headset, please click SteamVR Settings – Device – Pair Controller to enter the pairing interface, and follow step 3.
Power
- Press and hold the power button on the controller for 3 seconds to turn it on. If you have paired It with the headset before. you do not need to pair it again.
- Press and hold the Power button on the controller for more than 5 seconds to shut down.
How to use
- Hold the Controller with your hand and pull the strap to fix it (the handle will not fall off when the palm Is opened).
- The controller adapts to palms of different sizes, and you can adjust the strap bracket to achieve the best comfort.
- To remove the controller, press the strap adjustment button and loosen the strap.
safety tips:
- Please, use It carefully to prevent it from falling from a high place and causing irreversible damage.
- Contains batteries, do not put near fire or other high-temperature heat sources.
FCC STATEMENT
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>