Speakers MS-1684BT Wireless Speaker Box Instruction Manual
- June 6, 2024
- Speakers
Table of Contents
Speakers MS-1684BT Wireless Speaker Box
ACCESSORIES
- Wireless Speaker Box: 1PC
- Charging Cable: 1PC
- User Manual: 1PC
SPECIFICATIONS
Loudspeaker: 3 inch
Input voltage : DC 5V
Output power: 10W
Support: Blue-Connect, Micro SD/TF, USB, FM, EQ Mode, TWS Mode, RGB Light
Mode
Battery: built-in rechargeable 1800mAh Lithium-ion
Operation range: 10M
Frequency response: 100Hz-20KHz
Distortion: ≤10%
S/N ratio: ≥80dB
Multimedia input: Micro SD/TF, USB
FM frequency range: 87.5-108.0MhzSPECIFICATIONS
Loudspeaker: 3 inch
Input voltage: DC 5V
Output power: 10W
Support: Blue-Connect, Micro SD/TF, USB, FM, EQ Mode, TWS Mode, RGB Light
Mode
Battery: built-in rechargeable 1800mAh Lithium-ion
Operation range: 10M
Frequency response: 100Hz-20KHz
Distortion: ≤10%
S/N ratio: ≥80dB
Multimedia input: Micro SD/TF, USB
FM frequency range: 87.5-108.0Mhz
DESCRIPTION OF PARTS
- RGB light mode / Long-press can close or open the light
- EQUALIZER mode: Normal / Pop / Rock / Jazz / Country
- Volume+
- Volume-
- Previous song
- Next song
- Speaker modes button(Mode1:Blue-Connect; Mode2:FM Mode; Mode3:USB/TF) / Long-press to connected the TWS
- Play/Pause/SCAN(Auto search in FM mode) / Long-press the button can connected or disconnected the Blue-Conne
- Item number
- OFF/ON
- Mirco USB Charging port (DC 5V)
- Charging LED
- Micro SD(TF) card slot
- USB slot
HOW TO CONNECT THE WIRELESS SPEAKER
Turn on the speaker unit and the Mobile or other devices, and search for the
unit’s model name “MS-1684BT” to pair the two devices.
Once paired before, it will automatically connect after the unit is turned on.
WIRELESS
Turn on the speaker and it will come into the Wireless mode directly. After
pairing the device, it can play the music. Press button to Play/Pause. Press
button to be previous track or next track, press “VOL+” or “VOL-” button to
increase or decrease the Volume.
USB/TF CARD
Insert the U flash memory or TF card into the USB/TF slot, the speaker box
will read the MP3 format music automatically. Press button to Play/Pause.
Press or button to be previous track or next track, press “VOL+” or “VOL-”
button to increase or decrease the Volume.
PS: The memory size of USB / Micro SD devices which can be supported up
to 32GB.
FM RADIO
Press SCAN to search FM channels automatically. This operation will scan all
FM stations and Prerecord them to memory. The scan procedure will take several
minutes and cannot be interrupted. Once completed, press or button to be
previous track or next track, press “VOL+” or “VOL-” button to increase or
decrease the Volume.
RGB LIGHT MODE
There are three different RGB light modes. Short press “LED” button to switch
between different RGB modes. The last used RGB light mode will be stored in
the speaker memory before switching it off, and it will be restored once the
speaker unit is powered on the following time. Long-press the LED button can
open/close the light.
EQ MODE
There are five different EQ modes. Press “EQ” button to switch between
different EQ modes, such as Normal / Pop / Rock / Jazz / Country
TWS
Two the same model speakers can be connected to one wireless device at the
same time. First, turn the speakers on, then choose one unit and long press
its “MODE” button for several seconds; then you will hear the sound of “Ding~”
to indicate that the two units have paired successfully. Please ensure before
pairing that the two units are not connected with other devices.
CHARGING
Plug the USB cable into the speaker’s charging port and connect to the power
source.
The RED LED indicator on panel will be lit when the unit is charging. When it
full the RED LED light will close.
LED LIGHT STATUE
| Statue | Blue light | Red light |
|---|---|---|
| Quick flashing | Searching blue-connect / FM SCAN | / |
| Slow flashing | Playing | / |
| Long bright | Pause / No music playing | Charging |
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>