Shenzhen Zhongyou Juchuang Technology F9 Laptop Desk with Charger User Manual
- June 6, 2024
- Shenzhen Zhongyou Juchuang Technology
Table of Contents
Laptop Desk with Charger F9
Fill your life with convenience
Charger Specification
- Types Input: 9W2A,12V/1.5FL
- USB Output: 5W2A_ Wireless
- Charger Output:15W Time of Charge:25 —3h.
- Compatible Devices: Cellular Phones
- Model:IPhone12/12Mini/12Pro/12Pro Max/SE(2020)/11 -C /11Pro/11Pro Max/XS Max/XP/XS/X/8/8Plus;Samsung Galaxy S20/S10/S9+/S9/S8/S8+/S7edge/S7/S6edge+; USB Samsung NotelO/Note9/Note8/Note7etc.
Note:
- Adapter with 9V/2A 12V/1.5A=18W would be better to charge.
- TWo phones can’t charger at the same time or it will reduce the charging efficiency
- Indicator Light:
A. Green and red light flash once in tom, then green light steady means the
charger
B. The indicator light is steady red means charging for phone.
C. The indicator light toms green means fully charged.
Precautions
Use Instructions
1. Open the legs
2. Insert the stopper into the groove
3. Press the buttons and respectively adjust the height of the 2 legs.
4. open the buckles and adjust the tilt angle of the desktop.
Warnings
- The table legs support up to 881bs / 40kg and the storage slot up to 4.41bs / 2kg. Please do NOT overweight the desk.
- The desktop fits up to 17″ laptop and 12.9″ tablet.
- Please do NOT grab the joints of the legs to open / fold the legs in case of getting clamped.
- Height adjustment will be smoother when button built into the slot is pushed.
- Close the buckle after you have adjusted the tilt angle.
- Please do NOT scratch the PVC leather desktop with sharp items.
- If you want to fold the legs, always remember to adjust the tilt angle to 0° and adjust the legs to the shortest height first. 5
- Always keep the desktop clean and dry.
FCC Warnings Statement
Changes or modifications not expressly approved by the part/ responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there a no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Conecuh equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or mi experienced radian technician for help.
This device compress with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harm bil interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure:
A distance of 15 cm shall be maintained between the antenna and users, and the
transmitter may not be co-located with any other transmitter or antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>