ASOKO SOKO-D Motion Sensor Light Indoor, Rechargeable Under Cabinet Light Instructions

SOKO-D Motion Sensor Light
Indoor, Rechargeable Under Cabinet
Light Instructions

Installation diagram

1. Wipe the installation area clean
2. 3M tape is fixed to a piece of steel and adsorbs to the lamp built-in magnet. (Magnets are installed at both ends of the lamp.)
3. Tear the 3M adhesive paper
4. Install it where you need it

Cautions:

1. Motion sensor: The motion sensor device of the light may be affected by changes in the external environment. Do NOT use it in any environment with strong electromagnetic interference.
2. Working mode: The light will auto illuminate for 30s when someone walks by then get out in dark, the sensing distance is 10ft and range of 120° in auto mode.
3. Rechargeable: With fast-charging USB-C port, the light can be fully charged in 3 to 4 hours. Please use the cable in the package for charging, and do NOT use the light when charging to avoid any damage to the light.
4. Battery: Batteries included. Do not throw the product into the fire, or exposed to the sun. Do not use it if any leaking liquid found. Do not throw it into water.
5. Recommended environment: Recommended use temperature is 14-122℉, do NOT use the lights in a humid or hightemperature environment to avoid short-circuiting.

Who We Are:

Back to 2017, two young girls wanted buy a cabinet light can be easily installed but failed. They decided to design one, then ASOKO established.
As a young brand, we embrace the concept of good design should never be complicated.
No matter who you are, you can always find a led light in ASOKO to light up your home in a simple way.
Life should be more simple with more happiness.

Installation instruction video:

Scan to watch video

https://www.asokohome.com/installation-video-soko-d/

Caution:
A. The 3M sticker is disposable , can not be peeled off to reuse.
B. The 3M sticker cannot used to stuck on rough walls, such as brick walls, lime walls, patterned wallpapered. Recommended to use on smooth surfaces such as tiles, wood panels, etc.
C. To avoid falling, pls wait for 8 hrs to let the 3M tape to stick stable, then install the light bar.

Product specification:

Product Structure:

SOKO-D 9.4inch/240mm:

1. Recharging: Use the cable in package to charging with the USB-C port.

2. ON/OFF/AUTO: Push the toggle switch on the side of light bar to choose the mode.
   The light will stay on 2 seconds then goes off to show it is in AUTO mode.

3. Dimmable & 5 Colors: After turn light on, just tap the touch sensor to choose light colors, long press to dim.

Warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
HONGKONG YEEZEN LIGHTING CO.,LIMITED RM18 27/F HO KING COMM CTR 2-16 FAYUEN ST MONGKOK KL
Copyright © 2022 by HK Yemen Light ink Co.,Ltd

Company sales service:
support@asokoled.com MADE IN CHINA

Documents / Resources

| ASOKO SOKO-D Motion Sensor Light Indoor, Rechargeable Under Cabinet Light [pdf] Instructions
SOKO-D Motion Sensor Light Indoor Rechargeable Under Cabinet Light, SOKO-D, Motion Sensor Light Indoor Rechargeable Under Cabinet Light, Rechargeable Under Cabinet Light, Cabinet Light
---|---

References

• ASOKO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>