DREO DR-HTF007S Tower Fan with Remote User Guide
- June 14, 2024
- DREO
Table of Contents
**DREO DR-HTF007S Tower Fan with Remote User Guide
**
When using the appliance for the first time, remove the wraps and attach the parts by following the steps below.
-
Keep two base halves in a crossed position, then insert pegs on one half onto the slots on the other half.
-
Press down on edges to click two base halves together.
-
Run the cord through the center hole.
-
Fit the base onto the bottom of the fan by aligning the arrows on the underside.
-
Rotate the base counterclockwise to lock in place.
-
Thread the cord through all cord keepers and put the fan upright.
CAUTION
Do not operate the tower fan if the base has not been installed..
Make sure to thread the cord through all rear cord keepers.
Extend Warranty to 30 Months
Scan the OR code or visit dreo.com/warranty to
extend your warranty for free.\
Connecting to the Dreo App
Scan the QR code to download the Dreo app.
Search “Dreo” on Google Play or on App Store.
-
Launch the Dreo app and sign in or create account.
Tip: Verify your email address to continue, -
Tap Add Device and select the device you want to link.
Tip: Enable Bluetooth and plug in the appliance. -
Hold the button and device pairing. for 5 seconds to start network settings
Tip: The icon will keep flashing when pairing. -
Now you can control the appliance on your appl
Tip: To restart network setup. hold the button again for 5 seconds.
To learn more, please go to user manual.
support@dreo.com
(888)290-1688
Mon-Fri. 9:00 am – 5:00 pm PST/PDT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>