KUKIY HM-T36 True Wireless Earbuds User Manual

User Manual
True Wireless Earbuds

Thank you for purchasing the HM-T36 True Wireless Earbuds. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents

Product Diagram

Specifications

Earbuds

Charging Case

Getting Started

Charging
Fully charge the charging case before first use. To charge, connect the case to a USB charger or charging port with the included USB A to C cable. When the LED Charging indicator on the outside of the case turns off, the case is fully charged. Charging takes less than 3 hours, then the case can offer a full charge of the earbuds 5 times. The earbuds should be stored in the case when not in use.

Turning On / Off

Turn On| Open the lid of the charging case or touch and hold on the touch- sensitive panels on both earbuds  for 2 seconds when they are turned off
---|---
Turn Off| Return both earbuds to the charging case and close the lid after 3 seconds the earbuds will  automatically turn off or touch and hold the touch- sensitive panels on both earbuds for 5 seconds  when they are turned on

Pairing
Starting with the earbuds in the case:

1. Open the lid of the charging case, enter pairing mode
2. Turn on the pairing function via BT on the device you want to pair with the earbuds from the list of available devices, find and select “KUKIY-T36”

Regular Use After Pairing
Once the earbuds are successfully paired with your device, they can be switched on and off as follows:

• Open the lid of the charging case, then both earbuds will turn on and connect with each other automatically
• To turn off, put the earbuds back in the charging case and close the lid, they will begin charging

Using the Left/Right Earbud Only
Taking Calls Starting with the earbuds in the case:

1. Take the left/right earbud out
2. Turn on the pairing function on the device you want to pair with the earbud
3. From the list of available devices, find and select “KUKIY-T36”

Reset the earbuds
Starting with the earbuds in the case:

1. Take both earbuds out of the charging case and the earbuds will turn on. Touch and hold the touch-sensitive panels on both earbuds for 5 seconds to turn them back off
2. Touch and hold the touch-sensitive panels on both earbuds for 10 seconds. The earbuds will turn on, clear their pairing list, and turn off again
3. Put both earbuds back in the charging case and close the lid (waiting for 3s) to rese
4. Open the lid again, both earbuds will turn on and enter pairing mode

Notes

• When you turn on the earbuds, they will be automatically reconnected to the previous-paired device or enter pairing mode, if no paired device is found
• Either the left or right earbud can be used individually once connected to your device when you keep the other one inside the charging case
• The wireless operating range is more than 10m (33ft). If you exceed this range, the earbuds will lose connection with your paired device. The connection will be re-established if you re-enter the wireless range within 5 minutes or the earbuds will be turned off automatically after 5 minutes

Controls & LED Indicators

Streaming Audio
Once paired, you can wirelessly stream audio on your device via earbuds. Music will automatically get paused when you receive an incoming phone call and will be resumed once the call ends

earbud
Skip to the next track| Triple-tap the touch-sensitive panel on the right earbuds
Volume up| Tap the touch-sensitive panel on the right earbud once
Volume down| Tap the touch-sensitive panel on the left earbud once

Taking Calls

Answer a call| Double-tap the touch-sensitive panel on either earbud to answer a call
---|---
End a call or reject an incoming cal| Touch and hold the touch-sensitive panel on either earbud for 2 seconds
Activate Siri or other voice assistants| Tap 4 times the touch-sensitive panel on either earbud
LED Battery Level Indicator| Status
---|---
The charging case light stays on for 10 seconds| More than 30% of battery
Fast flashing 10 times| The battery is less than 30%
Open the lid light does not light up, need to charge| Light off

FAQ

The earbuds are on, but not connecting to my device
For the earbuds and your device to establish a connection, you need to put them both in pairing mode. Please follow the instructions in the Pairing section of this manual.

I’ve connected the earbuds with my smartphone but can’t hear any sound
Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before the audio can be transmitted. If you’re using a music player or other device, please make sure it supports the A2DP profile.

The sound isn’t very clear or the caller can’t hear my voice clearly
Adjust the volume on your smartphone and the earbuds. Try moving closer to your smartphone to rule out the possibility of interference or wireless range- related issues.

The maximum range is more than 10m (33ft).
However, the actual range depends on environmental factors. For optimal performance, keep your device connected within a range of roughly 4m to 8m and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your device.

The earbuds won’t turn on
Try charging the earbuds for a while. If the earbuds still won’t power on, please contact our support team at the email address given in Warranty & Customer Support.

I put the earbuds back in the charging case, but the earbuds are still connected
The charging case is probably out of power. Try charging it.

Product Care & Use connected 

• Keep away from liquids and extreme heat
• Don’t use the earbuds at high volume for extended periods, as this may cause permanent hearing loss or damage

Warranty & Customer Support
For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.
Customer Support:info@channellx.com

FCC warning statements:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.

Shenzhen Hong meng e-commerce Co., Ltd
Customer Support: info@channellx.com
Room No.2112, Pingxin North Road No.51, Pinghu Street,
Longgang District, Shenzhen, Guangdong Province, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>