Xiaomi M56 Wireless Charging Pad Instruction Manual
- June 6, 2024
- Xiaomi
Table of Contents
- Please Read First for Safe Use
- DANGER
- WARNING
- CAUTION
- Accessories
- Product Features
- Precautions for Use
- How to Use
- Connect Cable
- Begin Charging
- Finish Charging
- How to View the LED Display
- Main Product Specifications
- If there appears to be a Malfunction
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Instruction manual
Instruction manual Serial No. 9YYA18-EN1 (Y2108)
Please Read First for Safe Use
The precautions outlined here are meant to reduce the chance of harm or damage to you and others. Please be sure to follow these guidelines.
Symbols | Indicate prohibited conduct (what you must not do). |
---|
Indicates caution.
DANGER
Conduct that may cause substantial harm or damage.
**| Do not charge devices while they are in contact with your body, such
as when it is placed in your pocket. This may generate heat and cause burns.
---|---
**| Do not place this product near fire or heat sources. This may cause
substantial harm or damage.
**| Do not supply power by any method other than specified or use
equipment with a voltage/current that exceeds the input specifications. This
may cause harm or damage.
**| Do not place this product in cooking devices (including microwave
ovens and high-pressure containers). This may cause harm or damage.
**| Do not supply power near IH cookware. IH cookware shares the same
frequency band as the Qi standard. Using this product to supply power when
near IH cookware may cause the product to malfunction, overheat, or break
down.
**| Do not disassemble or modify the product. This may cause harm or
damage.
**| Do not use in humid places, such as bathrooms and near humidifiers.
This may cause harm or damage.
**| Immediately discontinue use of the product, cable, or charging
device exhibits abnormalities, such as smoke, damage, heat, deformation,
unusual odor, or unusual sounds. This may cause harm or damage.
| If you wear any medical devices, consult with your doctor before use.
This product may affect the operation of medical electrical equipment.
**| Do not use it in the car**. This may affect the operation of
equipment, such as anti-theft systems for cars.
WARNING
Conduct that may cause death or serious injury.
**| Keep out of the reach of infants at all times. This may cause harm
or damage.
---|---
**| Do not allow this product to come into contact with liquids. This
may cause harm or damage.
**| Do not touch the USB cable with wet hands. This may cause harm or
damage.
| Fully and securely insert the USB cable terminal. If the USB is not
fully inserted, this may cause harm or damage to the product.
**| Do not place anything other than standard-compliant equipment on
this product. This may cause harm or damage.
**| Do not place metal objects or objects that contain metal, between
the surface supplying power and the device being charged. This may cause
harm or damage.
**| Do not insert metal into the terminal. This may cause harm or
damage.
**| When there is thunder, do not touch this product or compatible
devices. This may cause harm or damage.
**| If charging is not completed, even after the specified charge time
has exceeded, stop charging. This may cause harm or damage.
**| Do not use anything other than the included cable. This may cause
harm or damage.
**| Do not cover or wrap this product with a cloth or futon when power
is being supplied. This may cause harm or damage.
**| Do not subject this product to strong impacts, such as dropping or
throwing this product. This may cause harm or damage.
**| Do not place heavy objects on the USB cable or this product. This
may cause harm or damage.
**| Do not supply power from a car’s cigarette lighter socket.** This
may cause harm or damage.
** CAUTION**
Conduct that may cause injury or physical damage.
| When used by children, guardians should read the instruction manual
carefully and instruct children on proper usage. Be sure to maintain proper
usage of this product, especially while charging.
---|---
| Place on a stable and level surface. Placing the product on an inclined
or unstable surface may cause it to fall and cause injury or damage.
**| Do not place near magnetically sensitive objects. Items such as
credit cards, smart chip cards, and debit cards, may break or records may be
wiped due to magnetic properties and heat. If cards are stored in the case,
remove them before product use.
| Remove the USB cable from this product when the product is not being used
for an extended time. This may cause harm or damage.
**| Do not use in places such as the following.
This may cause harm or damage.
- Near fire
- Near heating devices
- Under an electric blanket
- Places exposed to direct sunlight
- Places where the temperature is 0 ℃ or lower and 40 ℃ or higher
- Places where a lot of dust is generated
**| Do not connect this product using a USB hub.** This may cause harm or damage.
Accessories
-
The diagram is for explanatory purposes; the actual shape of the product may differ.
-
Instruction manual (this document)
Product Features
This product is a certified device of the “Qi” wireless charging standard.
WPC Qi Certified
WPC (Qi) Certification Number: QI-ID12098
- The device to be charged does not need to be connected with a cable as devices, such as smartphones that conform to Qi standards, will charge just by placing them on the product.
- This product comes with a protective function that stops the power supply to the device when overcurrents are detected. The power supply will resume when the charging device is removed for 5 seconds and placed back on the product.
- Maximum 10W quick charge is possible (QC 3.0 compatible).
- This product comes with a foreign matter detection function that stops power supply when it detects foreign matter, such as metal.
- The LED indicates the power supply status.
Precautions for Use
Back up the memory on the device to be charged before using such a device with this product.
- Prepare a USB-AC adapter (5V/2A or more recommended) separately.
- While power is being supplied, this product and the device being charged may become warm, but this is not abnormal. If the temperature rises while power is being supplied, it may stop charging due to the protection function on the charger. Wait until the temperature of the device to be charged has cooled down sufficiently before supplying power again. • Charging may not work or become unstable if a case with a thickness of more than 4 mm or a metal case is attached.
- Noise may occur if used near radios or similar.
- For devices to be charged with a vibration function, the device may fall from the product due to it vibrating, so turn off the vibration function before use.
- It is not possible to supply power to multiple devices to be charged at the same time.
- This product is meant for general household use. Do not use it for business purposes or for situations similar to business use.
- This product is not intended to be used for facilities and equipment involved with human lives, such as medical equipment, nuclear equipment, aerospace equipment, transport equipment, as well as facilities and equipment that require a high degree of reliability, so do not use this product for such purposes. The company is not responsible for any personal injury or social damage caused by using this product.
- The company is not liable for any damages caused by using this product.
The duplication and modification of this instruction manual are prohibited. Please note that our company is not responsible for any expenditure, monetary losses, or other losses caused by the use of this product.
How to Use
Connect Cable
Prepare a USB-AC adaptor (5V/2A or more recommended) separately.
(1) Connect the USB connector (Type-C) of the included USB cable with the
input terminal of the main unit.
(2) Connect the USB connector (Type-A) of the included USB cable with a
commercially available USB-AC adapter.
(3) Connect the USB-AC adapter to a household power outlet.
(4) When the power is turned on, the LED on the main unit will light up, and
turn off after approximately 1 second.
DANGER
| If you wear any medical devices, consult with your doctor before use.
This product may affect the operation of medical electrical equipment.
---|---
**| Do not use it in the car.** This may affect the operation of
equipment, such as anti-theft systems for cars.
WARNING
**| Do not place metal objects or objects that contain metal, between
the surface supplying power and the device being charged.** This may cause
harm or damage.
---|---
Do not place near magnetically sensitive objects.
Items such as credit cards, smart chip cards, and debit cards, may break or
records may
be wiped due to magnetic properties and heat. If cards are stored in the case,
remove them
before product use.
CAUTION
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum
distance between 20cm of the radiator of your body.
Begin Charging
(1) Place devices to be charged, such as a smartphone, in the power supply
area.
(2) When the device begins to charge, the LED lamp on the main unit will light
up.
If the LED lamp does not light up, reposition the device and place it in an
area that lights up the LED lamp.
- This product has a power transmission coil, and each device to be charged has a power reception coil built-in; power is supplied from electromagnetic induction generated when the power reception coil comes near the power transmission coil that has received the electrical current.
- The position in which the power reception coil had been installed in the device to be charged may differ depending on the type of device. Adjust the position in which the device to be charged is placed within the power supply area by turning it upside down and such.
- This does not guarantee that power will be supplied to all devices.
When Abnormalities are Detected
The LED lamp will blink when abnormalities, such as those outlined below, are
detected:
- The device to be charged is placed outside the power supply area.
- The device to be charged does not support Qi.
- Foreign matters such as metal pieces are caught in between the main unit and the device to be charged.
- If the device to be charged has a case attached, depending on the material and thickness of the case, the device may not charge normally. Remove the case beforehand to charge normally.
Finish Charging
How to handle the USB connector
- Check the status of the charge through the display on the device side.
- When disconnecting the USB cable, be sure to hold the connector and pull it straight out.
Good example Bad example: Easy to break
How to View the LED Display
Status of Main Unit | LED Display Status |
---|---|
Power ON (device to be charged is not placed) | The light turns off after |
turning on for about 1 second
Supplying power| Light remains on
When the device to be charged is removed| The light turns off after being on
for about 3 minutes
Error| Light continues to blink
- The LED display that indicates when the device is fully charged differs by the type and function of each device to be charged.
Main Product Specifications
Standard | Qi (Version 1.2.4) |
---|---|
Input | 5V/9V *Supports QC 3.0 |
Output | 5W / 7.5W / 10W |
Input Terminal | USB Type-C |
USB Cable | Connector type: USB Type-A / USB Type-C Cable length: Approximately |
120 cm (including connector)
Main Unit Size| Approximately W 100 x D 100 x H 12 (mm)
Mass| Approximately 62 g
-
Product specifications are subject to change without notice for improvement.
- Qi is a registered trademark of Wireless Power Consortium.
- USB Type-C TM is a registered trademark of USB Implementers Forum.
- All other product names or otherwise mentioned within the text are registered trademarks of each respective manufacturer. The TM mark is not specified within the text.
If there appears to be a Malfunction
If the device to be charged does not charge or is taking too long to charge, please refer to the following table. If the matter cannot be resolved, please contact SQUARE ENIX Customer Support. https://sqex.to/MDINFO
Issue | Solution |
---|---|
The power source for the USB may not be turned on. | Check the power connection |
of the power supply source, such as securely inserting the USB-AC adapter
(sold separately) into the outlet.
The USB connector may be loose or unplugged.| Check to see that the USB cable
is properly connected.
A USB cable other than the one included may be in use.| Use the included USB
cable.
Power may not be supplied when using a USB-AC adapter that exceeds 5V rated
output voltage.| Use equipment with a rated output voltage of 5V.
The device to be charged may not be
compatible with the “Qi” standard.| Check to see if the device is compatible
with the “Qi” standard.
The rated output for the power source of the USB may be too low.| Use a USB-AC
adapter (sold separately) of 5V/2A or more.
It could be out of the usage temperature range.| Supply power within the
operating temperature range.
The device to be charged could be placed outside the power supply area.|
Adjust the position of the device to be charged.
Foreign matter such as metal pieces may be caught between the power supply
surface and the device to be charged.| Remove the foreign matter and place the
device to be charged back on the unit after approximately 5 seconds; the power
supply will resume.
Charging may not work or become unstable if a case with a thickness of more
than 4 mm or a metal case is attached.| Remove the case to charge.
If the temperature rises while power is being supplied, it may stop charging
due to the protection function on the charger.| Before resuming the power
supply, ensure that the device to be charged has sufficiently cooled down.
This product comes with a protective function that stops the power supply to
the device when overcurrents are detected.| Remove the device to be charged
and place it back on after 5 seconds; the power supply will resume.
The device to be charged may be in use while power is being supplied.| Be
mindful that if the device to be charged is in use while power is being
supplied, it will extend the time it will take to charge.
- Depending on the type of device, or if the battery level on the device to be charged is depleted, it may take longer to start up or power may not be supplied.
This product complies with the EMC and RoHS requirements of the European Community.
This symbol on the product, packaging, and accompanying documentation indicates that this product should not be disposed of with normal household waste. This product shall be taken to the applicable collection point for recycling. If you ever need to throw it away, please contact the shop where you purchased the product or your local authority.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>